• Asian-Australasian Journal of Animal Sciences
• /
• 제24권11호
• /
• pp.1547-1551
• /
• 2011

Bakery waste (BW) is much cheaper than barley (20 to 40% the price of barley). Bakery waste and barley grain have similar chemical composition; they contain 99 and 97% organic matter (OM), 1.1 and 1.8% fat, 18 and 15% neutral detergent fibre (NDF) and 14.0 and 14.5% crude protein (CP), respectively (DM basis). The objectives of this study were to determine the effect of substituting BW for barley grain in high concentrate fattening diets for lambs on nutrient intake, growth and carcass characteristics. Forty Awassi lambs (21.75${\pm}$1 kg) weaned at the age of 65 days were assigned randomly to four experimental fattening diets differing in BW ratio in a completely randomized design. The control diet (CON) contained 20, 60, 11, 7, and 2% (DM basis) wheat straw, barley grain, soybean meal, corn grain, and minerals and vitamin mix, respectively. Bakery waste substituted barley grain by 10, 20 and 30% of the diet DM in the LBW, MBW and HBW diets, respectively. The experiment lasted for 56 days. Dry matter intake (DMI) decreased (p<0.05) in LBW diet compared to the CON diet by approximately 10%. No further reduction in DMI was observed with the higher substitution levels. Metabolizable energy intake for the CON diet (3.6 Mcal/d) was also reduced (p<0.05) compared with LBW, MBW and HBW diets (3.4, 3.4 and 3.3 Mcal/d, respectively). Final body weight for lambs fed the CON diet (34.8 kg) was higher (p<0.05) compared with lambs fed the LBW, MBW and HBW diets (30.6, 32.0 and 31.1 kg, respectively). Growth rate for lambs fed the CON diet (232 g/d) was also higher (p<0.05) compared to lambs fed the LBW, MBW and HBW diets (170, 189, and 167 g/d, respectively). Feed to gain ratio was higher (p<0.05) for lambs fed the LBW, MBW and HBW diets (7.2, 6.6 and 7.3, respectively) compared with lambs that consumed the CON diet (5.7). Body weight gain cost was reduced by approximately 8% by the MBW and HBW diets as compared with the CON diet. Dressing percentage, full gut weight, empty gut weight and liver weights were all unaffected by the BW addition to the diets and averaged 48.9%, 6.8 kg, 2.8 kg and 0.444 kg, respectively. However, fat tail weight was increased (p<0.05) with the higher levels of the BW inclusion. In conclusion, substituting BW for barley grain reduced DMI and growth performance. However, when BW substituted barley grain at the 20 and 30% of the diet DM, body weight gain cost was reduced by approximately 8%.

• 한국환경과학회지
• /
• 제22권3호
• /
• pp.379-383
• /
• 2013

This study was conducted to investigate the changes in nitrogen and soluble reactive phosphorus(SRP) contents from hanwoo manure using probiotics to feed and manure additives during 5 weeks. A total of 45 hanwoo(24 months old) with averaging $580{\pm}20$ kg in weight were randomly assigned to 3 dietary treatments with 3 replicates per treatment(5 hanwoo per pen, $5{\times}8m$). The treatment were supplemented, control, T1(10 kg roughage + 2 kg concentrate(2% probiotics as-fed basis)), and T2(10 kg roughage + 2 kg concentrate(2% probiotics as-fed basis) + 7 kg probiotics on the surface of hanwoo manure (top-dressing)). During the experimental period, there were statistically significant differences(P<0.05) in pH values at 3 and 5 weeks; TN contents at 5 weeks; and SRP contents at 5 weeks in all treatments. Adding probiotics to feed or feed and manure increased manure pH in comparison with controls. As time increased, changes in TN contents decreased in the order: T2 > Control > T1. Especially, the reduction in SRP contents in all treatments at 5 weeks was in following order: T1 > T2 > Control. This result suggests that it is possible to make efficient use of probiotics as feed and manure additives for reducing environmental pollution or to provide fundamental information on livestock managements to producers.

