• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.139-148
• /
• 2009

In this study, we tried to verify the effectiveness of 3D scans of clothed participants from 20 to 24 year old men in fit analysis process. Carrying out fit analysis, we used 3D scan data and direct fit evaluation with the basic garments made as semi-fitted bodice pattern for men. The result of fit evaluation through 3D scan data showed the expert rated fitting items more positive than direct fit evaluation. Even though, generally there was a no significant difference in the response between 3D and direct fit analysis. Only there was a significant difference in the response to the specific place such as the center front line, neckline, shoulder seam, and etc. There was a no significant difference between the result of 3D scan and direct fit evaluation in the subjects' group. Also the result of assessment of 3D targeting consumers showed very positive and interested in using 3D scans for fit analysis. The ability to rotate the 3D scans for a variety of views proved to be a very effective process to analyze fit. Moreover, digital data is easily accessed at any locations and any time. Fit analysis using 3D scans could be great tool for not only fit evaluation in research but also better fitting in apparel industry.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.776-786
• /
• 2016

This study intends to suggest production process of circular knitted jackets and dimensional change data of finished clothes after washing. the study provides pattern design method of circular knitted jackets by applying dimensional change. By doing so, the purpose of this study is to increase production efficiency through accurate order in consideration of loss amount of the fabrics in production. With the three fabric materials selected, this study investigated dimensional change of circular knitted jackets after sewing and washing by varying the parts to be attached to padding cloth and with or without inner lining. As for the fabric F-C (including the spandex, thicker and weightier than the other two fabrics), front width shrunk by 4.6%, which showed the biggest shrinkage among the jackets made of test fabrics. Then it suggested design methods of circular knitted jacket patterns to which dimensional change is applied according to materials, and analyzed the amount of fabric required for production by comparison of the materials. When using the fabric F-C without inner lining, there is big dimensional change and more than double amount of fabric is required. It is expected that the research results will be a basic data for pattern design and production process of circular knitted clothing.

• Fashion & Textile Research Journal
• /
• v.5 no.3
• /
• pp.260-266
• /
• 2003

The objective of this study is to compare the general body measurements and shoulder shapes of Korean and American elderly women to supply basic data for the apparel design. The anthropometrics data was collected including both direct and indirect measurements of 283 women over the age of 55 in Korean and the American women. The statistical methods used for the analysis of measurement data are the T-test, Exploratory data analysis, ANOVA and Duncan-test respectively. The results of the T-test indicated that there is a significant difference in the 14 body measurement items except of waist circumference. The results of exploratory data analysis, an independent relationship between shoulder slope angle and forward shoulder roll of Korean women. On the other hand, there is a dependent relationship that the bigger shoulder slope and forward shoulder roll with wide cross back shoulder of American women. Comparison of mean among the three different age groups, aged 55~59 group shows significant differences in the value of difference between cross back shoulders and horizontal shoulder width. This finding indicates that the wide and forward roll shoulder needs to special pattern making like ease amount and curvature for fit and comfort for women's apparel.

• Journal of Fashion Business
• /
• v.16 no.6
• /
• pp.160-173
• /
• 2012

This study is meaningful in that it builds the basic data necessary for developing skinny jeans for Korean women in their 20s based on the level of satisfaction with the apparel fit by body parts and brand choices gathered from studies on the skinny jeans consumption pattern among students in their 20s and on the results of the movement functionality and appearance sensory tests conducted on skinny jeans from six labels with the highest market share, popularity, and brand recognition, with the goal of developing skinny jeans for Korean women in their 20s.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.15-26
• /
• 2013

