• Steel and Composite Structures
• /
• 제32권4호
• /
• pp.497-507
• /
• 2019

Exposed column base connections are used in low- to mid-rise steel moment resisting frames. This paper is to investigate the effect of the base plate thickness on the exposed column base connection strength, stiffness, and energy dissipation. Five specimens with different base plate thickness were numerically modelled using ABAQUS software. The numerical model is able to reproduce the key characteristics of the experimental response. Based on the numerical analysis, the critical base plate thickness to identify the base plate and anchor rod yield mechanism is proposed. For the connection with base plate yield mechanism, the resisting moment is carried by the flexural bending of the base plate. Yield lines in the base plate on the tension side and compression side are illustrated, respectively. This type of connection exhibits a relatively large energy dissipation. For the connection with anchor rod yield mechanism, the moment is resisted through a combination of bearing stresses of concrete foundation on the compression side and tensile forces in the anchor rods on the tension side. This type of connection exhibits self-centering behavior and shows higher initial stiffness and bending strength. In addition, the methods to predict the moment resistance of the connection with different yield mechanisms are presented. And the evaluated moment resistances agree well with the values obtained from the FEM model.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.13-18
• /
• 2003

This study was done in an effort to evaluate the possibility of recyclability of moisture-proof paper. Because it is difficult to recycle laminated moisture-proof paper, a mixture of styrene-butadiene latex(SB latex) and wax emulsion was used as moisture-proof paper chemicals. A bar coater was applied to make moisture-proof paper and the coated weight was 17 g/$m^2$. The mixing ratios of SB latex to wax emulsion were 85 : 15, 87 : 13, and 90 : 10, respectively. It was observed that the moisture-proof paper treated with SB latex and wax emulsion at the appropriate ratio could be recycled effectively. The moisture-proof paper was similar to base paper in degree of pulping, and there was no significant difference in dispersion between moisture-proof paper and base paper. Most of wax particle which caused the spots during drying process could be removed by flotation process. Tensile strength and tear strength of handsheets made of both moisture-proof paper and base paper after pulping was measured to examine the fiber bonding and no significant difference in mechanical properties was observed.

• Journal of Platform Technology
• /
• 제6권1호
• /
• pp.24-30
• /
• 2018

LMT 는 10 가지 풍경요소 그림을 이용하여 내담자의 심리 상태를 분석하는 그림 검사기법이다. 본 논문에서는 LMT 그림 분석에 필요한 지식 베이스를 구축한다. 이를 기반으로 그림 검사 후 내담자에게 제공되는 평가 보고서를 생성하는 LMT 그림 진단지원 시스템을 제안하고, 구현한다. 이 시스템은 각종 문헌 및 연구 결과를 기반으로 진단 결과를 생성하기 때문에 진단 결과의 객관성을 제고한다. 또한, 향후 LMT 그림분석에 대한 지식을 지식 베이스에 축적할 수 있어 지속적으로 확장이 가능하다. 본 시스템은 웹 기반으로 서비스할 수 있도록 구현되었으며, 실제 사례를 이용하여 지원 시스템의 효과성을 보였다.

• 한국정보처리학회논문지
• /
• 제7권1호
• /
• pp.88-98
• /
• 2000

협력적 질의 응답은 질의와 데이터에 관한 지식을 이용해서 초기의 질의에 적절한 인접한 정보나 연관된 정보를 제공한다. 본 논문에서는 제시된 질의에 대한 정확한 검색 결과를 보여주지 못하는 경우에 협력적 질의 응답을 지원하기 위하여 지능적인 질의 응답 시스템을 제안한다. 본 논문에서 제안한 지능적인 질의 응답 시스템은 하이브리드 지식베이스(Hybrid Knowledge Base)를 이용하여 질의 완화 과정을 수행한다. 질의 완화에 사용되는 하이브리드 지식베이스는 구조적인 접근을 위하여 시멘틱 리스트와 규칙 기반의 지식베이스로 구성된다. 또한, 본 논문은 하이브리드 지식베이스를 기반으로 초기의 질의어를 이용하여 질의 재형성을 하기 위하여 질의 완화 알고리즘을 제안한다.