• 스마트미디어저널
• /
• 제12권5호
• /
• pp.28-35
• /
• 2023

본 연구에서는 음성감정인식의 적용 가능성과 실용성 향상을 위해 적은 수의 파라미터를 가지는 새로운 경량화 모델 RoutingConvNet(Routing Convolutional Neural Network)을 제안한다. 제안모델은 학습 가능한 매개변수를 줄이기 위해 양방향 MFCC(Mel-Frequency Cepstral Coefficient)를 채널 단위로 연결해 장기간의 감정 의존성을 학습하고 상황 특징을 추출한다. 저수준 특징 추출을 위해 경량심층 CNN을 구성하고, 음성신호에서의 채널 및 공간 신호에 대한 정보 확보를 위해 셀프어텐션(Self-attention)을 사용한다. 또한, 정확도 향상을 위해 동적 라우팅을 적용해 특징의 변형에 강인한 모델을 구성하였다. 제안모델은 음성감정 데이터셋(EMO-DB, RAVDESS, IEMOCAP)의 전반적인 실험에서 매개변수 감소와 정확도 향상을 보여주며 약 156,000개의 매개변수로 각각 87.86%, 83.44%, 66.06%의 정확도를 달성하였다. 본 연구에서는 경량화 대비 성능 평가를 위한 매개변수의 수, 정확도간 trade-off를 계산하는 지표를 제안하였다.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.45-50
• /
• 2005

In this study, the casting/forging process was applied in manufacturing a low control arm, in order to prove that application of casting/forging process to Al6061 is likely to get the effect of light weight compared with existing steel products and to reduce the cost of materials. Firstly, In order to set up the optimum casting condition of the forging material, Al6061, casting experiments were carried out by controlling pouring temperature of the aluminum for casting, mold temperature, and pouring time. $700^{\circ}C$ pouring temperature, $300^{\circ}C$ mold temperature and 10-second pouring time were taken into account as the optimum casting conditions. With respect to a hot forging test, it is practiced on the basis of a temperature of materials, strain rate, and reduction rate so as to observe each microstructure and examine strain-stress curve simultaneously; examine tensile test and hardness test; eventually set up the optimum hot forging condition. A hot forging test, tensile test, hardness experiment, and microstructure observation were carried out on condition of $70\%$ reduction rate, $500^{\circ}C$ temperature of materials, and 1 strain rate. As a result of those experiments, 330MPa tensile strength, $16.4\%$ elongation, and 122.8Hv hardness were recorded. In oder to get a sound preform which has no unfitting cavity and less flash, two preforms were proposed on the basis of volume rate of the final product; the optimum volume rate of preform for the low control arm was $115\%$. In conclusion, it is confirmed that using the forging material rather than casting materials in casting/forging process is likely to get more superior mechanical properties. Compared with Al6061, performed by means of general forging, moreover, cast/forged Al6061 can not only stimulate productivity by reducing production processes, but cut down the cost of materials by reusing forging scraps.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1064-1073
• /
• 2015

In this study, we introduce the pedestrian detection system by using the feature of HOG-PCA and RBFNNs pattern classifier. HOG(Histogram of Oriented Gradient) feature is extracted from input image to identify and recognize a object. And a dimension is reduced for improving performance as well as processing speed by using PCA which is a typical dimensional reduction algorithm. So, the feature of HOG-PCA through the dimensional reduction by using PCA leads to the improvement of the detection rate. FCM clustering algorithm is used instead of gaussian function to apply the characteristic of input data as well and connection weight is used by polynomial expression such as constant, linear, quadratic and modified quadratic. Finally, INRIA person database known as one of the benchmark dataset used for pedestrian detection is applied for the performance evaluation of the proposed classifier. The experimental result of the proposed classifier are compared with those studied by Dalal.

• 한국연초학회:학술대회논문집
• /
• 한국연초학회 2000년도 24회 정기총회 및 43회 학술발표회
• /
• pp.12-21
• /
• 2000

The smoke from a burning cigarette is classified as mainstream, which is the smoke inhaled by the smoker during a puff, and sidestream, which is defined by ISO 10185 as all smoke which leaves a cigarette during the smoking process other than from the butt end. Most of the sidestream smoke is generated during static burn, that is, in between puffs. The amount of sidestream smoke generated by a cigarette depends on the cigarette construction, tobacco blend, and properties of the cigarette paper, The main paper properties affecting sidestream smoke generation are: porosity, basis weight, type and amount of filler, type and amount of burn additive.Sidestream smoke is composed of a visible phase (small liquid droplets) and an invisible phase (gaseous molecules). This paper focuses on the visible portion of the sidestream smoke. Optical methods, which are based on the relationship between light scattering and density of the rising plume of smoke, have been used successfully by the industry. However, the present trend is to use gravimetric methods where the particulate matter is captured on a Cambridge(R) filter pad and weighed. The gaseous portion of the sidestream smoke, which does not contribute to the visible sidestream smoke, passes through the Cambridge filter pad.Sidestream smoke reduction is achieved by modifying certain mass transport processes occurring in a smoldering cigarette. There are four main pathways for reducing sidestream smoke: A) less tobacco burned, B) slower rate of tobacco combustion, C) more efficient trapping of smoke by the cigarette paper, and D) more complete combustion of tobacco. This paper discusses how the physical properties of paper and cigarette construction affect sidestream smoke reduction via the above four mechanisms.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.744-752
• /
• 2012

