• The Journal of Advanced Prosthodontics
• /
• 제12권5호
• /
• pp.259-264
• /
• 2020

PURPOSE. The aim of this study was to investigate and compare the color stability of provisional restorative materials fabricated by 3D printing, dental milling, and conventional materials. MATERIALS AND METHODS. For the experimental groups, two commercially available 3D-printing provisional resins (E-Dent 100; EnvisionTEC GmbH, Germany & VeroGlaze™; Stratasys^®, USA), two dental milling blocks (PMMA Disk; Yamahachi Dental Co., Japan & Telio^®CAD; Ivoclar Vivadent AG, Liechtenstein), and two conventional materials (Alike™; GC Co., Japan & Luxatemp automix plus; DMG, Germany) were used. The water sorption and solubility test were (n=10, respectively) carried out according to ISO4049:2000 (International Standards Organization, Geneva, Switzerland). For the color stability test (n=10), coffee and black tea were used as staining solutions, and the specimens were stored for 12 weeks. Data were analyzed by one-way ANOVA and Tukey's HSD using SPSS version 22.0 (SPSS Inc. Chicago, IL, USA) (P<.05). RESULTS. Alike and Veroglaze showed the highest values and Luxatemp showed the lowest water sorption. In the color stability test, the ΔE of conventional materials varied depending on the staining solution. PMMA milling blocks showed a relatively low ΔE up to 4 weeks, and then significantly increased after 8 weeks (P<.05). 3D-printed materials exhibited a high ΔE or a significant increase over time (P<.05). CONCLUSION. The degree of discoloration increased with time, and a visually perceptible color difference value (ΔE) was shown regardless of the materials and solutions. PMMA milled and 3D-printed materials showed more rapid change in discoloration after 8 weeks.

• 대한수의학회지
• /
• 제37권3호
• /
• pp.463-469
• /
• 1997

This study was performed to investigate the gross anatomical features and microscopical structures of the hemal nodes and the hemolymph nodes in the water deer (Hydropotes inermis) found in Kangwon-do, Korea. The hemal nodes and hemolymph nodes were observed mainly in the periphery of the thoracic and abdominal aortae of the animals. The size of hemal nodes was generally smaller than that of the hemolymph nodes, and the shape of the both organs was spherical or ovoid. The color of the hemal nodes was red or black while that of the hemolymph nodes was gray with red bands. The hemal nodes were surrounded by a thin connective tissue capsule and there were extensive subcapsular and deep sinuses distended by a great number of erythrocytes. Although a few number of lymphatic nodules and small areas of diffuse lymphatic tissues were observed in the parenchyma, no typical cortex and medulla were defined in the hemal node. Small numbers of blood vessels were found at the connective tissue capsule but lymph vessel was not observed microscopically in this organ. The hemolymph nodes were covered by a relatively thick connective tissue capsule and there was a hilus in each node. The parenchyma was divided into cortex and medulla. The cortex was composed of a few numbers of lymphatic nodules and some diffuse lymphatic tissues. The medulla comprised medullary sinus and cords. Afferent and efferent lymph vessels were observed at the periphery of the capsule and the hilus, respectively. The subcapsular and medullary sinuses were not extensive but filled with small numbers of erythrocytes. The stroma of hemal node and hemolymph node was composed of reticular cells and fibers, and the capsule and trabecula consisted of collagenous fibers with smooth muscle fibers.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.854-860
• /
• 1997

The tribological property of ceramics is very important for use in seal rings, pump parts, thread guides and mechanical seal, etc. In the present study, which RBSC/graphite composites were manufactured by adding graphite powders with different particle sizes to mixtures of SiC powder, metallic silicon, carbon black and alumina, effects on the tribological property of each RBSC/graphite composite was investigated in accordance with the particle size of the added graphite powder. The water absorption, the bending strength and the resistance for the friction and wear were measured, and the crystalline phase and the microstructure were respectively examined by using XRD and SEM. In case that the particle size of the graphite powder was fine(2${\mu}{\textrm}{m}$), the formation of $\beta$-SiC was accelerated, thereby making the increase of the bending strength and the decrease of the water absorption, but no improvement for the tribological properties. Furthermore, in case that the particle size of the graphite powder was some large(88~149${\mu}{\textrm}{m}$), the formation of $\beta$-SiC was not accelerated, to thereby make the decrease of the bending strength and the increase of the water absorption, but the improvement for the tribological property of only the composite having the graphite powder of 20 vol%. In addition, in case that the particle size distribution of the graphite powder was large (under 53 ${\mu}{\textrm}{m}$), there was no improvement for every properties. However, the composites, which the graphite powder with the particle size of 53~88 ${\mu}{\textrm}{m}$ was added in 10~15 vol%, had the most increased resistance for the friction and wear which show the worn out amount of 0.4~0.6$\times$10-3 $\textrm{cm}^2$, and the value of the bending strength is 380~520 kg/$\textrm{cm}^2$.

