• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.4
• /
• pp.157-165
• /
• 2019

Recently, lean duplex stainless steel, STS329FLD with less nickel (reduced to 0.5~1.5%) has been developed as a substitute of austenitic stainless steel (8%~10.5% nickel in STS304) and included in Korean standards (KS). This paper investigates the block shear behavior of cold-formed duplex stainless steel (STS329FLD, nominal plate thickness of 1.5mm) fillet-welded connection with base metal fracture. Main variables are weld lengths in the longitudinal and the transverse directions of applied force ranged from 20mm to 50mm. As a result, specimens failed by typical block shear facture (the combination of gross section tensile fracture and shear fracture or shear yielding) and ultimate strength of the specimens got higher with the increase of weld length. Block shear fracture strengths predicted by current design specifications (KBC2016/AISC2016 and EC3) and existing proposed equations for welded connections by Topkaya, Oosterhof & Driver and Lee et al. were compared with test strengths. KBC2016/AISC2016 and EC3 design specifications underestimated block shear strength of STS329FLD welded connections by on average 24%, 29%, respectively and Oosterhof & Driver, Topkaya and Lee et al's equations overestimated the ultimate strength of the welded connection by the range of 3% to 44%.

• Journal of the Korean Institute of Educational Facilities
• /
• v.14 no.4
• /
• pp.75-85
• /
• 2007

The purpose of this study is to find out the characteristics of physical planning elements in the pedestrian malls when cultural events for young ages proved; the planning strategies for the regeneration of the block of Kyungchun-railroad track, which is removing planned in campus surroundings. Local Government' initiation makes possible to make improvement and give administrative and financial support which is sensitive to the existing conditions of railroad for the better living environment. Thus, this research suggests how the block of Kyungchun-railroad track, which is removing planned, as a newly organized pedestrian mall design system can cope with collaborating a board and community, which has in campus surroundings related. This study consists of following four parts; 1. six-case pedestrian mall in campus surroundings in Seoul were analyzed in terms of physical and cultural factors for young ages between university and community. 2. we focused on the analysis of correlation between the physical planning factors and the spatial requirements for cultural event when the pedestrian mall in campus surroundings is designed. The paper's significance lies in that it shows a new direction in urban renewal planning and design which has been made into a pedestrian mall plan through in support of the application to the pilot project compared with previous physical environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2551-2556
• /
• 2009

The principal operation of a ring laser gyroscope depends on the phase difference for the counter-propagating waves within a closed path. The reflection mirrors mounted on the resonator block form the traveling waves. Thus, the dimension accuracy of resonator block influences the traveling path of beam. In order to maintain the stable optical beam path in the ring resonator, the piezo-driven moveable mirror is adopted for the path length control under the thermal expansion or mechanical strain of resonator block. This paper presents the mathematical description of the elastic behavior of piezo-driven mirror. This description can be applied for the concept design of piezo-driven mirror.

• KIEAE Journal
• /
• v.13 no.3
• /
• pp.105-110
• /
• 2013

Green roof system is classified as intensive greening, extensive greening or mix of intensive-extensive greening. Recently, light-weigh green roof has been performed actively, because buildings have been considered loads, design and maintenance. This study was conducted to design soil depth for light-vegetation block with using bottom-ash. As a result, it was found that growth of plant had no direct effect on soil depth even it was less than 10cm. Soil depth having under 5cm could be integration of plant roots and vegetation blocks. It was also possible to grow organic vegetables through the experiment of planting. According to this experiment, as light-vegetation block with bottom-ash was used for planting, it makes design shallow soil depth. The results will help install green roof system conveniently not only new buildings but also used buildings.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1365-1381
• /
• 2023