The purpose of this study is to offer basic data for designing and making of brassiere with the consideration of the physiological nature of man. Each of 3/4-cup wired upward-support-type Mold Bra of 75 size with basic pad made at three representative domestic companies (A, B and C Company) was selected for analysis of pattern and components. The following is the result of this study. 1. That Company A's bra had the highest cup, relatively narrow width, the widest front-center and the highest front center at front pad. That of Company B had relatively short wing over the base and much difference at the height of cup depending on the presence of wire. That of Company C had low and wide cup, the widest bust span and the front center width, the front center height of front pad, the base length of front pad and the length of wings were observed to be of the figures between those of Company A and B. 2. The Bra of Company A had the biggest front center angle of $6^{\circ}$, while that of Company C had the biggest wing angle of $18^{\circ}$. The Bra of Company B showed the biggest difference of patterns depending on the presence of wire. Those of Company A and C showed very similar shape when wire was inserted. 3. The order of making brassiere is following: making of exterior mold cup${\rightarrow}$ sewing exterior cup and circumference of mold${\rightarrow}$ sewing base and wings${\rightarrow}$ sewing binding tape to base${\rightarrow}$ sewing cup and main pad${\rightarrow}$ sewing binding tape to upper sides and upper part of wings${\rightarrow}$ sewing wire-tape to interior base of cup${\rightarrow}$ inserting of wire inside wire-tape${\rightarrow}$ sewing hook & eye on the back of wings${\rightarrow}$ sewing shoulder string.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.6
• /
• pp.955-968
• /
• 2010

Three-dimensional body data has been used in many industry fields including the apparel industry. This research used data from a study of the changes in lower body girth measurements from a 3D scan study of 25 female subjects aged 18 to 24 in four postures; a standing posture, a $120^{\circ}$ knee bend posture, a one pace stepping posture, and a sitting posture with a $90^{\circ}$ knee bend. We used the information on the difference between standing and seated measurements to adjust ease values for pants patterns an evaluation of the appearance, and the comfort of the pants. Waist girth in the sitting posture increased 8% compared to a standing posture and the hip girth measurement increased 7%. A basic pants pattern (pants A) with 2.4cm ease at the waist and 2.6cm ease at the hip was developed and a pants pattern (pants B) was developed using the rates of lower body girth change with a 5.7cm ease (8% change) at the waist and 7cm ease (7% change) at the hip. The appearance assessment items of pants A in a standing posture were higher than pants B. On the other hand, most appearance assessment items of pants B in a sitting posture were higher than pants A, especially the ease of pants back waistline and the appearance of the whole back. Comfort assessment items of pants B in both standing and sitting postures were higher than the comfort assessment items for pants A, especially the location of pants waistline, the ease of pants at the waistline, and the ease at the abdomen. In order to find the best level of ease for better appearance and comfort in both standing and sitting postures, 20 pants were constructed with ease values at the waist and hip in increments of 1.1cm in the range between the ease values of pants A and pants B. A fit test was conducted to compare the average appearance and comfort ratings that identified the pants with the best ease values at the waist and hip. The highest total mean was achieved in the pants with a waist ease of 4.6cm and hip ease of 4.8cm.

• The Research Journal of the Costume Culture
• /
• v.21 no.2
• /
• pp.183-194
• /
• 2013

In recent years, intense cold spells caused by climate change have encouraged an increasing number of people to wear a variety of padded jackets. In this context, this paper aims to address the production of padded jackets in casual brands and to develop basic patterns for well-fitted padded jackets targeted toward women in their 20s. The study centered on the production of padded jackets from 13 apparel companies. In addition, three sample jackets were created with 3oz. fill in the body and 2oz. fill in the sleeves, and they were subjected to a wearing test to determine their movement functionality. The research findings were as follows. Woven jackets constituted 53.4% of the winter jackets produced by casual brands; padded jackets accounted for 25.3%, leather jackets 12.6%, and other jackets 8.7%. Thus, data showed that padded jackets accounted for a considerable proportion of overall winter jacket production. Based on the wearing test results, the basic measurements of a padded jacket for women in their 20s were as follows: bust girth of B/4+3cm front length and B/4+3.5cm back length; waist girth of W/4+3.1 cm front length and W/4+1.9cm back length; and hip girth of H/4+3.3cm front length and H/4+2.8cm back length. The jacket length was set at 62.8cm, with a 63.8cm sleeve length. This study concluded that providing padded jacket manufacturers with basic pattern designs for a well-fitted jacket is expected to boost the efficiency of pattern design processes and the production of padded jackets.

