• Journal of the Korean Geosynthetics Society
• /
• v.17 no.3
• /
• pp.19-32
• /
• 2018

Gravel Compaction Pile (GCP) method is currently being designed and constructed by empirical method because quantitative design method has not been developed, leading to various types of and frequent destruction such as expansion failure and shear failure and difficulties in establishing clear cause and developing measure to prevent destruction. In addition, despite the difference with domestic construction equipment and material characteristics, the methods applied to the overseas ground is applied to the domestic as it is, leading to remarkable difference between applied values and measured values in variables such as bearing capacity and the settlement amount. The purpose of this study was, therefore, to propose a reasonable and safe design method of GCP method by analyzing the settlement and stress behavior characteristics according to ground strength change under GCP method applied to domestic clay ground. For the purpose, settlement amount of composite ground, stress concentration ratio, and maximum horizontal displacement and expected location of GCP were analyzed using ABAQUS. The results of analysis showed that the settlement and Settlement reduction rate of composite ground decreased by more than 60% under replacement ratio of 30% or more, that the maximum horizontal displacement of GCP occurred at the depth 2.6 times pile diameter, and that the difference in horizontal displacement is slight under replacement ratio of 30%.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.1
• /
• pp.23-36
• /
• 2012

Morphological and mineralogical characteristics of laumontite and adularia in the breccia zone in a fault, Yangbuk-myeon, Gyeongju, Korea suggest that they formed by reaction with hydrothermal alteration related to fault activity. Laumontite commonly occurring in the breccia zone is related to the presence of hydrothermal fluids bearing alkaline elements in the zone. Laumonite is characterized by elongated columnar form with aspect ratio varying 5~10. Laumontite and adularia whose characteristic euhedral forms are indicative of the latest product formed as rapid precipitation from fluids or replacements of Ca-plagioclase. Hydrothermal fluids reacted with intensively fractured granite, typical with high permeability, leached alkaline elements such as Ca, K, allowing laumontite and adularia to be precipitated under neutral to weak alkaline conditions. It is noteworthy that the formation process and genesis of low temperature minerals such as laumontite and adularia are very similar to those formed by wallrock alteration or hydrothermal alteration that occurred in epithermal deposits. Taking into account its characteristic morphology and chemistry, authigenic K-feldspar that commonly forms at low temperature in many fault zones must be adularia.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1512-1512
• /
• 2001

The University of Cordoba conducts since 1991 a breeding program to obtain new olive cultivars from intraspecific crosses. The objective is to obtain new early bearing and high-quality cultivars. In plant breeding, many seedlings must be tested to increased the chance of getting desirable genotypes. Therefore, fast, cheap and accurate methods of analysis are necessary. The conventional laboratory techniques are costly and time-consuming. Near Infrared Spectroscopy (NIRS) can satisfy the characteristics requested by plant breeders and offers many advantages such as the simultaneous analysis of many traits and cheap cost. The objective of this work was to asses the performance of NIRS to estimate oil fruit components (fruit weight, flesh moisture, flesh/stone ratio and oil flesh content in dry weight basis) and fatty acid composition in olive fruit. Genotypes from reciprocal crosses between ‘Arbequina’, ‘Frantoio’ and ‘Picual’ cultivars have been used in this study. A total of 287 samples, each from a single plant, were scanned using a DA-7000 Diode Array VIS/NIR Analysis System (Perten Instruments), which covers the visible and NIR range from 400-1700 nm. All samples were analysed for fatty acid composition (gas chromatography) and 220 for oil fruit components (oil content by nuclear magnetic resonance), 70% and 30% of samples were randomly assign for the calibration and validation sets respectively. The preliminary results shows that calibration for palmitic, oleic and linoleic acids were highly accurate with calibration and validation values of $r^2$ from 0.85 to 0.95 and 0.76 to 0.91 respectively. Calibration for palmitoleic and estearic acids were less accurate, probably because of the narrow range of variability available for these fatty acids. For the oil fruit components, calibration were high accurate for flesh moisture and oil flesh content in dry weight basis ($r^2$ higher than 0.90 in both calibration and validation sets) and less accurate for the other characteristics evaluated. The first results obtained indicate that NIRS analysis could be an ideal technique to reduce the cost, time and chemical wasted necessary to evaluate a large number of genotypes and it is accurate enough to use for pre-selecting genotypes in a breeding program.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.3
• /
• pp.513-522
• /
• 2010

