• Food Science and Preservation
• /
• v.20 no.5
• /
• pp.720-726
• /
• 2013

This study was carried out to optimize the filtration, clarification, anti-browning processing conditions of clear pear juice and to investigate changes in antioxidant activity of pear juice produced through different heating treatment. For the filtration with cheese cloth, filter paper, or centrifugation (10 min at 3,000 rpm), the pear juice was most efficiently filtered with centrifugation because it showed the highest lightness (L value) and lowest yellowness (a value). Among various clarifying agents, 1% of gelatin or bentonite clarified effectively pear juice but tannin or egg albumin did not. Among anti-browning agents (0.1%) like L-ascorbic acid, NaCl or citric acid, L-ascorbic acid prevented the browning of pear juice with the lowest browning index value (2.62), compared to that of NaCl (2.74), or citric acid (2.87). Fructose, sucrose, glucose and sorbitol were present in the pear juice, the fructose and glucose contents increased but that of sucrose decreased in the heated pear juice. The total polyphenol content of the heated pear juice significantly increase, and did the total flavonoid contents in the clear and heated pear juice. The DPPH radical scavenging activity and nitrate scavenging activity were higher in the clear and heated pear juice than in the fruit crush.

• Korean Journal of Weed Science
• /
• v.7 no.2
• /
• pp.165-170
• /
• 1987

This study was undertaken to elucidate the behavior of herbicide bensulfuron-methyl[methyl-2-[[[[[(4,6-dimethoxy pyrimidine-2yl)amino]carbonyl]amino]sulfonyl]methyl]benzoate]in soils. Adsorption of the herbicide in soils was mainly correlated with content of organic matter and clay, and canon exchange capacity. Adsorption distribution coefficient(Kd value) in clay loam soil was greater than those in loam and sandy loam soils. The Kd value decreased in the order of zeolite, bentonite, halloysite and laziolite clay minerals. Bensulfuron-methyl moved to 3cm deep in clay loam soil and 4cm deep in sandy loam and herbicide treated layer was 0 to 2cm profile in the two soils. The decomposition rate of bensulfuron methyl varied with the soil properties. The rate was slower in sterilized soil than in nonsterilized. Addition of organic matters to the soils accelerated the decomposotion. The degradation was more rapid in 30$^{\circ}C$ soil temperature than in 20$^{\circ}C$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.405-411
• /
• 2007

This study was carried out to measure insoluble phosphorus fractions content fixed in different soil type and isolate a superior phosphate solublizing bacteria(PSB) producing free phosphate in citrus orchard soil. Distribution of insoluble phosphate fraction ordered Al-P>Ca-P>Fe-P in the investigated citrus orchards. Insoluble phosphate fraction such as Al-P, Ca-P, Fe-P were higher in volcanic ash than in non-volcanic ash soil. A PSB with high holo zone in PDA-P medium isolated from citrus orchard soil. This strain identificated by MIDI system as Bacillus sphaericus. The optimum growth of pH and temperature were at 4~5, $30^{\circ}C$, respectively. When Bacillus sphaericus cultured at $25^{\circ}C$, 150 rpm condition in LB broth medium included different phosphate. Bacillus sphaericus produced free phosphate in the culture broth medium from tricalcium-phosphate(207.0 ppm), aluminium phosphate(324.5 ppm) and hydroxyapatite(334.8 ppm) and Phosphatase activity of Bacillus sphaericus was higher at $35^{\circ}C$ culture condition than that of $25^{\circ}C$. Two type preparation inoculated Bacillus sphaericus made with carrier materials such as Bentonite, $CaCO_3$, Sodium alginate. Density of PSB in this preparation conserved at $10^5c.f.u.\;g^{-1}$ level during storage in different temperature condition for 7 month. It also showed that free phosphate produced at PDA-P medium.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.9
• /
• pp.55-60
• /
• 2010

