• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.5
• /
• pp.451-458
• /
• 2016

Urban railway can be divided into ground and underground sections. In particular, the center of the metropolitan has been built mostly underground stations and tunnels. Underground section is difficult to measure the position because GPS signal is unavailable, so it is necessary to apply the indoor positioning technology. For this purpose, we analyzed the positioning technologies which are based on Wi-Fi and mobile base stations. The positing technology for smart phone which uses mobile base station' information is developed in the underground area of urban railway where the core technique is to implement base station ID into the positing technology by considering hand-off point.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.3
• /
• pp.814-836
• /
• 2021

Wildlife ecologists and biologists recapture deer to collect tracking data from deer collars or wait for a drop-off of a deer collar construction that is automatically detached and disconnected. The research teams need to manage a base camp with medical trailers, helicopters, and airplanes to capture deer or wait for several months until the deer collar drops off of the deer's neck. We propose an intelligent robust base-station research with a low-cost and time saving method to obtain recording sensor data from their collars to a listener node, and readings are obtained without opening the weatherproof deer collar. We successfully designed the and implemented a robust base station system for automatically collecting data of the collars and listener motes in harsh wilderness environments. Intelligent solutions were also analyzed for improved data collections and pattern predictions with drone-based detection and tracking algorithms.

• Journal of Internet Computing and Services
• /
• v.19 no.2
• /
• pp.9-15
• /
• 2018

This paper proposes an energy efficient adaptive relay station ON/OFF scheme with different frequency reuse factors (FRFs) to enhance the system throughput and reduce the transmission energy consumption for the transparent mode of 2-hop cellular relay networks (CRNs) based on orthogonal frequency division multiple access and time division duplex. In the proposed scheme, the base station turns on or off the relay stations (RSs) when they are overutilized and undertuilized based on the traffic density of the cell coverage, respectively. Through the simulation results, we show that the proposed scheme outperforms the conventional CRN in terms of the energy consumption with the same system throughput. Further, in order to increase the system throughput with low energy consumption, the best way is FRF 1 when the number of operating RSs is up to 4 and FRF 2 otherwise.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.588-600
• /
• 2017

We develop a wireless, contact free power transfer mechanism that is safer than the direct metallic contact and robust to imperfect alignment on landing at the base station. A magnetic field is created using inductors on both the transmitting and receiving sides. We use the inductive wireless recharging to increase autonomy and decrease the sensor interference by reducing the inductor loop size. By locating four independent small receiver loops and corresponding four circuits around the quadrotor UAV, we can increase safety from circuit malfunctions in comparison to the use of just one loop. On the base station, four folding robotic bars are used to realign the receiver loops over the transmitter loops. After adequate recharging as measured by battery voltages or power consumption at the bae station, the UAV sends a signal to the base station to open the robotic bars and takes off once freed from the robotic bars.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.613-620
• /
• 2004

Traditionally, simulation method was used to test and evaluate the performance of communication protocol or functional elements for mobile communication service. In this Paper, PCSsim(Personal Communication System Simulator) was realized that can evaluate and review the call process of mobile communication service or to predict its performance by using the object-oriented simulation platform. PCSsim can simulate the base station and mobile host by considering the user's mobility, call generation rate and call duration time. In this paper, based on the simulation, presented the simulation results of hand-off generation ratio according to call generation, user's moving speed and call duration time both in residence area and commercial area, and it was confirmed that the hand-off rates in simulation and actual service environment have similar features. PCSsim can be used in adjusting the characteristics of base station fellowing the dynamic hand-off buffering or the characteristics of user's call in the design stage, and also can be used in building new mobile communication network by reflecting the characteristics of region where the base station is located and the mobility of the user.

• Journal of Korea Multimedia Society
• /
• v.2 no.1
• /
• pp.59-68
• /
• 1999

Multimedia applications have an ability to transmit a lot of data in real time. In mobile circumstances the replay of continuous multimedia data in real time causes frequent replay breaks and poor service quality because of low transmission speed and new transmission path settings in hand-off. To avoid these unfavorable side effects, we need a new mechanism which can transmit data efficiently between base station and mobile hosts, to control the buffers of mobile hosts, and to switch to a new transmission path rapidly in hand-off. The study is to propose how to give good service to mobile hosts during hand-off and the mechanism which can increase the number of mobile hosts in the cell unit.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.450-459
• /
• 2015

Small cell networks, as an important evolution path for next-generation cellular networks, have drawn much attention. Different from the traditional base stations (BSs) always-on model, we proposed a BSs on-off model, where a new, simple expression for the probabilities of active BSs in a heterogeneous network is derived. This model is more suitable for application in practical networks. Based on this, we develop an analytical framework for the performance evaluation of small cell networks, adopting stochastic geometry theory. We derive the system coverage probability; average energy efficiency (AEE) and average uplink power consumption (AUPC) for different association strategies; maximum biased received power (MaBRP); and minimum association distance (MiAD). It is analytically shown that MaBRP is beneficial for coverage but will have some loss in energy saving. On the contrary, MiAD is not advocated from the point of coverage but is more energy efficient. The simulation results show that the use of range expansion in MaBRP helps to save energy but that this is not so in MiAD. Furthermore, we can achieve an optimal AEE by establishing an appropriate density of small cells.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.1
• /
• pp.17-29
• /
• 1993

The new flexible controlling method integrated with some existing maneuvers of reducing a great head way during approaching a pilot station or anchor berth, namely , Super Rudder (Woo) controlling method originally was developed. The conclusions of this paper are drawn. 1) Super Rudder (Woo) controlling method has the shortest distance along base course and distance off base course among all reducing maneuvers including Rudder Cycling. 2) This new method is flexibly adjustable to a range of yaw angles 5-35 degrees either ship's side depending on traffic situations, 3) This new method is versatile controlling maneuver enabling shipandlers to reduce or stop a ship's headway and to adjust the proper courses to a pilot station or anchor berth.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.81-88
• /
• 2004

In case of mechanical down tilting, a horizontal pattern is distorted and beam width widens whenincreasing tilt angle, which causes an expansion of hand off region and burden base station equipment. In contrast, electrical down tilting has advantage that horizontal HPBW is kept constant with down tilting. In this paper, based on a phased array technology, dual polarized base station antenna with electrical down tilting was developed at 800MHz band. The antenna has down tilting range of 0$^{\circ}$ to 14$^{\circ}$, and 15㏈i gain. We use stacked microstrip patch as a radiated element and apply balanced feed technique to improve isolation between ports and discrimination of cross polarization. The effect of electrical down tilting was verified by field test.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.731-734
• /
• 2011

This paper proposed the Low power configuration of Single hop WSN(Wireless Sensor Network) system. When the RF communication is done each tag node during the WSN systems operating, power consumption is greatest. There for, if you configure the Network with the RF communication module turn on/off periodically, power consumption less then operating the module all the time without it toggles. However, some data omissions may occur in which transmission and receipt is done. So this paper proposed the algorithm for low power system without data omissions.