• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.690-695
• /
• 2006

This study was carried out to develop a system for forest resources inventory using PDA. The Forest Inventory Software running on PDA was developed based on a Forest Resources Inventory Method by Korea Forestry Service and 4th National Forest Inventory Method. The forest inventory data stored in PDA contains sea level and GPS positioning data. Forest inventory input items are 34 tree species, 18 diameter class by each tree species, number of trees, tree height per each diameter class, thickness of bark, and annual growth of tree. Application test of the software with the forest workers shorted that, hours of forest works were remarkably reduced. It is possible to do forest inventory effectively using Forest Inventory Software developed by this study. Therefore, investigation and management expenses can be reduced and labor productivity will be improved.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.39-48
• /
• 1993

End-matched disks of 7.7cm thickness were part-time dried in vacuum press dryer to investigate the drying characteristics by using drying schedules and end treatments. The ginkgo disks could be dried faster with severer end checks and ring failures by C schedule than by S schedule. There were no significant differences in drying rates and amounts of end checks, ring failures and V-shaped checks occurred between ginkgo disks end-taped with Korean traditional paper (KTP) and those untreated. The drying time of walnut disks was slightly reduced by end-taping with KTP. And the length of end checks and V-shaped checks and the frequency of defected disk were decreased more effectively than those untreated. The tangential strains and tangential drying stresses near bark sides of ginkgo and walnut disk untreated were developed in the early stage of drying and incresed slightly curvi-linearly above fiber saturation point (fsp) and more curvi-linearly below fsp. The influence of end-taping with KTP on the drying rate for impermeable walnut disk was stronger than that for permeable ginkgo disk.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.3
• /
• pp.253-264
• /
• 2019

This study characterized the chemical compounds in tannin from mangium (Acacia mangium) bark extract and determined the physical-mechanical properties of glued laminated timber (glulam) made from sengon (Falcataria moluccana), jabon (Anthocephalus cadamba), and mangium wood. The adhesives used to prepare the glulam were based on mangium tannin and phenol resorcinol formaldehyde resin. Five-layer glulam beams measuring $5cm{\times}6cm{\times}120cm$ in thickness, width, and length, respectively, were made with a glue spread of $280g/m^2$ for each glue line, cold pressing at $10.5kgf/cm^2$ for 4 h and clamping for 20 h. Condensed mangium tannin consisted of 49.08% phenolic compounds with an average molecular weight of 4745. The degree of crystallinity was 14.8%. The Stiasny number was 47.22%. The density and the moisture content of the glulams differed from those of the corresponding solid woods with mangium having the lowest moisture content (9.58%) and the highest density ($0.66g/cm^3$). The modulus of rupture for all glulam beams met the JAS 234-2003 standard but the modulus of elasticity and the shear strength values did not. Glulam beams made with tannin had high delamination under dry and wet conditions, but glulam made from sengon and jabon wood met the standard's requirements. All glulam beams had low formaldehyde emissions and were classified as $F^{****}$ for formaldehyde emissions according to the JAS 234 (2003) standard.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.23-30
• /
• 1999

This study was carried out to develop the Korean paper(Hanji) sludge-wood fiber composite boards utilizing the relinquished sludges occurring from the making process of Korean classic paper Hanji. The bark of paper mulberry(Broussonetia kazinoki Sieb.) has been used as a raw material since past hundreds and thousands years. Korean paper(Hanji) sludge was divided into two kinds, the one was the white sludge from the first stage and the other was the black sludge occurring from the final stage of Korean paper(Hanji) making. Four levels of the mixed ratio of each white or black sludge to wood fiber(10:90, 20:80, 30:70 and 40:60), three levels of the resin adhesives(PMDI, urea and phenol resin) and three levels of the density(0.60, 0.75 and 0.90) were designed to investigate the physical properties of Korean paper(Hanji) sludge-wood fiber composite boards. From the results and discussion, it could be concluded as follows : 1. In the white sludge-wood fiber composite board, the thickness swelling was not affected by the specific gravity and sludge additive of composite boards, but among the resin adhesives PMDI resin showed the best dimensional stability. Water absorption was superior in urea resin, secondly PMDI resin and very poor in phenol resin. 2. In the black sludge-wood fiber composite board, thickness swelling was superior in PMDI resin but very poor in phenol resin. In water absorption, PMDI and urea resin showed good results, regardless of specific gravity or sludge additive, but phenol resin showed poor results. 3. From the results and discussion of physical properties it is suggested that the white sludge-wood fiber composite boards bonded with PMDI or black sludge-wood fiber composite boards bonded with urea resin were made possibly with similar or better properties. compared with general fiberboard until the addition of 20% sludge into wood fiber.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.243-280
• /
• 2006

