• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.26-29
• /
• 2006

Samples of kenaf (Hibiscus cannabinus) grown in Malaysia were examined to determine the kraft pulp and paper-making properties of their bast (or bark) fibers. Using kraft pulping process showed that bast fibers were relatively easy to cook resulting good pulp yields in the range of 45-51 %. The bast pulp produced sheets with great density, tear index and dry zero-span breaking length. Kenaf bast fiber is considered promising for production of high-grade printing, writing and specialty papers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.48-55
• /
• 2007

The aim of this article is to review the general property of the famous traditional Korean paper, "rice straw paper"(Bast-Fiber mixed with straw pulp), and to compare the paper qualities varying with the composition ratio of straw pulp, in order to revive the traditional paper in modem Korea. The experiment was carried out by making first the two different mixture papers, i. e., one is the paper of 50% bast fiber mixed with 50% straw pulp, and the other is the paper of 75% bast fiber with 25% oats straw pulp, and finally the 100% bast fiber paper was made for the purpose of comparison. The qualitative properties of these three kinds of paper with the different mixing ratio of the straw pulp were evaluated, and the findings of the experiment can be summarized as follow: 1. As to the quality aspects of the paper strength like tensile strength, breaking length, elongation, and tear strength, the test proved the 100% bast fiber paper as best, and the 50% mixed paper as the next good one. 2. In aspect of the printing adaptability such as density, opacity, brightness, whiteness, lab colors, air permeability, and roughness, the 50% mixed paper proved to be the best, due to the short cells in the straw pulp. 3. As to the air permeability, the larger ratio of straw pulp was found to be the lesser, and 75% bast fiber with 25% straw pulp mixture paper and the 100% bast fiber one were found 1/5 degree efficient. 4. In terms of the water absorption degree, 100% bast fiber paper was the fastest, but in case of mixture paper, 50% mixed one was a little faster up to the point of 1cm, while the two kinds of mixed ones appear to be almost similar to each other beyond the point. 5. The straw pulp mixed paper, especially the 50% mixed one was evaluated as the highest by the calligraphers who had experienced using the papers in terms of movement and feeling of the caligraphy and painting. In addition, although the 25% mixed paper is judged to be good for book printing because of the strength, the 50% mixed paper can be thought to be more desirable for painting and calligraphy. In conclusion, we will be able to make the quality paper with durability, by mixing the straw pulp with the bast fiber in proper ratio, following the tradition of Korean paper making.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.2
• /
• pp.74-84
• /
• 1998

This study was carried out to investigate the papermaking characteristics of paper mulberry(Broussonetia kazinoki) for new Korean traditional paper(Hanji). Hanji has been traditionally made only with the bast fiber of paper mulberry. Besides mulberry bast part, wood core was utilized separately or in mixed forms as raw materials for the new Hanji. Hanjis made from the solfomethylated pulp were shown higher brightness and sheet strengths than those from alkali and alkali-hydrogen peroxide pulps. The brightness of solfomethylated pulp was found to be high enough not to need additional bleaching. In the physical properties of the Hanjis mixed with bast part and wood core pulps, the handsheet strengths were decreased as the increase of the wood core pulp contents. But the sheet strengths of Hanjis containing 10∼30% of wood core pulps were higher than those of the Hanji containing bast part pulp only. The sheet formations were improved as the increase of wood core pulp contents, while the sheet strengths were decreased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.2
• /
• pp.85-95
• /
• 1998

Traditionally, Hanji had been made only with the bast fiber of paper mulberry (Broussonetia kazinoki). Nowadays, Hanji has been made mainly in the mixed forms of paper mulberry bast fiber and waste paper, and consequently it has raised many problems using them. This study was carried out to investigate the characteristics of Hanji mixed with paper mulberry bast part and whole stalk pulps. Hanjis made from the solfomethylated pulp were shown higher brightness and sheet strengths than those from alkali and alkali-hydrogen peroxide pulps. The brightness of solfomethylated pulp was found to be high enough not to need additional bleaching. The sheet formations were improved as the increase of whole stalk pulp contents, while the sheet strengths were decreased. In the physical properties of the Hanji mixed with bast part and whole stalk pulps, the handsheet strengths were decreased as the increase of the whole stalk pulp contents. The tensile strength and folding endurance of the Hanji containing 40∼60% of whole stalk pulps were higher as compared to the others.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.57-64
• /
• 2008

In general, the entire of paper mulberry bark, which is not cut into pieces with an appropriate length, have been used in the pulping. This kind of pulping method couldn't accomplish the improvement of beating and sheet forming efficiency. For this reason, we investigated the effects of the cutting length of paper mulberry bast fiber on pulping and Hanji (Korean traditional paper) properties, in order to develop high quality Hanji manufacturing process. The cutting length variation of paper mulberry white bast did not great effects on pulp yields. The pulp yields based on pulping methods were sulfomethylated pulping av. 57.4%, alkali-hydrogen peroxide pulping av. 55.4%, and alkaline pulping av. 53.5% respectively. The optical properties such as brightness, opacity, scattering coefficient, and absorption coefficient were slightly improved by the increase of paper mulberry white bast cutting length. The increase of paper mulberry white bast cutting length resulted in poor sheet formation. Physical properties such as breaking length, TEA, tear index, burst index, and folding endurance were slightly improved by the increase of cutting length. The modified pulping processes, which used sulfomethylated method and alkali-hydrogen peroxide method, showed better pulp and sheet properties than conventional alkaline pulping.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.2
• /
• pp.43-50
• /
• 1992