In this study, the Polynomial-based Radial Basis Function Neural Networks is proposed as an one of the recognition part of overall face recognition system that consists of two parts such as the preprocessing part and recognition part. The design methodology and procedure of the proposed pRBFNNs are presented to obtain the solution to high-dimensional pattern recognition problems. In data preprocessing part, Principal Component Analysis(PCA) which is generally used in face recognition, which is useful to express some classes using reduction, since it is effective to maintain the rate of recognition and to reduce the amount of data at the same time. However, because of there of the whole face image, it can not guarantee the detection rate about the change of viewpoint and whole image. Thus, to compensate for the defects, Linear Discriminant Analysis(LDA) is used to enhance the separation of different classes. In this paper, we combine the PCA&LDA algorithm and design the optimized pRBFNNs for recognition module. The proposed pRBFNNs architecture consists of three functional modules such as the condition part, the conclusion part, and the inference part as fuzzy rules formed in 'If-then' format. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of pRBFNNs is represented as two kinds of polynomials such as constant, and linear. The coefficients of connection weight identified with back-propagation using gradient descent method. The output of the pRBFNNs model is obtained by fuzzy inference method in the inference part of fuzzy rules. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of Differential Evolution. The proposed pRBFNNs are applied to face image(ex Yale, AT&T) datasets and then demonstrated from the viewpoint of the output performance and recognition rate.

• 한국포장학회지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2013

한국과 일본 제품 간의 포장공간비율, 포장재 사용량을 분석하여 양국의 포장재 사용현황을 비교하였으며, 국내 제과류 포장의 개선 방향을 제시하기 위하여 국내 제품을 재설계하여 원천감량 가능성을 알아보았다. 일본제품이 한국 제품보다 전반적으로 단위 제품 당 적은 포장 면적을 이용하고 있으며, 상대적으로 낮은 공간비율을 보여 국내의 제품보다 작은 포장에 많은 양의 제품을 충전하고 있는 것으로 나타났다. 또한 일본 제품의 필름을 분석한 결과, 재질이 단순화된 2중의 올레핀계열의 필름을 많이 이용하고 있음에도 상대적으로 좁은 실링폭의 포장설계가 많았다. 출시된 국내 제품과 비교하여 포장 공간 용적과 실링폭을 감소시킨 원천감량 포장 샘플을 설계해봄으로써 국내 제과류의 경우 15% 이상의 원천감량이 가능함을 알 수 있었다.

• 미생물학회지
• /
• 제21권2호
• /
• pp.86-94
• /
• 1983

Polygalacturonase of Byssochlamys fulva was purified and characterized. Specific activity increased from 2.21 units/mg protein to 10.47 units/mg protein through $(NH_4)_2SO_4$ treatment, SephadexG-100 gel filtration, and DEAE-Sephadex ion exchange chromatography. Divalent cations, such as $Ca^{++}\;and\;Cu^{++}$, increased polygalacturonase activity greatly. Added as $10^{-3}M$ concentration, $Ca^{++}$ ion enhanced enzyme activity 9.8folds. Optimum temperature was $50^{\circ}C$ and optimum pH was 5.0. Activation energy of reaction was 8.69 Kcal/mole. Michaelis-Menten $constant(K_M)\;and\;V_{max}$ of reaction were $6.27{\times}10^{-3}mole/l\;and\;2.85{$\mu}moles/min$. Polygalacturonase of Byssochlamys fulva preferred polygalacturonic acid to pectin as substrate and was presumed as endo-type on the basis of the relationship between viscosity reduction and substrate degradation. Molecular weight of polygalacturonase was estimated as 55,000.

• BMB Reports
• /
• 제28권3호
• /
• pp.275-280
• /
• 1995

The respiratory burst oxidase of neutrophils is a multicomponent enzyme, domant in resting cells, that catalyzes the reduction of oxygen to $O_{2}^{-}$ at the expense of NADPH. In the resting neutrophil, some of the components of the oxidase, including proteins p47 and p67, are in the cytosol, while the rest are in the plasma membrane. Recent evidence has suggested that at least some of the cytosolic oxidase components exist as a complex. The cytosolic complex with a molecular weight of ~240 kDa was found to bind to blue-agarose and 2',5'-ADP-agarose, which recognize nucleotide requiring enzymes. In order to identify the nucleotide binding component of the cytosolic complex we purified recombinant p47 and p67 fusion proteins using the pGEX system. Pure recombinant p47 was retained completely on 2',5'-ADP-agarose, whereas pure recombinant p67 did not bind to these affinity beads. On the basis of these results, we infer that p47 may contain the nucleotide binding site.