Objectives : This study aimed to determine self-esteem and oral health impact profile (OHIP) of orthodontic patients to get data necessary for the process of consultation, education, and treatment for those patients who hoped to get orthodontic therapy in order to see effects of orthodontic therapy on personal life in consideration of general characteristics of those patients under orthodontic therapy. methods : A self-administered questionnaire was used among 232 outpatients under orthodontic therapy from October to November 2009, obtaining the following results. Results : 1. As for general characteristics of respondents, those under 19 years of age constituted 46.6%; the unmarried comprised 85.8%; and students constituted 53.4%. 2. Most respondents were getting orthodontic therapy for beauty (41.8%) and dental health (40.5%). Family (54.3%) contributed to their decision to get orthodontic therapy; parents or siblings (62.5%) were bearing the treatment expenses. 3. Females were getting orthodontic therapy for an aesthetic purpose (50.3%), and male for the purpose of dental health (44.6%) (P<0.01). 4. OHIP was slightly higher among males ($4.10{\pm}0.61$) than among female ($4.00{\pm}0.78$), and was highest among those 19 years old and under ($4.17{\pm}0.67$); the older they were, the lower it was significantly (P<0.05). Most of them were earning 3 to 4 million won ($4.22{\pm}0.72$); the married ($4.05{\pm}0.74$) constituted higher percentage. As for occupation, students ($4.13{\pm}0.66$) comprised the highest percentage. 5. Self-esteem was higher among males ($3.83{\pm}0.47$) than among females ($3.80{\pm}0.50$), and was highest among those 25 to 29 years old ($3.92{\pm}0.46$). Most of them were earning more than 5 million won ($3.91{\pm}0.42$), which was statistically significant (P<0.01). The married ($3.91{\pm}0.54$) constituted higher percentage than the unmarried ($3.80{\pm}0.48$); office managers ($3.95{\pm}0.55$) comprised the highest percentage. 6. As for correlation between variables effecting OHIP of orthodontic patients, there was negative correlation in age (r=-0.225) and positive correlation in occupation (r=0.122). As for correlation between variables effecting self-esteem of orthodontic patients, there was negative correlation in occupation (r=-0.130) and positive correlation n income (0.126), while there was positive correlation (r=0.202) between OHIP and self-esteem of orthodontic patients. Conclusions : Younger orthodontic patients who were students showed higher OHIP, and professionals earning more showed higher self-esteem. Orthodontic patients with higher OHIP showed higher self-esteem. Therefore, it is necessary to develop a program based on OHIP and self-esteem in consulting and treating orthodontic patients; since it is considered that orthodontic therapy will improve appearance, enhance self-confidence, and have positive effects on interpersonal relationships and quality of living, researches are necessary on constant changes in psychological properties.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.85-96
• /
• 2017

Gold mineralization of Samjeong and Yongjang gold mines in Uichang area shows characteristics of Bonanza-type gold deposits. Ores are mainly developed along the contact parts between quartz vein and arkosic sandstone beds(Fe-rich bed) in sedimentary rock. Electrum, silver sulfide and sulfate minerals are mainly in the ores. On the other hand, gold mineralization is less developed in cherty rock and andesitic rock than arkosic sandstone. The study highlights characteristics of gold precipitation in the deposit on the basis of numerical modelling of the reactions between the assumed hydrothermal ore fluids with multicomponent heterogeneous equilibrium calculations. Aqueous species, gases and minerals, containing electrum are included in the calculations. The reaction result between hydrothermal ore fluids and arkosic sandstone show that pH increasing in the ore-forming fluid would trigger precipitation of quartz, chlorite, sericite, chalcopyrite, galena, pyrite, electrum, actinolite and feldspar. The numerical modelling also illustrates the drastic increase of pH and desulfidation lead to precipitation of electrum. Ag/Au ratios in the ore vary with pH conditions and subsequently precipitation of silver-bearing sulfides such as acanthite and polybasite. The modelling of the reaction between andesitic rock and ore-forming fluid shows that mineral assemblages of the case are analogous to ones of the reaction between arkosic sandstone and fluid except the latter has little portion of electrum. The abovementioned modelling results suggest that gold-silver mineralization is bounded by host rocks at the study area.

• The Journal of Engineering Geology
• /
• v.15 no.2 s.42
• /
• pp.185-199
• /
• 2005

Properties of sliding materials are dependent on the lithology because debris is the product of rock weathering processes. In order to characterize transportation behavior of debris dependent of debris types, this study selected 26 debris flows over three areas composed with different rock weathering types and topographic conditions. Analyses of lithology, weathering, and topographic characteristics were performed by detailed field survey. Based on the field survey data, transportation behavior of debris was studied at the aspect of the relationship of grain size and volume of debris as well as topographic conditions. According to the study results, change of slope angle is very influential factor on runout distance of debris among the topographic factors. Because the sliding velocity and the energy of debris are frequently changed and more irregular on an undulating slope, the unout distance of debris is larger than that of an uniformly dipping slope. Runout distance of debris is also influenced by volume and grain size of debris. Volume of debris in the gabbro is four or five times larger than that of the granite area because it is controlled by the lithology. Considered with grain size distribution, runout distance of debris is longer in the gabbro area which is composed with irregular grain size bearing large corestones than that in the medium grained granite area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.447-454
• /
• 2017

