• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.6
• /
• pp.1-8
• /
• 1999

Multi-carrier CDMA is a transmission scheme where data symbols are spread in the frequency domain with a spread code then transmitted using multiple carriers. It is robust against narrowband interference because of its long symbol duration. However, due to large sidebands of the rectangular window frequency response, subchannels spectrally overlap with neighboring subchannels, which leads to substantial intercarrier interference in a dispersive channel. In this paper, we consider a mult-carrier CDMA system where subchannel spectral containment is achiveved by M-band cosine modulated filter bank (CMFB). In CMFB based MC-CDMA, subchannel spectral containment is achieved using the filter bank of longer impulse response than that of conventional discrete Fourier transform (DFT) filter bank. We show that spectral containment feature of the CMFB based fading channel is analyzed using computer simulations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.79-85
• /
• 2009

The design of a 3.2 Gb/s serial link receiver in $0.18{\mu}m$ CMOS process is presented. The major factors limiting the performance of high-speed links are transmission channel bandwidth, timing uncertainty. The design uses a multi-level signaling(4-PAM) to overcome these problems. Moreover, to increase data bit-rate and lower BER, we designed this circuit by using a current mode amplifier, Current-mode Logic(CML) sampling latches. The 4-PAM receiver achieves 3.2 Gb/s and BER is less than $1.0\;{\times}\;10^{-12}$. The $0.5\;{\times}\;0.6\;mm^2$ chip consumes 49 mA at 3.2 Gb/s from a 1.8-V supply.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.745-753
• /
• 2016

This paper presents a fully synthesizable low power interconnect bus for millimeter-scale wireless sensor nodes. A segmented ring bus topology minimizes the required chip real estate with low input/output pad count for ultra-small form factors. By avoiding the conventional open drain-based solution, the bus can be fully synthesizable. Low power is achieved by obviating a need for local oscillators in member nodes. Also, aggressive power gating allows low-power standby mode with only 53 gates powered on. An integrated wakeup scheme is compatible with a power management unit that has nW standby mode. A 3-module system including the bus is fabricated in a 180 nm process. The entire system consumes 8 nW in standby mode, and the bus achieves 17.5 pJ/bit/chip.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.265-270
• /
• 2004

This paper addresses the effect of group delay in satellite communication system. Phase of signal is distorted by the non-constant group delay. Group delay can be modeled as linear, parabolic and cubic type according to the polynomial characteristic. We investigate BER performance of satellite communication system with each 3 kinds of group delay. As signal bandwidth becomes wider, group delay makes more influence on the signal. BNR performance of satellite communication system is found when data rates are 1Mbps, 4Mbps and 8Mbps. Convolution coding with the code rate of 1/2 or 7/8 is used. At BER =10$\^$-5/, system with group delay needs more SNR of minimum 0.3㏈ to maximum 4.4㏈ than system without group delay. The worst case of BER performance happens in the linear group delay, 7/8 punctured convolution coding and 8 Mbps. The required SNR is increased by 4.4㏈ at this worst case.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.311-318
• /
• 2004

It is required to design the RF link with sufficiently stable signal margin to minimize bit errors and improve the quality of received data in the telemetry system modulated digitally like PCM/FM. In case of the vehicle flying at a high speed, the variation of the gain pattern between transmitting and receiving antenna and the fee space loss due to flight distance cause the fluctuation of link. In this paper, KSR(Korea Sounding Rocket)- III, the first domestic liquid rocket which was successfully launched in Nov. 2002 is introduced. The SNR(signal-to-noise ratio) variation of the telemetry signal which was measured at S-band ground station, the one which was simulated considering the flight trajectory, and the attitude variation such as roll, pitch and yaw are compared, analyzed, and agree very well. In addition, two virtual flying situations are simulated and evaluated-only one antenna is equipped in one case, and rocket is roll-free in the other.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.64-71
• /
• 2010

Recently, to achieve high performance of the processor, the cache is splits physically into two parts, one for instruction and one for data. This paper proposes an architecture of asynchronous instruction cache based on mixed-delay model that are DI(delay-insensitive) model for cache hit and Bundled delay model for cache miss. We synthesized the instruction cache at gate-level and constructed a test platform with 32-bit embedded processor EISC to evaluate performance. The cache communicates with the main memory and CPU using 4-phase hand-shake protocol. It has a 8-KB, 4-way set associative memory that employs Pseudo-LRU replacement algorithm. As the results, the designed cache shows 99% cache hit ratio and reduced latency to 68% tested on the platform with MI bench mark programs.