This study was carried out to investgate the possiblity of using waste bamboo and bast fiber from paper mulberry for Hwaseonji production. 3 types of Hwaseonji were made in an experimental system, 100% bamboo pulp, bamboo pulp mixed with bast fiber in two different ratios, 70% : 30% and 40% : 60%, respectively. The result were as follows: 1. The chinese ink blots of Hwaseonji made from bamboo pulp only was satisfactory, but its tensile strength showed a low value. In order to improve the tensile strength, we must develope a new beating method with musilige. 2. The burst strength increased as the bast fiber content increased. But it is a special characteristic of Hwaseonji, that an even formation of paper is required. Therefore, only the short bast fiber is needed. 3. The tensile strength was raised by increasing the bast fiber content to 60%, resulting in a more durable Hwaseonji. 4. In even thickness, the higher opacity showed the more bast fiber. So the opacity of product III (bamboo: 40%, bast fiber: 60%) is the highest. 5. The commodity value of hand-made paper should be grade-up after a dedusting process.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.45-52
• /
• 2007

Whole, bast and core fibers of kenaf cultivar Tainung-2 were pulped under different pulping methods, thermomechanical and kraft pulping methods. The physical and optical properties of kenaf TMP(thermomechanical pulp) and KP(kraft pulp) handsheets were investigated and the results from the study are summarized as follows: Yields of TMP and KP were $77{\sim}87%\;and\;43{\sim}52%$, respectively. There was no significant change in apparent density between kenaf KP and USKP(unbleached softwood kraft pulp) but TMP showed a little lower apparent density. Bast pulp had the lowest apparent density regardless of pulping methods. Tensile strength of kenaf KP was higher than that of TMP but similar to that of USKP. Both TMP and KP handsheets of bast fraction showed the highest tear strengths among whole, bast, and core fractions. Core fraction showed the lowest tear strengths under different pulping methods. In general burst strength of kenaf pulp under different pulping methods was lower than that of USKP, and kenaf pulp had better stiffness than USKP. Brightness of kenaf KP and TMP was higher than that of USKP. There was no significant variation in opacity between kenaf pulp and USKP even though kenaf pulp showed a little lower opacity. The main difference in paper quality between the core fiber and bast fiber is derived from the fact that bast fiber is long and thin, whereas core fiber is short and thick.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.83-89
• /
• 1999

Bast fibers of paper mulberry ( Broussonetia Kazinoki Sieb) were cooked with a weak alkaline salt, potassium carbonate which has been known as a major inorganic component of the traditional lye, and its cooking characteristics were investigated . The bast fiber was easily cooked by potassium carbonate. The pulp yield was rapidly decreased up to 20-30 mol of potassium carbonate, but the Kappa number was slowly decreased with increasing of potassium carbonate. The potassium carbonate pulps were easily defibered at low cooking chemical charge of 25mm on and high pulp yield of about 80%. These results were confirmed that pectin was easily removed during the potassium carbonate cooking. In contrast, when sodium carbonate was used as a cooling agent, the bast fiber was only partially defibered. Thus, sodium carbonate was a less effective cooling chemical of the bast fiber. The results of this experiment indicated that potassium carbonate could not only be used as a good cooling agent of bast fiber, but also as an alternative agent of sodium hydroxide.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.38-46
• /
• 2006

This study was carried out to investigate the sheet properties of Morus Hanji, made by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping, and different stocks composed to bast and whole stalk fibers. Two species of Morus, M. alba and M. lhou, were used. Pulp yield of the whole stalk parts, its brightness and opacity were higher than those of bast part. In particular sulfomethylated pulp has higher brightness of $62{\sim}63%$, than other pulps(average brightness $30{\sim}40%$). In mechanical properties, paper made of bast fiber has higher strength than those of the whole stalks. Hanji made from M. lhou, whole stalk, and sulfomethylated pulp gave better sheet formation and higher strength than those of the others. Hanji from M. alba bast fiber and whole stalk pulps were not so good sheet properties.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.78-86
• /
• 2005

Hwaseonji(Korean traditional paper) used for writing and painting has been made from the mulberry bast-fiber and the short-length fiber pulps, wood pulps. However, besides wood pulps, other short-length fiber pulps also can be used instead of wood pulps. Hence, this research was carried out to make the various Hwaseonjis with the different properties, using the five kinds of short-length fiber pulps respectively. The short-length fiber pulps used in this research were softwood bleached kraft pulp(SwBKP) hardwood bleached kraft pulp(HwBKP), rice-straw bleached sulfite pulp(RsBSP), bamboo bleached kraft pulp(BbBKP) and recycled pulp from vellem paper(RP). And, the mixture ratios of the mulberry bast-fiber pulp and short-length fiber pulps were 100:0, 80:20, 60:40, 40:60 and 20:80. After various Hwaseonjis were made from different mixtures mentioned above with hand-made method, physical properties and chinese ink blot property of each paper were measured. The strengthes were the highest in the Hwaseonji made from the mixture of the mulberry bast-fiber pulp and SwBKP. However, chinese ink blot property and smoothness were better when RsBSP, BbBKP or RP were mixed into the mulberry bast-fiber pulp. As a result, the various kinds of Hwaseonjis which the users can choose based on their needs were made.