• International Journal of Control, Automation, and Systems
• /
• 제6권5호
• /
• pp.677-688
• /
• 2008

In this paper, the general problem of impedance control for a robotic manipulator with a moving flexible base is addressed. Impedance control imposes a relation between force and displacement at the contact point with the environment. The concept of impedance control of flexible base mobile manipulator is rather new and is being considered for first time using singular perturbation and new sliding mode control methods by authors. Initially slow and fast dynamics of robot are decoupled using singular perturbation method. Slow dynamics represents the dynamics of the manipulator with rigid base. Fast dynamics is the equivalent effect of the flexibility in the base. Then, using sliding mode control method, an impedance control law is derived for the slow dynamics. The asymptotic stability of the overall system is guaranteed using a combined control law comprising the impedance control law and a feedback control law for the fast dynamics. As first time, base flexibility was analyzed accurately in this paper for flexible base moving manipulator (FBMM). General dynamic decoupling, whole system stability guarantee and new composed robust control method were proposed. This proposed Sliding Mode Impedance Control Method (SMIC) was simulated for two FBMM models. First model is a simple FBMM composed of a 2 DOFs planar manipulator and a single DOF moving base with flexibility in between. Second FBMM model is a complete advanced 10 DOF FBMM composed of a 4 DOF manipulator and a 6 DOF moving base with flexibility. This controller provides desired position/force control accurately with satisfactory damped vibrations especially at the point of contact. This is the first time that SMIC was addressed for FBMM.

• 한국경영과학회지
• /
• 제30권4호
• /
• pp.71-81
• /
• 2005

This Paper focuses on the effects of outside competition on an optimal echelon base stock level in a two stage supply chain. This is new in that we have been studying the effects of inside competition within a supply chain up to now. It is known that the optimal echelon base stock level with inside competition within a supply chain is less than the global optimal echelon base stock level without inside competition. This is due to the ' public goods ' nature of inventory. That is, more inventory is better, but one wants the other to invest more, thus resulting in under-investment. However, this phenomenon becomes weaker as outside competition increases. We show that as outside competition becomes stronger, the ' public goods ' effects decrease and the optimal echelon base stock level increases. If the level of competition is sufficiently high, the optimal echelon base stock level goes even higher than the global optimal echelon base stock level. We develop a theoretical model for the analysis and conduct a numerical analysis.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.586-594
• /
• 1999

To limit both the large displacement and acceleration response of the structure efficiently, the relationships between acceleration and displacement responses of the structure under several earthquakes are investigated for various horizontal stiffness of the base isolation system to determine the effective stiffness of the base isolation system in this paper. An example structure is a five-storey steel frame building as the primary structure and the secondary structures are assumed to be located on the fifth floor of the primary structure. Input motions used in the structural analysis are El Centre 1940, Taft 1952, Mexico 1985, San Fernando 1971 Pacoima Dam, and artificially generated earthquakes. The relationships of the absolute peak acceleration and the displacement at the top of the structure are calculated for various natural periods of base isolators under various earthquakes. The peak acceleration response of the fifth floor in the base isolated structure is significantly reduced by a factor of 2.1 through 6.25. Also, the relative displacement response of the floor to the base of the superstructure is very small. The results of this study can be utilized to determine the effective stiffness of the base isolation system.

• 펄프종이기술
• /
• 제39권5호
• /
• pp.32-38
• /
• 2007

The purpose of this study is to investigate the cause of fine wrinkles occurred in silky wallpaper and its solution. The characteristics of base papers, wallpapers and adhesives (conventional and modified) were evaluated to find the possibility for the occurrence of fine wrinkles. It was found that the base papers and wallpapers did not cause the occurrence of silky wallpaper. It was concluded that the fine wrinkles in silky wallpaper was caused by the nonuniform distribution of adhesive, the localized shrinkage of adhesive and the breaking the balance between the resistance of wallpaper and shrinkage of adhesive. Three possible solutions for the prevention of the occurrence of fine wrinkles in silky paper were recommended.

• 산업공학
• /
• 제3권1호
• /
• pp.31-38
• /
• 1990

This paper deals with two topics which are vital in fuzzy expert systems; one is how to build fuzzy knowledge base by fuzzy expertise modeling for representing knowledge with imprecise characteristic and the other is how to draw an inference from fuzzy knowledge base using translating rules. The result of this study provides the basic principle for constructing the fuzzy knowledge base and the fuzzy inference system.

• 한국지능시스템학회논문지
• /
• 제12권1호
• /
• pp.85-89
• /
• 2002

In this paper, we introduce the notion of fuzzy regular spaces over a base space and investigate some properties of these spaces.