• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.1
• /
• pp.132-138
• /
• 2020

Marphysa sanguinea is the most well-known polychaete species with a high economic value. However, this species has a high mortality in the early rearing stage of aquaculture. This study was conducted to find out the optimal substrate size and organic contents for the growth and survival rate of M. sanguinea larvae and juveniles. It was observed that the smaller grain size (<Ø 0.063 mm) and high organic contents (5-10%) induced settlement and reduced settlement time of larvae. Moreover, the growth and survival rate of larvae reached high levels at Ø 0.004-0.016 mm of grain sizes and 5-7.5% of organic contents as advantageous substrates for settlement. The survival rate of juveniles reached over 90% in less than Ø 0.016 mm substrate on 15-day experiment for different grain sizes of substrates. These results indicated that substrate compositions of less than Ø 0.016 mm of sand size and 5-7.5% of organic contents in mud will enhance the productivity of M. sanguinea at the early stage.

• Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.303-310
• /
• 2011

We characterized a cytoplasmic actin gene locus in greenling Hexagrammos otakii (Scorpaeniformes). Genomic clones isolated from the greenling DNA library contained two homologous cytoplasmic actin gene copies (HObact2.1 and HObact2.2) in a tail-to-head orientation. Their gene structure is characterized by six translated exons and one non-translated exon. Exon-intron organization and the nucleotide sequences of the two actin gene isoforms are very similar. However, only the HObact2.1 isoform contains microsatellite-like, dinucleotide repeats in the 5'-flanking region (named HOms2002) and intron 1 following the non-translated exon 1 (named HOms769). One microsatellite locus (HOms769) was highly polymorphic while the other (HOms2002) was not. Based on bioinformatic analysis, different transcription factor binding motifs are related to stress and immune responses in the two actin isoforms. Semiquantitative and real-time reverse transcription-PCR assays showed that both isoform transcripts were detectable ubiquitously in all the tissues examined. However, the basal expression levels of each isoform varied across tissues. Overall, the two isoforms showed a similar, but not identical, expression pattern. Our data suggest that the cytoplasmic actin genes may be the result of a recent duplication event in the greenling genome, which has not experienced significant subfunctionalization in their housekeeping roles.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.5
• /
• pp.801-806
• /
• 2002

A multiplex competitive polymerase chain reaction (PCR) method was developed for the rapid identification and quantification of Leuconostoc mesnteroides and Lactobacillus plantarum populations which are the key microorganisms in kimchi fermentation. The strain-specific primers were designed to selectively amplify the target genes encoding 165 rRNA of L. plantarum and dextransucrase of L. mesenteroides. There was a linear relationship between the band intensity of PCR products and the number of colony forming units of each model organism. The PCR quantification method was compared with a traditional plate-counting method f3r the enumeration of the two lactic acid bacteria in a mixed suspension culture and also applied to a real food system, namely, watery kimchi. The population dynamics of the two model organisms in the mixed culture were reliably predictable by the competitive PCR analysis.

• Fisheries and Aquatic Sciences
• /
• v.16 no.4
• /
• pp.291-301
• /
• 2013

The genomic organization, tissue distribution, and developmental expression of two paralogous GAPDH isoforms were characterized in the mud loach Misgurnus mizolepis (Cypriniformes). The mud loach gapdh isoform genes (mlgapdh-1 and mlgapdh-2) had different exon-intron organizations: 12 exons in mlgapdh-1 (spanning to 4.88 kb) and 11 in mlgapdh-2 (11.78 kb), including a non-translated exon 1 in each isoform. Southern blot hybridization suggested that the mud loach might possess the two copies of mlgapdh-1 and a single copy of mlgapdh-2. The mlgapdh-1 transcript levels are high in tissues requiring high energy flow, such as skeletal muscle and heart, whereas mlgapdh-2 is expressed abundantly in the brain. Both isoforms are differentially regulated during embryonic and larval development, during which their expression is upregulated with the progress of development. Lipopolysaccharide challenge preferentially induced mlgapdh-2 transcripts in the liver. Therefore, the two isoforms have diversified functionally; mlgapdh-1 is associated more closely with energy metabolism, while mlgapdh-2 is related more to stress/immune responses, in the mud loach.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.27-33
• /
• 2013

Manufacturing fabrics from dissolving cellulosic pulp is increasing in these days. For making high quality of cellulose-based fabrics, control of cellulose DP (degree of polymerization), its alpha cellulose content, its brightness, and its crystallinity are important. To process the cellulosic raw material, refining of cellulosic fibers is essential, and it is important to know if refining affects those important cellulose properties. The effects of PFI mill and Valley beater refining on the alpha-cellulose content, cellulose DP, crystallinity, and paper mechanical properties of wood and two different cotton fibers were studied. The results showed that PFI mill refining rarely affected those properties. Fibers refined by a Valley beater displayed a small reduction in fiber length in comparison with those refined by a PFI mill. However, the Valley beater refining method produced almost no changes in cellulose properties, either. The refining process seemed to have very little effect on the cellulose DP, crystallinity index, or alpha-cellulose content until the freeness decreased to around 300 mL CSF for wood and 100 mL CSF for cotton fibers, respectively. There were also no differences in tensile strength development in two refining methods.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.5
• /
• pp.399-404
• /
• 2010