This study are carried out to an lab model tests to develop a construction method that solidifies high-water content cohesive soil by using filter type drain and vacuum pressure, and that stabilizes the ground by accelerating horizontal drain at incline or in tunnel. The calibration chamber was designed within length of 1.5m and height of 50cm, and a drainage hole for preconsolidation, a switchgear and a piezometer were installed at the bottom part of the chamber. Also, a settlement gage was installed at the top part so that it can measure the settlement by time. The calibration ground basis was made in a form of thin layer from kaolinite and bentonite in 9:1 ratio stirred at 130% water content condition. A filter type drain was installed at chamber center and a vacuum pressure of 0.8MPa was applied through a hose linked to the cap at the top part, then, the settlement was measured in every 1 hour interval. After experiment, the moisture contents were measured by position, then, verified the increase of solidity of the ground through a triaxial compression test on undisturbed profile. After 11 days from the effective date, it was observed that the settlement decreased by maximum 35mm and the water content ratio was reduced by 38% at most while the solidity of the ground increased by 5~8 times greater than before preconsolidation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.4
• /
• pp.182-189
• /
• 2021

Porous ceramics were manufactured using the foaming method for the development of inorganic insulating materials. Silica fume and SiO₂ were used as main raw materials, and bentonite was used as a rapid setting agent for uniform structure formation of porous ceramics. The porous ceramics were sintered at 1200℃, and porosity, density, compressive strength, microstructure and thermal conductivity were analyzed. As the content of silica fume to SiO₂ of the porous ceramics increased 70 to 90 %, the specific gravity increased from 0.63 to 0.69, and the compressive strength increased from 9.41 Mpa to 12.86 Mpa. But, the porosity showed a tendency to decrease from 72.07 % to 70.82 %, contrary to the specific gravity. As a result of measuring the thermal conductivity, the porous ceramic with a silica fume content of 70 % showed a thermal conductivity of 0.75 to 0.72 W/m·K at 25 to 800℃, respectively, and, another that a silica fume content of 90 % showed a 0.66~0.86 W/m·K. So the lower the silica f ume content, the lower the thermal conductivity, which was conf irmed to be consistent with porosity result. As a result of microstructure analysis using SEM (Scanning Electron Microscope), pores in the range of tens to hundreds ㎛ were observed inside and outside the porous ceramic, and it was confirmed that the pore distribution was relatively uniform.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.2
• /
• pp.201-208
• /
• 2014

This study was conducted to evaluate the ensiling characteristics and the in situ degradability of a by-product feed (BF)-based silage. Before ensilation, the BF-based mixture was composed of 50% spent mushroom substrate, 21% recycled poultry bedding, 15% ryegrass straw, 10.8% rice bran, 2% molasses, 0.6% bentonite, and 0.6% microbial inoculant on a wet basis and ensiled for up to 4 weeks. The BF-based silage contained on average 39.3% moisture, 13.4% crude protein (CP), and 52.2% neutral detergent fiber (NDF), 49% total digestible nutrient, and 37.8% physically effective $NDF_{1.18}$ on a dry matter (DM) basis. Ensiling the BF-based silage for up to 4 weeks affected (p<0.01) the chemical composition to a small extent, increased (p<0.05) the lactic acid and $NH_3$-N content, and decreased (p<0.05) both the total bacterial and lactic acid bacterial counts from $10^9$ to $10^8$ cfu/g when compared to that before ensiling. These parameters indicated that the silage was fermented and stored well during the 4-week ensiling period. Compared with rice or ryegrass straws, the BF-based silage had a higher (p<0.05) water-soluble and filterable fraction, a lower insoluble degradable DM and CP fraction (p<0.05), a lower digestible NDF (p<0.05) fraction, a higher (p<0.05) DM and CP disappearance and degradability rate, and a lower (p<0.05) NDF disappearance and degradability rate. These results indicated that cheap, good-quality BF-based roughage could be produced by ensiling SMS, RPB, rice bran, and a minimal amount of straw.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.130-133
• /
• 2006

This study was conducted to select Codonopsis lanceolata seed's new pelleting particulate materials and adhesives. Different adhesives (Polyvinyl alcohol (PVA), Carboxymethyl cellulose (CMC), Polyvinyl pyrrolidone (PVP), Xanthan gum (XG), Arabic gum (AG)) and particulate materials (Illite, Diatomite, Pyrophyllite + Illite + Diatomite (PID), Pyrophyllite + Illite + Talc (PIT), Bentonite + Talc (BT)) were tested for seed pelleting. PID for Codonopsis lanceolata seed pelleting appeared to be the best particulate material. Among the pelleting adhesives, PVP was the best adhesive for seed pelleting, and the optimum concentration for germination of pelleting seed was 1 %. Germination rate of the pelleted seeds treated with PID particulate material and PVP adhesive was higher (86.8%) than those of raw seeds (85.5%). $T_{50}$ and MDG of pelleted Codonopsis lanceolata seed required five and eight days at soil moisture content of 50%, respectively.