• 대한환경공학회지
• /
• 제28권5호
• /
• pp.558-562
• /
• 2006

여과공정에서 망간제거특성을 고찰하기 위하여 모래, 망간사 등의 4가지 여재를 사용한 여과실험이 실시되었다. 여과속도는 123 m/d였고, 칼럼당 유입량은 $3.9m^3/d$이었다. 실험기간은 약 1년이었으며, 실험기간 동안 여재별로 이산화망간 부착량, 탁도제거율, 망간제거율, 유기물제거율 등을 고찰하였다. 평균 망간농도 0.208 mg/L의 여과지 유입수(잔류염소 1.0 mg/L)를 사용하여 여과실험한 결과 모래+망간사 칼럼은 98.9%, 망간사칼럼은 99.2%의 망간제거율을 보였다. 기존 모래여과지를 망간제거를 위해 사용할 경우 여층의 전부를 망간사로 교체하지 않고 일부만 교체하여도 망간제거에 충분한 효과가 나타나는 것으로 조사되었다.

• 한국식품위생안전성학회지
• /
• 제3권4호
• /
• pp.217-223
• /
• 1988

For the Effective utilization of the fish resources in coastal regions, investigations on preparation of powdered dried arkshell instant soup., quality stability of the products during storage and utilization as a food material were carried out with arkshell, Anadara broughtonii. Three kinds of powdered instant soup were prespared as 0% table salt(A), 5% table salt (B), 15% table salt(C) and packed with vacuum in laminated film bag. (polyester/nylon: 85${mu}ell$/15${mu}ell$, 18$\times$27cm) Their processing conditions and quality stability during storage at room temperature for 90 days were examined. Powdered instant soup was made by washing raw arkshell to remove visceral, clay, sand and blood, hot air drying(60$\pm$1$^{\circ}C$, 20 hrs) after draining and pulverizing dried arkshell to 35 mesh. Powdered instant soup was made by adding 2% sugar 0% table salt (5% and 15% table salt), 10.5% monosodium glutamate, 0.3% black pepper and 0.3% garlic powder to the pulverized dried arkshell. The condition of moisture and water activity of the products were 5.9-6.9% and 0.42-0.43, respectively. The moisture content s , water activity and pH of the products were showed little change and volatile basic nitrogen of them increased slightly during storage. Thiobarbituric acid value increased up to 60 days of storage and then decreased slightly. In solubility, powdered instant soup were showed no remarkable difference comparing with goods on the market. The color value of th products were showed little change during storage, In sensory evaluation, product B were scored slightly higher, in most cased, in flaver, color. taste and overall acceptability comparing with product A or product C during storage. Judiging form the sensory evaluation, powdered instant soup of 5% table salt (B) were the most desirable, and the quality of the products was stable for 90 days at 20$\pm$3$^{\circ}C$.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제37권2호
• /
• pp.36-42
• /
• 2018

Recently, silk sericin has attracted attention because of its unique properties as a biomaterial, including its UV resistance, moisturizing effect on skin, and wound-healing effect. Therefore, the preparation of sericin in various forms such as gel, film, fiber, and sponge is studied for cosmetic and biomedical applications, and the effect of the preparation conditions on the structure and properties of sericin forms is examined to maximize its performance. In this study, silk sericin films were prepared under different preparation conditions and heat-treated at high temperatures ($100-250^{\circ}C$) to examine the effect of heat treatment on the film structure. The order of the crystallinity index of the untreated sericin film is as follows: F25 (sericin film cast from formic acid) > WE25 (ethanol treated sericin film cast from water at $250^{\circ}C$) > W25 (sericin film cast from water at $250^{\circ}C$) > W100 (sericin film cast from water at $100^{\circ}C$). As the heat-treatment temperature was increased, the color of the sericin films changed gradually from colorless to yellow, brown, and black depending on the temperature. The crystallinity of the sericin film changed after the heat treatment, depending on the preparation condition. Whereas a sericin film cast from formic acid (F25) started to lose its crystallinity at $200^{\circ}C$, thus undergoing the highest loss of crystallinity among the sericin films studied, the rest (W25, WE25, and W100) showed a decrease in crystallinity at $250^{\circ}C$, owing to the disruption of the ${\beta}$-sheet crystallites due to heat.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.589-596
• /
• 2019

Pigments with minute particle sizes, such as carbon black (CB) and pigment red 48:2 (P.R.48:2), are the most important types of pigment and have been widely used in many industrial applications. However, minute particles have large surface areas, high oil absorption and low surface energy. They therefore tend to be repellent to the vehicle and lose stability, resulting in significant increases in viscosity or reaggregation in the vehicle. Therefore, finding the best way to improve the dispersion properties of minute particle size pigments presents a major technical challenge. In this study, minute particle types of CB and P.R.48:2 were treated with nitrogen gas plasma generated via radio frequency-plasma enhanced chemical vapor deposition (RF-PECVD) to increase the dispersion properties of minute particles in deionized (DI) water. The morphologies and particle sizes of untreated and plasma treated particles were evaluated using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The average distributions of particle size were measured using a laser particle sizer. Fourier transform infrared spectroscopy was carried out on the samples to identify changes in molecular interactions during plasma processing. The results of our analysis indicate that N2 plasma treatment is an effective method for improving the dispersibility of minute particles of pigment in DI water.

