• Journal of the Korean Ceramic Society
• /
• v.22 no.4
• /
• pp.21-25
• /
• 1985

For studying the influence of addition of Polyvinyl alcohol (PVA)-montmorillonite complex on the hydration of Portland cement the PVA-montmorillonite derivatives were prepared in advance an characterized system-of Portland cement the PVA-montmorillonite derivatives were prepared in advance and characterized systema-tically. PVA with the polymerizationdegree ranging from 500 to 2000 have been intercalated into the lamellar structure of hydrated montmorillonites which were fractionated under 2㎛ by Stock's rule. In all cases the constant basal spacing of ∼20Å was determined whatever the molecular weight of PVA used. And the carbon chain orientation of PVA in the interfoliar space has been deduced to be parallel with bilayer structure.

• 대한치주과학회:학술대회논문집
• /
• 2001.12a
• /
• pp.81-82
• /
• 2001

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1006-1009
• /
• 2006

The chemical structure of the interface between Ag with $Li_2O$ and tri (8-hydroxyquinoline) aluminum (Alq) was investigated by using in-situ characterization of x-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). $Li_2O$ on Ag had lower barrier height than LiF on Ag. XPS and UPS results show the interaction between $Li_2O$ and Alq leads to gap state formation in HOMO of Alq.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.581-584
• /
• 2003

Most modeling about dynamic behavior of Antiferroelectric Liquid Crystal (AFLC) is limited to the hysteric characteristics of AFLC cells or thresholdless switching of frustrated AFLC cells. In this paper, domain growth of AFLC cells is modeled with extended bilayer model. When driving pulses that consist of a selection voltage, a bias voltage, and a reset voltage are applied to the AFLC cell, its dynamic behavior is simulated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.211-214
• /
• 2003

The tribological properties of amphiphilic monolayers and composite multilayer on silicon surface were investigated using micro-tribometer and Auger Electron Spectroscopy. Langmuir-Blodgett (LB) monolayers from behenic acid. 2.4-heneicosanedione(HD) and its copper complex((HD)$_2$Cu) were fabricated on silicon surface and the composite multilayer of 5-bilayer of (HD)$_2$Cu was fabricated on the surface of octadecyltrichlorsilane (OTS) self-assembled monolayer(SAM). We observed that LB monolayers and the composite multilayer exhibited a steady and excellent friction response when compared with the OTS SAM. These LB mono and multilayer also showed much higher wear-resistance than the OTS SAM.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.11a
• /
• pp.81-90
• /
• 1994

리포좀은 1960년대 초 Bangham등에 의해 혈액응고시 인지질의 영향에 관한 연구 중 우연히 발견하게 되었다. 즉 인지질이 물에 분산되어 2 분자막 (Bilayer)을 형성함을 알았고, 이때 생긴 폐쇄소포체를 리포좀이라 하였다. 이러한 리포좀은 원형질 막이나 세포내의 소기관의 막과 유사한 구조를 갖고 있기 때문에 이것을 이용하여 생화학자나 생물리학자들은 생체막의 모델시스템으로 이용하여 생체막의 기능 연구에 널리 이용하여 왔다. 1970년 초반부터 리포좀을 이용한 약물의 생체내 공급(Drug Delivery System, DDS)에 대하여 많은 연구가 이루어져 왔고, 지금까지도 의약품외 전달매체로 이용할려고 많은 시도를 하고 있는 실정이다. 최근에는 리포좀을 이용하여 항원을 전달하는 면역보조제(Adjuvant System)로 이용하려는 시도를 하고 있다. 현재까지 리포좀을 이용한 상품들은 화장품과 임상용 진단시 약, DNA transfection system (Lipopectin)으로 활용되고 있다.

• Journal of Photoscience
• /
• v.7 no.1
• /
• pp.9-13
• /
• 2000

An alternately assembled polycation-anionic dye film was prepared on a precursor assembly of poly(allylamine)hydrochloride (PAH) and poly(sodium styrenesulfonate) (PSS) or of poly (djallyldimethyl)ammonium chloride (PDDA) and PSS. The (PAH/PSS) precursor assembly gave better adsorptivity to the anionic dye than the (PDDA/PSS) one. Four kinds of anionic dyes (EB-T, AR-17 AR-18, AR-27) with different numbers of sulfonate substituents were compared. The extent of dye assembling was higher for the dye with a smaller number of sufonate substituents. Second harmonic generation (SHG) was clearly observed from the films. The SHG signal and the absorption intensity correlated well up to four polycation/dye bilayers, while further assembly did not increase the SHG signal appreciably. Second order nonlinear coefficients for ten bilayer assemblies were the order of pm/V.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.1
• /
• pp.33-36
• /
• 2016

Suppression of the superconducting transition temperature ($T_c$) of NbN thin films in superconductor/ferromagnet multilayers has been investigated. Both superconducting NbN and ferromagnetic FeN layers were deposited on thermally oxidized Si substrate at room temperature by using reactive magnetron sputtering in an $Ar-N_2$ gas mixture. The thickness of FeN films was fixed at 20 nm, while the thickness of NbN films was varied from 3 nm to 90 nm. $T_c$ suppression was clearly observed in NbN layers up to 70 nm thickness when NbN layer was in proximity with FeN layer. For a given thickness of NbN layer, the magnitude of $T_c$ suppression was increased in the order of Si/FeN/NbN, Si/NbN/FeN, and Si/FeN/NbN/FeN structure. This result can be used to design a spin switch whose operation is based on the proximity effect between superconducting and ferromagnetic layers.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.324-326
• /
• 1997

Low power ZnO-Si gas sensor below 500 mW at operating temperature has been fabricated by using micromachining technique. I-V measurement shows the power consumption of 260 mW at $400^{\circ}C$ The sensitivity of the sensor was 45 percent at operating temperature of $350^{\circ}C$(230 mW) with 1,000 ppm CO gas atmosphere. The response and the recovery time found out to be 94 sec and 180 sec, respectively, when CO gas was used. In order to measure the exact temperature of the gas sensing layer, Pt/Cr bilayer-RTD was used in this experiment.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.148-153
• /
• 2009

Few methods have dealt with segmenting multiple images with analogous content. Concurrent images of a scene and gathered images of a similar foreground are examples of these images, which we term consistent scene images. In this paper, we present a method to segment these images based on manual segmentation of one image, by iteratively propagating information via multi-level cues with adaptive confidence. The cues are classified as low-, mid-, and high- levels based on whether they pertain to pixels, patches, and shapes. Propagated cues are used to compute potentials in an MRF framework, and segmentation is done by energy minimization. Through this process, the proposed method attempts to maximize the amount of extracted information and maximize the consistency of segmentation. We demonstrate the effectiveness of the proposed method on several sets of consistent scene images and provide a comparison with results based only on mid-level cues [1].