• Journal of Energy Engineering
• /
• v.12 no.4
• /
• pp.289-301
• /
• 2003

To develop a chemical-looping combustion technology, conceptual design of 50 kW thermal chemical-looping combustor, which is composed of two interconnected pressurized circulating fluidized beds, was performed by means of mass and energy balance calculations. A riser type fast fluidized bed was selected as an oxidizer and a bubbling fluidized bed was selected as a reducer by mass balance for the chemical-looping combustor. Calculated values of bed mass, solid circulation flux, and reactor dimension by mass and energy balance calculations were suitable for construction and operation of chemical-looping combustor. It is concluded from the comparison of the design results and operating values of commercial circulating fluidized bed that the process outline is realistic. Moreover, the previous results support that oxygen carrier particle, NiO/bentonite, fulfills the conversion rates needed for the proposed design. The effects of system capacity, metal oxide content in a oxygen carrier particle, amount of steam input, gas velocity, and solid depth on design values were investigated and the changes in the system performance can be estimated by proposed design tool.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1425-1434
• /
• 2008

The study was conducted to evaluate and compare the effects of feed additives on ruminal fermentation, nutrient digestibility and performance of lambs fed diets containing 60% wet brewers grains (WBG). In Experiment 1, two simultaneous trials were conducted. Fifty intact ($20.2{\pm}0.8kg\;BW$) lambs were used in a feedlot trial and 10 (rumen cannulated; $32{\pm}1kg\;BW$) in a digestion trial. The pH, volatile fatty acids (VFA) and ammonia-N in lambs were also estimated. Lambs were randomly assigned to one of five diets: i) without additives (Con), ii) with 1% bicarbonate (Bic), iii) with 1% bentonite (Ben), iv) with 33 mg/kg monensin (Mon) and v) with 200 mg/kg fibrolityc enzymes (Enz). In Experiment 2, 120 RambouilletPelibuey intact male lambs ($19.5{\pm}1.5kg\;BW$) were used in a feedlot trial and randomly assigned to four diets: i) without additives (control), ii) with 1% Bic, iii) with 33 mg/kg Mon and iv) with 1% Bic and 33 mg/kg Mon. In Experiment 1, lambs fed diets containing Bic or Mon had significantly higher final weight, DMI, ADG than other lambs. However, apparent DM, OM, CP, NDF and ADF digestibilities and ruminal individual VFA content were similar (p>0.05) among treatments. Conversely, treatmentcollection period interaction was significant for ruminal pH and NH3. In Experiment 2, lambs fed diets containing a Bic and Mon combination had significantly higher final weight, DMI and ADG. It is concluded lambs fed Bic or Mon or Bic and Mon combination had better performance characteristics than lambs on Ben or Enz.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.67-75
• /
• 2000

Cosmetic industries have recently developed sun-block products, which are composed of W/O or O/W emulsion system. It was very difficult for waterproofing product to show the stability in W/O emulsion with $TiO_{2}$. To enhance the stability of W/O emulsion, it needs to be combined with the water and oil soluble components as the gelling agents. The emulsifiers used in W/O were 3.0% of cetyl dimethicone copolyol, 2.0% of sorbitan sesquioleate as the basic emulsifiers, and 0.6% of quaternium-18 bentonite and 1.5% of dextrin palmitate as stabilizer were used. The content of titanium dioxide was optimized up to 8.0%. Titanium dioxide was used as the UV scattering powder coated with $Al_{2}O_{3}$(UV-sperse T40/TN). The sunscreen cream prepared with W/O emulsion system by using QB and DP showed higher stability than that of W/O emulsion system by using each QB and DP. W/O emulsion from Formula 3 for passing one year was very durable more than F1 and F2. Within W/O emulsion by observing F1, F2 and F3 for one year, F3 was more excellent than F2 and F3 when they were observed at RT, $4^{\circ}C$, $40^{\circ}C$, because F3 used the mixed QB and DP in W/O emulsion. The zeta potential for F1, F2, and F3 after one year were 21, 30 and 43, respectively. From these result F3 was found best stable emulsion. The in-vitro SPF value for F3 was 35 for the initial product at room temperature and also, the in-vitro SPF values of F3 was 32 for after one year. Finally, the mean in-vivo SPF value of 10 volunteers for F3 was 27.3 by the Korea cosmetic association made the rules of SPF.