Using two large coast guard ships at sea, we created four encounter situations ($000^{\circ}$, $045^{\circ}$, $090^{\circ}$, $135^{\circ}$) with high possibility of collision, from 3 NM up to 0.25 NM. As relative distance was gradually decreased, the subjects were measured at 0.25 NM intervals and perceived ship collision risk (PSCR) was determined by looking at the opponent ship. Characteristics were statistically analyzed using the obtained data. The purpose of this study was to analyze the characteristics of collision risk values obtained from twelve intervals, from 3 NM to 0.25 NM relative to encounter situations by curve fitting with appropriate polynomials, to determine the distance from which the change in perceived collision risk is greatest. As a result, an optimal regression equation for each distance interval was derived from each analysis direction. The greatest variation in average collision risk value was over the range 1.25 ~ 1 NM, and the collision risk value was largest at 1 NM. The maximum change in perceived collision risk was at 1 NM. These results can contribute to preventive guidelines to minimize human error in close proximity situations with a high probability of ship collision.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.7
• /
• pp.3035-3042
• /
• 2015

Background: Isorhamnetin (Iso), a novel and essential monomer derived from total flavones of Hippophae rhamnoides that has long been used as a traditional Chinese medicine for angina pectoris and acute myocardial infarction, has also shown a spectrum of antitumor activity. However, little is known about the mechanisms of action Iso on cancer cells. Objectives: To investigate the effects of Iso on A549 lung cancer cells and underlying mechanisms. Materials and Methods: A549 cells were treated with $10{\sim}320{\mu}g/ml$ Iso. Their morphological and cellular characteristics were assessed by light and electronic microscopy. Growth inhibition was analyzed by MTT, clonogenic and growth curve assays. Apoptotic characteristics of cells were determined by flow cytometry (FCM), DNA fragmentation, single cell gel electrophoresis (comet) assay, immunocytochemistry and terminal deoxynucleotidyl transferase nick end labeling (TUNEL). Tumor models were setup by transplanting Lewis lung carcinoma cells into C57BL/6 mice, and the weights and sizes of tumors were measured. Results: Iso markedly inhibited the growth of A549 cells with induction of apoptotic changes. Iso at $20{\mu}g/ml$, could induce A549 cell apoptosis, up-regulate the expression of apoptosis genes Bax, Caspase-3 and P53, and down-regulate the expression of Bcl-2, cyclinD1 and PCNA protein. The tumors in tumor-bearing mice treated with Iso were significantly smaller than in the control group. The results of apoptosis-related genes, PCNA, cyclinD1 and other protein expression levels of transplanted Lewis cells were the same as those of A549 cells in vitro. Conclusions: Iso, a natural single compound isolated from total flavones, has antiproliferative activity against lung cancer in vitro and in vivo. Its mechanisms of action may involve apoptosis of cells induced by down-regulation of oncogenes and up-regulation of apoptotic genes.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.4
• /
• pp.421-432
• /
• 2009

In this study, push-out and static loading tests were conducted to evaluate the behavioral characteristics of composite beams with a perfobond rib shear connector. The shear capacity of the perfobond rib was found to be proportional to its concrete strength, which is in turn affected by the increase in the concrete end-bearing strength and concrete dowel action to resist the shear force. The relative slips of the push-out specimen, however, which was used to assess the ductility of the shear connector, increased to some extent, but it no longer increased when it reached the critical concrete strength because of the flexibility of the transverse rebar in the rib hole. The static-loading-test results revealed a crack on the concrete slab in the composite beam with a perfobond rib on the side of the rib hole and transverse rebar for the applied moment and shear force to the rib hole, depending on the static loading. The shear resistance characteristics of the perfobond rib shear connector were found to resist the shear force from the relative slip on the interface of the composite beam. Thus, the sectional effect of the shear connector to the composite beam with a perfobond rib should be considered when designing the composite beam because the behavior of the composite beam can change owing to the shear connector.

• Journal of the Korean earth science society
• /
• v.26 no.1
• /
• pp.78-92
• /
• 2005

Petrographical and petrochemical analyses for late Miocene basalts in Goseong-gun area. Gangwon province, were carried out to interpret the characteristics and the origin of magma. The basaltic rocks occurred as plug-dome in the summit of several small mountain and developed columnar jointing with pyroxene-megacryst bearing porphyritic texture. And the basalt contains xenoliths of biotite granite (basement rocks), gabbro (lower crustal origin) and Iherzolite(upper mantle origin). The basalts belong to the alkaline basalt field in TAS diagram and partly belong to picrobasalt and trachybasalt field. On the tectonomagmatic discrimination diagram f3r basalt in the Goseong-gun area. they fall into the fields for the within plate and oceanic island basalt. The characteristics of trace elements and REEs shows that primary magma for the basalt magma would have been derived from partial melting of garnet-peridotite mantle. This late Miocene basalt volcanism is related to the hot spot within the palte.