• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.91-100
• /
• 2014

This research was conducted on the conservation area of Baekdudaegan, Kangwondo under the purpose of evaluating bio-diversity according to the changes of spatial scale, using GIS data and spatial filtering method. The diversity index was calculated based on the information of species of The $5^{th}$ forest type map using Shannon-weaver index (H'), evenness index ($E_i$) and richness index ($R_i$). The diversity index was analyzed and compared according to the changes of 12 spatial scales from Kernel size $3{\times}3$ to $73{\times}73$ and basin unit. As for H' and $R_i$, spatial scale increased as diversity index decreased, while $E_i$ decreases gradually. H' and $R_i$ was highest; each 1.1 and 0.6, when the Kernel size was $73{\times}73$, while $E_i$ was 0.2, the lowest. When you look at according to the basin unit, for large basin unit, 'YeongDong' region shows higher diversity index than 'YeongSeo' region. For middle basin unit, 'Gangneung Namdaecheon' region, and for small basin unit, 'Gangneung Namdaecheon' and 'Gangneung Ohbongdaem' region shows high diversity index. When you look at the relationship between diversity index and Geographic factors, H' shows positive relation to curvature and sunshine factor while shows negative to elevation, slope, hillshade, and wetness index. Also $E_i$ was similar to the relationship between H' and Geographic factor. Meanwhile, $R_i$ shows positive relationship to curvature and sunshine factor, while negative to elevation, slope, hillshade, and wetness index. macro unit diversity index evaluation was possible through the GIS data and spatial filtering, and it can be a good source for local biosphere conservation policy making.

• Tunnel and Underground Space
• /
• v.11 no.2
• /
• pp.132-145
• /
• 2001

The purpose and need of the study is to quantify the advantage or disadvantage of the environmental friendliness of the partitioning of nuclear fuel cycle. To this end, a preliminary study on the quantitative effect of the partition on the permanent disposal of spent PWR and CANDU fuel (HLW) was carried out. Before any analysis, the so-called reference radionuclide release scenario from a potential repository embedded into a crystalline rock was developed. Firstly, the feature, event and processes (FEPs) which lead to the release of nuclides from waste disposed of in a repository and the transport to and through the biosphere were identified. Based on the selected FEPs, the ‘Well Scenario’which might be the worst case scenario was set up. For the given scenario, annual individual doses to a local resident exposed to radioactive hazard were estimated and compared to that from direct disposal. Even though partitioning and transmutation could be an ideal solution to reduce the inventory which eventually decreases the release time as well as the peaks in the annual dose and also minimize the repository area through the proper handling of nuclides, it should overcome major disadvantages such as echnical issues on the partitioning and transmutation system, cost, and public acceptance, and environment friendly issues. In this regard, some relevant issues are also discussed to show the direction for further studies.

• Journal of Environmental Science International
• /
• v.23 no.1
• /
• pp.113-128
• /
• 2014

Jeju Special Self-Governing Province has the natural assets resulting in UNESCO World Biosphere Reserve, World Heritage Listed and World Geopark Certification, so the principle of 'Conservation First Development Later' has been set up for the vision of environmental policy to preserve these assets. This case study has been carried out to investigate the realization of the principle of 'Conservation First Development Later' for the development projects performed environmental impact assessment from 1994 to 2012 in Jeju Province, using geographic information systems(GIS). The Jeju Province has its own ordinance to consult and operate an environmental impact assessment(EIA) system. In particular, the conservation area, such as, Absolute/Relative Conservation Area and Underground Water, Ecosystem and View Conservation Zone, has been assigned and managed specially to conserve the natural environment. The 179 projects has been performed EIA for last 18 years in Jeju Province, and then the Absolute Conservation Area has been included in 22 projects and the Relative Conservation Area has been included in 34 projects. However, the 2 projects only have included the Absolute Conservation Area for 7 years after 2005. This result suggests that the application of the principle for the Absolute Conservation Area is strengthened gradually. On the other hand, the 17 projects and the 24 projects have included the Underground Water Conservation Zone assigned grade 1 and 2, respectively, and the number has been increasing after 2004. The results show that it needs to strengthen the application of the principle for this Zone. And the Ecosystem Conservation Zone assigned grade 1 and 2 have been included in 1 project and 9 projects, respectively. It is considered from this result that the principle is realized successfully for the Ecosystem Conservation Zone. In addition, it could be known that the principle is applied well for the View Conservation Zone, in this study.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.1 no.1
• /
• pp.99-108
• /
• 1998

In order to represent the surface characteristics in local meteorological model, soil type, vegetation index, surface roughness length, surface albedo and leaf area index should be prescribed on the surface process parameterization. In this study, the $1^{\circ}/1^{\circ}leaf$ area index, surface roughness length, and snow free surface albedo and fine mesh NDVI with seasonal variation derived from the satellite observation were applied to the land surface process parameterization. From comparison between with and without satellite data in the interactions between biosphere and atmosphere, land and atmosphere, the sensitivity of the simulated heat, energy and water vapor fluxes, ground temperature, wind, canopy water content, specific humidity, and precipitation fields were investigated.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.1
• /
• pp.5-14
• /
• 2008

The deep subseafloor rock in oil reservoirs represents a unique environment in which a high oil contamination and a very low biomass can be observed. Sampling this environment has been a challenge owing to the techniques used for drilling and coring. In this study, the facilities developed by the Brazilian oil company PETROBRAS for accessing deep subsurface oil reservoirs were used to obtain rock samples at 2,822-2,828 m below the ocean floor surface from a virgin field located in the Atlantic Ocean, Rio de Janeiro. To address the bacterial diversity of these rock samples, PCR amplicons were obtained using the DNA from four core sections and universal primers for 16S rRNA and for APS reductase (aps) genes. Clone libraries were generated from these PCR fragments and 87 clones were sequenced. The phylogenetic analyses of the 16S rDNA clone libraries showed a wide distribution of types in the domain bacteria in the four core samples, and the majority of the clones were identified as belonging to Betaproteobacteria. The sulfate-reducing bacteria community could only be amplified by PCR in one sample, and all clones were identified as belonging to Gammaproteobacteria. For the first time, the bacterial community was assessed in such a deep subsurface environment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.372-385
• /
• 2014

