• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.1-6
• /
• 2012

The accurate information of mass properties is required for the precise control of the spacecraft. The mass properties, mass and inertia, are changeable by some reasons such as consumption of propellant, deployment of solar panel, sloshing, environmental effect, etc. The gyro-based attitude data including noise and bias reduces the control accuracy so it needs to be compensated for improvement. This paper introduces a real-time inertia estimation method for the attitude determination of STSAT-3, Korea Science Technology Satellite. In this method we first filter the gyro noise with the Extended Kalman Filter(EKF), and then estimate the moment of inertia by using the filtered data from the EKF based on the Recursive Least Square(RLS).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1599-1607
• /
• 2002

The purpose of this work is to suggest a new non-contact damage detection method for rotating ferromagnetic shafts. The presence and the location of a damage in rotating shafts are assessed by means of longitudinal elastic waves propagating along the shafts. These waves are measured by non-contact magnetostrictive sensors consisting of a coil and bias magnets. This paper shows the effectiveness of the sensors in the damage detection of rotating shafts. Several issues occurring in the application of the sensors to rotating shafts are carefully investigated.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.919-929
• /
• 1997

Induction motors are used in many areas to transform electrical energy to mechanical energy. In the design of an induction motor, not only energy efficiency but also noise becomes an important factor. To effectively address the noise problem, it will be convenient if one can see where and how noise is generated and propagated. In this study sound radiation by an induction motor is visualized using cylindrical acoustic holography. To minimize the bias error by window effect Minimum Error Window(MEW) is used. Its performance is verified by numerical simulations. Based on these theoretical understanding, sound pressure measurement with an induction motor are performed. Not only sound radiation are visualized but sound pressure level and sound power level are also estimated. Results show that the main source is located at nearly bottom part of the motor and the total sound pressure level is 49dB, which satisfies the guideline value suggested by the KS C 4202.

• East Asian Economic Review
• /
• v.16 no.3
• /
• pp.249-272
• /
• 2012

This paper examines how a Korean automobile firm price-discriminates between the Korean and the U.S. markets. We argue that a Korean automobile firm's pricing behavior depends on the differences in price elasticity over the segmented markets between the countries. Our findings are that differences in price elasticity may help explain why a medium-class car's price is higher in Korea than that in the U.S. while a small-sized car's price is higher in the U.S. than in Korea, which implies that a Korean automobile firm $3^{rd}$ degree price-discriminates on the same or similar products between Korea and the U.S. This type of $3^{rd}$ degree price discrimination differs from a typical home-bias effect (charging higher prices to domestic consumers) because a small-sized car which is produced domestically sells at higher price abroad. This finding can be added as a source that violates the law of one price.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.1
• /
• pp.111-124
• /
• 1999

This evapaper is toluate the forecasting performance of three neural network(NN) approaches against ARIMA model using the famous time series analysis competition data. The first NN approach is to analyze the second Makridakis (M2) Competition Data using Multilayer Perceptron (MLP) that has been the most popular NN model in time series analysis. Since it is recently known that MLP suffers from bias/variance dilemma, two approaches are suggested in this study. The second approach adopts Cascade Correlation Network (CCN) that was suggested by Fahlman & Lebiere as an alternative to MLP. In the third approach, a time series is separated into two series using Noise Filtering Network (NFN) that utilizes autoassociative memory function of neural network. The forecasts in the decomposition analysis are the sum of two prediction values obtained from modeling each decomposed series, respectively. Among the three NN approaches, Decomposition Analysis shows the best forecasting performance on the M2 Competition Data, and is expected to be a promising tool in analyzing socio-economic time series data because it reduces the effect of noise or outliers that is an impediment to modeling the time series generating process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.6
• /
• pp.503-508
• /
• 2008

In order to reduce the piezoelectric field originated from the well layer which resides in InGaN/GaN light emitting diode, InGaN/GaN superlattice buffer layers were grown at the bottom and the top of the active layer. Measuring the photoluminescence spectra with different reverse bias voltages clearly revealed the condition of the flat band under which the transition energy is maximized and the linewidth is minimized. Accordingly, the piezoelectric field of $In_{0.15}Ga_{0.85}N$ in our sample was estimated as -1.08 MV/cm. It is less than half the value reported in the previous studies, and it is evidenced that the strain has reduced due to the superlattice buffer layers.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1281_1282
• /
• 2009

ICP-CVD를 이용하여 inverted staggered 구조를 갖는 미세결정 실리콘 (Nanocrystalline Silicon, nc-Si) 박막 트랜지스터(Thin Film Transistor, TFT)를 제작하였다. 또한, 소자의 특성과 전기적 안정성을 평가하였다. 실험 결과는 짧은 채널 길이를 갖는 nc-Si TFT가 긴 채널 길이의 소자보다 같은 드레인 전압 바이어스 하에서 덜 열화 됨을 알 수 있었다. 이는 드레인 전압 바이어스 하에서의 낮은 채널 캐리어 농도는 적은 defect state를 만들기 때문으로 짧은 채널 길이의 TFT가 긴 채널 길이의 TFT보다 $V_{TH}$ 열화가 적었다. 이러한 결과는 짧은 채널 길이의 nc-Si TFT가 디스플레이 분야에 있어 다양하게 응용될 것으로 기대된다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.210-214
• /
• 2007

Silicon nanoparticles are widely studied as a material with great potential for wide applications. For application to present industry, it should be easy to control the characteristics of nanoparticle including the size and structure. In this paper, we investigated the formation of Si nanoparticle using pulse plasma technology. Plasma technology is already quite common in device industry and the size of nanoparticle can be easily controlled according to plasma pulse duration. An inductively-coupled plasma chamber with RF power (13.56 MHz) was used with DC-biased grid $(-200\sim+200\;V)$ installed above the substrate. In order to measure the shape and size of nanoparticle, TEM was used. It was found that the size of nanoparticles can be controlled well with the plasma pulse duration and the collection efficiency is increased with the use of either negative or positive DC-bias.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.585-589
• /
• 2012

The characteristics of interface layer and the effect of mole fraction of inlet gas mixture($B_2H_6/H_2/N_2/TiCl_4$) on the microstructure of Ti(B,N) films were studied by microwave plasma hot filament CVD process. Ti(B,N) films were deposited on a substrate(STD-61) to develop a high performance of resistance wear coating tool. Ti(B,N) films were obtained at a gas pressure of 1 torr, bias voltage of 300 V and substrate temperature of $480^{\circ}C$ in $B_2H_6/H_2/N_2/TiCl_4$gas system. It was found that TiN, $TiB_2$, TiB and hexagonal boron nitride(h-BN) phases exist in thin layer on the STD-61.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.154-164
• /
• 1994

The secular period behavior of 23 field RR Lyrae stars is studied in order to determine if the observed period changes could be attributed, at least in the mean, to stellar evolution. The sample of stars is subdivided into two Oosterhoff groups based on the metallicity and period-shift. Despite the small sample size, we found a distinct bias toward positive period changes in the group II variables. The period changes of the group I variables, however, are small and in the mean near zero. This is consistent with the behavior predicted by the recent evolutionary models, as was the case for the variables in globular clusters. This provides yet another support for the Lee, Demarque, and Zinn (1990) evolutionary models of RR Lyrase stars and their explanation of the Sandage period-shift effect.