A new green home designed to save money while at the same time saving the environment with some of the finest green features available in the market. Composite column composed of structural steel and structural glued laminated timber is avery Eco-friendly building products for design building because that use recycled or second hand. For compare to compressive strength of structural glued laminated timber (glulam), structural steel, and composite column (steel-glulam), tested compressive strength of each specimen. 1) structural glued laminated timber : Theoretical compressive strength is 151.6 kN similar to elastic limits. 2) structural steel (H type) : Theoretical compressive strength is 148.2 kN little under the elastic limits. 3) structural steel (D type) : Theoretical compressive strength is 147.3 kN upper than the elastic limits. 4) composite column : Actual elastic limits are about 600 kN. Result in, composite column improve compressive strength of Structural steel column and provide structural stability of the building.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.66-71
• /
• 2011

Biocomposites were fabricated with biodegradable polymers and natural fibers. Biocomposites have benefits of low cost, low density, and biodegradability over inorganic fiber composite, and give comparable strength properties. Hydrophobic polymer used for sizing in paper industry, AKD (Akenyl Keten Dimer), was applied to natural fibers, red algae fibers (RAF) in this study, to make fiber surfaces more compatible to hydrophobic nature of matrix polymers. Composites with RAF, kenaf, glass fibers, and carbon fibers have been fabricated by a compression molding method and their thermo-mechanical properties have been studied. Also, the thermal dimensional stability test was done from at 30 to $100^{\circ}C$. The storage moduli and the thermo-mechanical stabilities of polypropylene and poly lactic acid based biocomposites were improved by reinforcing with the RAF and much more with AKD treated fibers. Dimensional stability of biocomposite was also markedly improved by AKD pretrement on RAF.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.537-544
• /
• 2003

The objectives of this study were to investigate the failure characteristics of a total of 90 parts of tractor driveline, and to predict their average annual demands required to perform the after-sales service. The failure characteristics such as failure mode, mean time between failures, characteristic life and reliability were analyzed using the data collected through the experienced mechanics at the part centers of the tractor manufacturers. The analysis was based on the assumption that the failure distribution follows the Weibull distribution. The average annual demands were also predicted for the replacement parts using the mean time between failures and the renewal theory based on the Weibull distribution. The results of the study revealed that the driveline parts failure was mostly from wearout and their average characteristic life is about 1.760 hours. The estimated mean time between failures was in a range of 670∼3,740 hours and reliability in a range of 40∼60％. The annual replacement demands were in a range of 4∼45 for a service of 100 tractors.

• Journal of Biosystems Engineering
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2001

Interactions between cage wheel and soil under the wet paddy field condition were analyzed. The cage wheel as a traction aid to driving tires of tractor was attached to the outside of the tires. The driving torque transmitted only to the cage wheel was measured and its effect on the total driving torque by both the tires and cage wheel was analyzed. Mathematical models were developed to predict the soil thrusts y a single lug and by the cage wheel with many lugs, respectively. Experimental results showed that as the diameter of cage wheel increased, positive effects of the cage wheel on the traction also increased. About 33-40% of the total traction force was obtained by the cage wheel with a diameter 1,182mm and 49-55% with a diameter 1,222mm. The peak thrust of the single lug of cage wheel increased by 31% and 59%, respectively when the diameter of the cage wheel increased from 1,182mm to 1,222mm and 1,262mm. The thrust by the cage wheel was estimated by using the developed mathematical models and the results were proved that the models are reliable for the estimation of the traction by the cage wheels.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.1
• /
• pp.52-55
• /
• 2002

Flow cytometric techniques were used to investigate cell size, protein content and cell cycle behavior of recombinant Saccharomyces cerevisiae strains producing human lysozyme (HLZ). Two different signal sequences, the native yeast $MF\alpha1$ signal sequence and the rat $\alpha-amylase$ signal sequence, were used for secretion of HLZ. The strain containing the rat $\alpha-amylase$ signal sequence showed a higher level of internal lysozyme and lower specific growth rates. Flow cytometric analysis of the total protein content and cell size showed the strain harboring the native yeast signal sequence had a higher total protein content than the strain containing the rat $\alpha-amylase$ signal sequence. Cell cycle analysis indicated that the two lysozyme producing recombinant strains had an increased number of cells in the $G_2+M$ phase of the yeast cell cycle compared with the host strain SEY2102.