Lignin is an abundant natural polymer in the biosphere and second only to cellulose; however, it is under-utilized and considered a waste. In this study, lignin was fabricated into nanofibers via electrospinning. The critical parameters that affected the electrospinnability and morphology of the resulting fibers were examined with the aim to utilize lignin as a resource for a new textile material. Poly(vinyl alcohol) (PVA) was added as a carrier polymer to facilitate the fiber formation of lignin, and the electrospun fibers were deposited on polyester (PET) nonwoven substrate. Eleven lignin/PVA hybrid solutions with a different lignin to PVA mass ratio were prepared and then electrospun to find an optimum concentration. Lignin nano-fibers were electrospun under a variety of conditions such as various feed rates, needle gauges, electric voltage, and tip-to-collector distances in order to find an optimum spinning condition. We found that the optimum concentration for electrospinning was a 5wt% PVA precursor solution upon the addition of lignin with the mass ratio of PVA:lignin=1:5.6. The viscosity of the lignin/PVA hybrid solution was determined as an important parameter that affected the electrospinning process; in addition, the interrelation between the viscosity of hybrid solution and the electrospinnability was examined. The solution viscosity increased with lignin loading, but exhibited a shear thinning behavior beyond a certain concentration that resulted in needle clogging. A steep increase in viscosity was also noted when the electrospun system started to form fibers. Consequently, the viscosity range to produce bead-free lignin nanofibers was revealed. The energy dispersive X-ray analysis confirmed that lignin remained after being transformed into nanofibers. The results indicate the possibility of developing a new fiber material that utilizes biomass with resulting fibers that can be applied to various applications such as filtration to wound dressing.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.2
• /
• pp.80-87
• /
• 1998

Since groundwater flow paths have one of the major roles to transport the radioactive nuclides from the radioactive waste repository to the biosphere, the discrete fracture network model is used for the rock block scale flow instead of the porous continuum model. This study aims to construct a three dimensional discrete fracture network to interpret the groundwater flow system in the study site. The modeling work includes the determination of the probabilistic distribution function from the fracture geometric and hydraulic parameters, three dimensional fracture modeling and model calibration. The results of the constant pressure tests performed in a fixed interval length at boreholes indicate that the flow dimension around boreholes shows mainly radial to spherical flow pattern. The fracture transmissivity value calculated by Cubic law is 6.12${\times}$10$\^$-7/ ㎡/sec with lognormal distribution. The conductive fracture intensity estimated by FracMan code is 1.73. Based on this intensity, the total number of conductive fractures are obtained as 3,080 in the rock block of 100 m${\times}$100 m${\times}$100 m.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.263-272
• /
• 2012

A GoldSim template program for a safety assessment of a hybrid-typed repository system, called A-KRS, in which two kinds of pyro-processed radioactive wastes, low-level metal wastes and ceramic high-level wastes that arise from the pyro-processing of PWR nuclear spent fuels are disposed of, has been developed. This program is ready both for a deterministic and probabilistic total system performance assessment which is able to evaluate nuclide release from the repository and farther transport into the geosphere and biosphere under various normal, disruptive natural and manmade events, and scenarios. The A-KRS has been probabilistically assessed with 9 selected input parameters, each of which has its own statistical distribution for a normal release and transport scenario associated with nuclide release and transport in and around the repository. Probabilistic dose exposure rates to the farming exposure group have been evaluated. A sensitivity of 9 selected parameters to the result has also been investigated to see which parameter is more sensitive and important to the exposure rates.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.20-25
• /
• 1998

Solar irradiation controls the exchange of heat energy between atmosphere and land or ocean, and becomes an important factors to the radiance flux at the surface and the biosphere. In order to estimate solar irradiance and earth albedo In Korea peninsula during 1996, GMS date and paramaterization model was combinationally used. In clear sky, the paramaterization model was used to estimate solar iradiance. Also in cloudy sky, the earth albedo was used to calculate the Interceptive effect of solar irradiance. The hourly solar irradiance [the hourly earth albedo] showed generally very low values with <1.00 MJ/m$^2$hr [high values with >0.65] on the middle part (36.00-36.50$^{\circ}$S) and the Southeastern part (near 34.50$^{\circ}$S) in Korea peninsula, respectively. Satellite estimates (GMS data) with pyramometer measurements (in-situ data) were compared for 21 observed stations. Totally, correlation coefficient showed high values with 0.85. In the monthly variation, correlation coefficient of the spring and summer with rms=about 0.42 MJ/m$^2$hr was better than the autumn and winter with rms >0.5 MJ/m$^2$hr. Generally monthly variations of correlation coefficient between satellite estimetes and pyranometer measurements showed r=0.936 in clear sky during 1 year except only May, June, July and August.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.329-346
• /
• 2008

Post-closure safety assessment for the Wolsong Low- and Intermediate-level radioactive waste Disposal Center is described. Based on assessment context, closure concept and ground water flow characteristics of the disposal site, brief descriptions are included on the assessment scenarios, models, input parameters and tools. Radionuclide transport modeling in the near-field and far-field, gas generation and transport modeling, human intrusion and biosphere transport are also described briefly. Assessment results for each scenarios are shown to meet the performance criteria of regulatory body. Further and continuous efforts to improve the safety of disposal facility will be made during the construction and operational period.