• Korean Management Science Review
• /
• v.25 no.3
• /
• pp.27-43
• /
• 2008

This study analyzes the changes of Gyeongju local society because of setting up low and intermediate level radioactive waste disposal site by using urban dynamics model. Specifically, after examining 'Gyeongju Long-Term Development Plan' announced in 2007, I establish the number of industries, population, gross local product, residents' income, and the long term employment condition as essential change-causing factors in Gyeongju local society based on the Big3 government project, and forecast it by using 'Gyeongju long-Term Development Plan' and all sorts of statistical data. In this stage, I assume 3 scenarios(basic, optimistic, and pessimistic view) to estimate the changes of local society more exquisitely, and scenarios are composed through mediation about variables of a growth rate and an inflow or outflow rate. The result shows that Gyeonaju local society would have growing changes by 2020. The essential change-causing factors are as follows. The case of population is estimated that it starts going down at the level of approximately 270 thousand by 2009, starts going up continuously after 2009, the year of completion of low and intermediate level radioactive waste disposal site, and increases from the level of about 300 thousand as minimum to 340 thousand as maximum in 2020. The estimates of other cases are made that the number of Industries has about 10 thousand increases, gross local product has almost 6 trillion increases, nominal gross national income doubles, as well as residences have approximately 280 thousand increases, and also made that employment condition also improves continuously, and diffusion ratio of house starts going up but the amount of supplies is a little bit insufficient in the long view.

• Journal of Korea Multimedia Society
• /
• v.21 no.4
• /
• pp.450-463
• /
• 2018

Sound based machine fault diagnosis is the process consisting of detecting automatically the damages that affect the machines by analyzing the sounds they produce during their operating time. The collected sounds being inevitably corrupted by random disturbance, the most important part of the diagnosis consists of discovering the hidden elements inside the data that can reveal the faulty patterns. This paper presents a novel feature extraction methodology that combines various digital signal processing and pattern recognition methods for the analysis of the sounds produced by the drills. Using the Fourier analysis, the magnitude spectrum of the sounds are extracted, converted into two-dimensional vectors and uniformly normalized in such a way that they can be represented as 8-bit grayscale images. Histogram equalization is then performed over the obtained images in order to adjust their very poor contrast. The obtained contrast enhanced images will be used as the features of our diagnosis system. Finally, principal component analysis is performed over the image features for reducing their dimensions and a nonlinear classifier is adopted to produce the final response. Unlike the conventional features, the results demonstrate that the proposed feature extraction method manages to capture the hidden health patterns of the sound.

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.394-399
• /
• 2006

In this paper, we investigated performance for 5.8GHz dedicated short range communication system using OFDM which will be applied to Intelligent transportation system services. The maximum speed of a vehicle in DSRC channel is very fast as 180km/h, so a service time is very short to serve a various traffic information if hand-off is not occurred. Therefore higher bit rate is required to proved advanced and intelligent service to the drivers of various vehicle and the data transmission rate of the next generation DSRC system if being promoted over 10Mbps. The signals received in Clarke & Gans channel have been simulated using the computer simulator.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.227-232
• /
• 2010

According to the development of ubiquitous and computer techniques, the application fields of sensor network have been enlarged. We present the design and implementation of sensor node which is the most important component of sensor network techniques in this paper. The proposed sensor node is implemented with 8-bit microprocessor, and temperature and humidity sensing device to gather temperature and humidity data in real world. It achieves low production cost and user convenience, and also has the feature os existing commercial sensor node. Though our experiments, we show that deviation of temperature and humidity are $5^{\circ}C$ and 23.2% respectively, and the proposed sensor node is reliable in real applications.