At the Bujang-ri Site, Seosan, South Chungcheong Province, around 220 archaeological features, including semi-subterranean houses and pits of Bronze Age and semi-subterranean houses, pits, and burials of Baekje period had been identified and investigated. In Particular, mound burials No. 5 of 13 of Baekje mound burials yielding a gilt-bronze cap along with other valuable artifacts drew international scholarly attention. The gilt-bronze cap from the mound burial No. 5 is a significant archaeological data not only in the study of Baekje archaeology but also in the study of international affairs and exchange at that time. At the time of exposure, the gilt-bronze cap was already broken into a number of pieces and seriously damaged by corrosion, and hardening and urethane foam were necessary in the process of collecting its pieces. Ahead of main conservational treatments on cap, X-ray photograph and CT(computerizes tomography) were taken in order to examine interior structure of the cap and to decide appropriate treatments. In the five layers identified in the profile of cap, a textile layer was set between a metal and a layerof bark of paper birch for avoiding direct contact of the metal and the bark of paper birch. Analyses were executed for examining textile layer and a layer of fibroid material. According to microscopic analysis, while the textile layer consisted of the simplest plain fabric with one fold among three kinds of textile structures, the layer of fibroid material was mixed with two or three kinds of fibers. A comparative analysis with standard sample using FT-IR (Fourier Transform Infrared Spectroscopy) announced that both textiles and fabrics were hemp. Analysis of kind of the paper birch resulted in barks of paper birch with 15 fold. A metallographic microscope, SEM, and WDS were used for the analysis of microscopic structures of plated metal pieces. While amalgam plating was treated as a plating method, the thickness of the plated layer, a barometer of plating technique, was ranged from $1.72{\mu}m$ to $8.67{\mu}m$. The degree of purity of gold (Au) used in plating was 98% in average, and less than 1% of silver (Ag) was included.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.4 s.48
• /
• pp.509-514
• /
• 2004

The fruit or root of Ulmus davidiana var. Japonica and its extract has traditionally been used as anti inflammatation medicines as well as a remedy of the digestive ulcer for a long time. Ulmus davidiana var. Japonica has also been used to cure palliative and diuresis, because it contains lot of mucus and tannin. In this study, we examined the moisturizing effect and anti-inflammation effect of polysaccharides extracted from Ulmus davidiana var. Japonica to investigated whether it can be used as a cosmetic ingredient or not. The polysaccharides were extracted from Ulmus davidiana var. Japonica. Then the hydrolyzed was obtained through the hydrolysis. It has been ascertained that the polysaccharides we mainly composed of rhamnose, galactose, and glucose through HPLC experiments, and it has 20,000 of the molecular weight and 89.3 dL/g of intrinsic viscosity In a moisturizing test of measuring water loss in a desiccator and moisture content by Comeometer CM820, Ulmus davidiana root extract showed a similar moisturizing effect as hyaluronic acid. And its anti-inflammation effect on carrageenin-induced edema evaluated by measuring the thickness of swelling over paw induced by carrageenin (25 uL of $2\%$ carrageenin saline injection), the $\%$ swelling over paw treated with Ulmus davidiana root extract was much less than that of paw treated with carrageenin only. The anti-inflammatory effect of Ulmus davidiana root extract was almost similar to that of ketoprofen. These results can say that Ulmus davidiana root extract can be effectively used as a cosmetic ingredient.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.360-360
• /
• 2017

Morphological characteristics indicating agronomic features and yield components (trunk length, trunk diameter, thickness of bark, pith density, dry-matter percentage of pith and starch concentration in pith) of sago palms (Metroxylon sagu Rottbøll) were compared between the 27 populations grown in the islands in Southeast Asia (West Sumatra, South Sumatra, West Java, Southeast Sulawesi, Ternate, Halmahera and Seram in Indonesia) and the 20 populations grown in Melanesia (West Papua in Indonesia, East Sepik and New Ireland island in Papua New Guinea). The average starch yield calculated based on the yield components was $310kg\;plant^{-1}$ and $244kg\;plant^{-1}$ in the islands in Southeast and Melanesia, respectively. The variation of starch yield in Melanesia (CV: about 80%) was larger than that in the islands in Southeast Asia (CV: about 60%). The difference in starch yield in the islands in Southeast Asia was mainly attributed to the trunk diameter breast height and the dry-matter percentage of pith. In contrast, the differences in trunk length and dry-matter percentage of pith mainly accounted for the difference in starch yield in Melanesia. The sago palms in the islands in Southeast Asia had a comparatively thick and short trunk and those in Melanesia had a comparatively thinner and longer trunk. However, the average pith dry-matter yield was almost same level as $400kg\;plant^{-1}$ in both the islands in Southeast Asia and Melanesia. The difference in starch yield between the two areas was attributed to the difference in starch concentration in pith, 77% and 58% in the islands in Southeast Asia and Melanesia, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.3
• /
• pp.3-15
• /
• 1986