In this paper, a procedure for evaluating the structural integrity of the PCSG (Printed Circuit Steam Generator) unit block is presented with a simplified FE (finite element) analysis technique by applying the homogenization method. The homogenization method converts an inhomogeneous elastic body into a homogeneous elastic body with same mechanical behaviour. This method is effective when the inhomogeneous elastic body has repetitive microstructures, and thus the method was applied to the sheet assembly among the PCSG unit block components. From the method, the homogenized equivalent elastic constants of the sheet assembly were derived. The validity of the determined material properties was verified by comparing the mechanical behaviour with the reference model. Thermo-mechanical analysis was then performed to evaluate the structural integrity of the PCSG unit block, and it was found that the contact region between the steam header and the sheet assembly is a critical point where large bending stress occurs due to the temperature difference.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.4
• /
• pp.683-691
• /
• 2012

In $4{\times}4$ graeco-latin square design, powers of rank transformed statistic for testing the main effect are superior to powers of parametric statistic without regard to the effect structure with equally or unequally spaced effect levels as well as the type of population distributions such as exponential, double exponential, normal and uniform distribution. As numbers of block effect or effect sizes are decreased, powers of rank transformed statistic are much higher than powers of parametric statistic. In case that block effects are smaller than a main effect or one block effect is higher than other block effects, powers of rank transformed statistic are much higher than powers of parametric statistic in $4{\times}4$ graeco-latin square design with three block effects and one main effect.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.608-612
• /
• 2023

Nano-diamond (ND) was added during the carbon block preparation process to increase the thermal conductivity of the carbon block. Added ND controlled the generated pore of carbon block due to the volatilization of the binder pitch during the carbonization process. The ND was added to the kneading process of coke and binder pitch, and carbon blocks were prepared by pressing and carbonization. As the amount of added ND increased, the ND ratio of the carbon block increased. The added ND made a pass-way for generated gas by volatilizing the binder pitch during the carbonization process, increasing the density of the carbon block and reducing the porosity. The thermal conductivity of the carbon block was improved by increased density, lowered porosity, and the high thermal conductivity of added ND.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.47-56
• /
• 1998

Designing Trim die block is a complicated and time-consuming process heavily resting on the experience of the designer. To reduce design time and human errors, a knowledge base is used to automated the design process. In this paper, a framework of the Rule-based CAD System is presented for trim die block design consisting of a rule-base, design process control module and geometric modeler (CATIA). The rule-base includes design rules and know-how of design specialist. CATIA is used as the overall CAD environment and rule-base and design control modules are developed by C++ language with an interface to CATIA. Using the rule-base, the designer can explore alternating designs fast by changing design parameters and the part-list is automatically created which avoids miscommunication.

• ETRI Journal
• /
• v.22 no.1
• /
• pp.20-29
• /
• 2000

In this paper, we present a design of video and audio single chip encoder/decoder for portable multimedia application. The single-chip called as video audio signal processor (VASP) consists of a video signal processing block and an audio single processing block. This chip has mixed hardware/software architecture to combine performance and flexibility. We designed the chip by partitioning between video and audio block. The video signal processing block was designed to implement hardware solution of pixel input/output, full pixel motion estimation, half pixel motion estimation, discrete cosine transform, quantization, run length coding, host interface, and 16 bits RISC type internal controller. The audio signal processing block is implemented with software solution using a 16 bits fixed point DSP. This chip contains 142,300 gates, 22 Kbits FIFO, 107 kbits SRAM, and 556 kbits ROM, and the chip size is $9.02mm{\times}9.06mm$ which is fabricated using 0.5 micron 3-layer metal CMOS technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.8
• /
• pp.648-658
• /
• 1990

There are many methods for speed up counting in speech recongition. A multiple processing method is the one way to achieve the aim using systolic array. This arithmetic operation by the array is achieved pipelining skill. And the operation is multiprocessing by processing element(PE) that is incresing counting efficiencies. The DTW PE cell is seperated into three large blocks. "MIN" is the one block for counting accumulated minimum distance, "ADD" block calculated these minimum distances, and "ABS" seeks for the absolut values to the total sum of local distances. We have accomplished circuit design and verification about the "ADD" and "ABS" blocks, and performed total layout '||'&'||' DRC(design rule check) using 3um CMOS N-Well rule base.le check) using 3$\mu$m CMOS N-Well rule base.