• 지질공학
• /
• 제32권1호
• /
• pp.101-111
• /
• 2022

본 연구는 초분광 영상의 반사율과 탁도 관계를 해석하는 것이 목표로써 실험수조에 탁수를 발생시킨 후 드론 기반의 초분광 영상촬영을 수행하였으며 측정된 탁도와 반사율의 상관관계를 분석하였다. 실험에 사용된 9개 수조는 모든 빛을 흡수할 수 있는 흑색 아크릴로 제작하였으며 토양은 임하호 탁수 발생의 원인이 되는 창하천 하류에서 채취하였다. 연구결과, 근적외선 영역에서 파장에 따른 반사율은 전반적으로 유사한 패턴으로 나타났으며, 탁도가 높은 Box일수록 반사율이 증가하였다. 또한 각 Box에서 측정한 탁도와 평균반사율의 상관관계를 분석한 결과 결정계수는 0.8702로 매우 높게 나타나 반사율을 이용한 탁도 예측이 가능한 것으로 나타났다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.128-128
• /
• 2020

최근 농업환경의 변화와 기후변화에 대응하기 위해 농업용수 관리 정보화 및 과학화의 필요성이 증대되어 실시간으로 저수지 저수량과 농업용수 공급량을 파악하기 위해 자동 수위계측시설이 도입되었다. 농림축산식품부의 저수지 자동수위측정기 설치 및 운영지침에 따라 현재 농어촌공사 관리 저수지 1,734개소 및 수로부 1,880개소에 자동수위계가 설치되어 있으며, 저수지와 수로에서 10분 간격으로 수위자료가 생성되고 있다. 농업용 저수지 수문자료의 공인지점은 2016년 6개소에서 2019년 49개소로 증대되고 있으며, 데이터 품질 저하의 최소화 및 신뢰성 있는 수문자료 생성의 필요성이 증가함에 따라 농업용 저수지의 특성을 반영한 저수지 수위 오결측 데이터 보정 방안 및 수문 자료 품질관리 방안이 요구된다. 농업용 저수지의 수위 변화 및 강우-유출 현상은 물리적 모형을 구축하여 기상, 지형 등 영향 인자와 수위(또는 유출)와의 상관관계를 분석하는 것은 무적으로 불가능하였지만, 최근 인공신경망 (Artificial Neural Network, ANN) 등과 같이 black-box 형태의 모형을 이용하여 비선형적인 수문해석이 가능해졌다. 본 연구에서는 빅데이터와 인공신경망을 결합시킨 알고리즘인 딥러닝 (Deep Learning) 기반의 LSTM (Long Short-Term Memory) 모형을 활용하여 농업용 저수지 수위자료를 검토하여 자동계측기에서 발생하는 오류 보정을 위해 품질관리 방안을 제시하고자 한다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.338-338
• /
• 2020

강우-유출 모형에 의한 유출해석은 하천의 기후변화 및 재난대응, 수자원확보, 유역개발 등의 정책수립을 위한 가장 기본적인 과정이다. 이를 위해 다양한 물리적 강우-유출모형이 개발되었으며 많은 연구들에 의해 유용성이 증명되었다. 그러나 메콩강 유역과 같이 물리적 데이터의 양적, 질적 신뢰도가 부족한 지역을 대상으로 하는 경우 모형의 기본적인 불확실성 외에 다양한 기초자료 및 매개변수의 결정 또는 추정에 의한 추가적인 불확실성이 포함된다. 본 연구에서는 물리적 강우-유출모형에 대한 대안으로 데이터 기반의 black-box 모형인 LSTM 모형을 이용하여 메콩강 본류 Kratie지점을 대상으로 강우-유출해석시스템을 구축하였다. 이후 기후변화시나리오를 적용하여 미래유출변화를 모의를 수행하였다. 도출된 결과는 물리적 강우-유출모형인 SWAT 모형의 유출해석결과의 비교를 수행하고 이를 통해 LSTM 모형의 적용성을 판단하였다. 관측유량 및 기온자료를 제외한 모형에서 요구되는 기초자료는 범용 입력자료를 이용하고 미래기간의 예측을 위해 편의보정 된 RCP 4.5 및 8.5 기후변화시나리오가 적용되었다. 두 모형의 Kratie 지점에 대한 미래 유출예측결과는 경향성 분석결과 두 모형 모두 시나리오 별 통계적으로 유의한 수준의 경향은 도출되지 않았으나 RCP 4.5 시나리오에 대비 RCP 8.5 시나리오에서 연평균 유량의 변동성이 크게 나타나는 것으로 분석되는 등 결과의 유사성을 보이고 있는 것으로 분석되었다. 이를 통해 LSTM 모형에 의한 유출예측결과가 단순 시계열 변화에 따른 유출변화 모의에 있어서 SWAT의 결과에 비해 높은 재현성을 보이는 것을 확인하였다. 본 연구와 같이 유출량의 시 계열 변화만을 필요로 하는 경우 적은 데이터만으로 비교적 정확한 결과를 도출하는 LSTM 모형은 매우 효과적으로 사용될 수 있다고 판단된다.