This study was carried out to investigate the drying rate and drying defects of Populus euramericana using the SDR (Saw-Dry-Rip) process. Flitches for SDR process were rough edged for compact kiln stacking, and then kiln-dried to 10 percent moisture content with dimensions in the same run, using the kiln-drying schedule ($T_8-F_4$) recommended by Rasmussen. The results obtained were as follows: 1. Drying rate of dimensions was slower than that of flitches. 2. Final moisture content and moisture distribution of dimensions were lower than those of flitches. 3. Average bowing, cupping, crooking, and twisting were reduced 20 percent, 25 percent, 54.9 percent, and 13.4 percent by SDR process respectively. 4. Bowing and cupping were more severe in dimensions from the area near the pith than in those from the area near the bark, and for crooking and twisting the reverse was true. 5. Surface checking of dimensions developed less than that of flitches and end checking of dimensions was similar to that of flitches. 6. Honeycomb, thickness shrinkage, and collapse of dimensions were similar to those of flitches. 7. The degree of casehardening of dimensions was higher than that of flitches.

• Journal of Korean Society of Forest Science
• /
• v.14 no.1
• /
• pp.33-38
• /
• 1972

This study was carried out to investigate on the variation of wood fiber dimensions of some oakwoods. Every 2 annual ring was selected for specimens from pith toward bark up to 28th annual ring on 3 species of Oak SINGALNAMOO(Quercus mongorica Fisch.), JOLCHAMNAMOO(Quercus serrata Thunb.) and KULCHAMNAMOO(Quercus variabilis Blume) which grew in Mt. Jiri. The investgated results are as follows: 1. Values of wood fiber lengths increase rapidly up to 16th annual ring, however, considerably stable at the rear part. Range of wood fiber length variations: Species Range of length(mean) CV SINGALNAMOO, $640{\sim}1,544{\mu}$($1,142.3{\mu}$), 8~16% JOLCHAMNAMOO, $592{\sim}1,600{\mu}$($1,179.6{\mu}$), 6~21% KULCHAMNAMOO, $679{\sim}1,592{\mu}$($1,298.9{\mu}$), 2~15% 2. The increment of wood fiber width and thickness by annual rings shows quite inactive contrary to the length. Range of wood fiber width: $7.6{\sim}10.0{\mu}$(mean $9.3{\mu}$) Range of wood fiber thickness: $2.0{\sim}3.2{\mu}$(mean $2.6{\mu}$) 3. There was no significance between species through their wood fiber lengths. 4. And these wood fibers believed to be valuable for pulp-wood through their fiber bonding ratio, Runkel ratio and flexibility coefficient.

• Microbiology and Biotechnology Letters
• /
• v.43 no.1
• /
• pp.45-55
• /
• 2015

This study was carried out to demonstrate the anti-inflammatory effect of tuna oil (TO) using LPS-induced inflammation responses and mouse models. First, nitric oxide (NO) and pro-inflammatory cytokines levels were suppressed up to 50% with increasing concentrations of TO without causing any cytotoxicity. Also, the expression of a variety of proteins, such as inducible nitric oxide synthase (iNOS), cyclooxygenase-2 (COX-2) and nuclear factor kappa B (NF-κB), was suppressed in a dosedependent manner by treatment with TO. Furthermore, TO also inhibited the phosphorylation of mitogen-activated protein kinases (MAPKs), including c-Jun N-terminal kinase (JNK), extracellular signal-regulated kinase (ERK), and p38 protein kinase (p38). Moreover, in in vivo testing the formation of ear edema was reduced at the highest dose tested compared to that in the control, and a reduction of ear thickness and the number of mast cells was observed in histological analysis. In acute toxicity test, no mortalities occurred in mice administrated 5,000 mg/kg body weight of TO over a two-week observation period. Our results suggest that TO has a considerable anti-inflammatory property through the suppression of inflammatory mediator productions and that it could prove to be useful as a potential anti-inflammatory therapeutic material.