• Journal of the Korean Home Economics Association
• /
• v.40 no.11
• /
• pp.1-9
• /
• 2002

Nowadays, the use of apparel CAD system is important to the mass production of ready to wear Especially, computer-based grading is the most important process to improve the fitness of clothes and to reduce the time needed to make patterns of several sizes. The purpose of this study was to suggest a standard sizing system for junior-high school girls' lower clothes and to suggest a grading method according to the sizing systems. The subjects were 402 junior-high school girls of 13 to 15 year's-old. The size intervals of waist girth and hip girth were 3㎝ and 4㎝ respectively. The sizing system, which had frequencies more than 4.5%, was classified 8 cases. For regular grading, two types of group were classified into 58-82/61-86/64-90/67-94 and 61-82/64-86/67-90/70-94. Among them, 61-86 and 64-86 size were adopted the basic size for the development of grading. According to the sizing system, hand-made patterns were manufactured. By measure of the each part of the slacks, new grading rule patterns were developed by each size. A new grading rule was different from the Moonwha grading rule. This result will contribute to clothing fitness of consumer and the amount of production.

• Journal of the Korean Society of Costume
• /
• v.63 no.1
• /
• pp.135-146
• /
• 2013

The purpose of this study is to investigate the meaning and possible shape of Goryeo-Achungunsura-jisun(高麗鴉靑雲袖羅質孫) through the details regarding its color, fabric, and pattern in the $13-14^{th}$ century writings and costume relics. Goryeo-Achungunsura-jisun was the summer dress coat that government officials wore during the Jisun feast of Yuan, and it was symbolic of the political strategy of Yuan as well as the excellent Goryeo fabric material, but no relics remain. During this period, Achung (dark blue)was the color that was used to dye silk, dress coats of upper class men, and background fabric of the embroidered official patch. And, the term, Yunsu (cloud sleeves), was probably sleeves with cloud pattern. The most typical cloud pattern in the 13 and the $14^{th}$ century was the 'flowing, gathering-headed cloud'. The Ra(silk gauze) weaving technique of Goryeo was developed rapidly in the $12^{th}$ century, and the quality of the Ra in the late Goryeo was good enough to be used for making the official's dress coat in the golden age of Yuan. According to the characteristic of jisun and man's formal-suit style in the Mongolian-Yuan, the possible styles for Goryeo-Achungunsura-jisun can be summarized as follows: a basic Mongolian gown with narrow sleeves and deep crossed diagonal opening, a Mongolian gown with waist pleats, the combination of half sleeved gown and long sleeved Mongolian gown. These styles would be made of delicate Goryeo Ra, cloud patterned sleeves, fabrics dyed in dark blue color, and shawl or embroidered patch ornaments for officials of Yuan, which was more simple than materials for Khan's Jisun to avoid rebellions.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.2
• /
• pp.19-28
• /
• 2020

This study investigated the annual frequency and clothing type by extracting puff sleeves designs from overseas fashion collections from S/S and F/W 2017 to S/S and F/W 2019. Specifically, it analyzed production characteristics and pattern methods by the type of puff sleeve design, and found the following: In terms of the percentage of puff sleeves by season, S/S 2019 was the highest. Since Newtro, with a 1990s sensitivity, was the mainstream trend during the S/S 2019, power puff sleeves, a signature of the Newtro style, accounted for the greatest portion of this design feature. In terms of the type of clothes with puff sleeves, 'dress' (54.3%) was the highest, followed by 'shirts/blouse' (27.5%), 'jacket/coat' (12.5%), and 'padded coat/jacket' (5.7%). Specifically, puff sleeve patterns were found mostly in the 'dress' category, more than 47% every season, while the figures were more than 23%, 9.3%, and 2.6% in 'shirts/blouse', 'jacket/coat' and 'padded coat/jacket', respectively. In other words, puff sleeve designs were more common in 'dress' or 'shirts/blouse' than in a 'padded coat/jacket'. In general, the shoulder length is reduced to prevent the shoulders from looking broader because of puffs. In contrast, recent puff-sleeve styles differ from those introduced by modern fashion designers in that they have drop shoulders with puffs attached. Furthermore, as constructive and over-exaggerated sleeve patterns appeared, puffs were applied to diverse sleeve styles including mutton leg and Mameluke styles. The analysis results of this study will contribute to the development of the fashion industry through small quantity batch production pursuing unique styles and serve as the basis for further studies on the configuration methods of puff sleeves. This study will be used in various ways, including as educational material on sleeve patterns. Through the analysis of sleeve patterns, this study tries to provide basic data for planning the design of puff sleeves and helping to diversify the ladies' apparel market in the future.