• Title/Summary/Keyword: bare

Search Result 1,491, Processing Time 0.027 seconds

Fabrication of Environmental-friendly Materials Using Atomic Layer Deposition (원자층 증착을 이용한 친환경 소재의 제조)

  • Kim, Young Dok
    • Applied Chemistry for Engineering
    • /
    • v.23 no.1
    • /
    • pp.1-7
    • /
    • 2012
  • In this article, I will introduce recent developments of environmental-friendly materials fabricated using atomic layer deposition (ALD). Advantages of ALD include fine control of the thin film thickness and formation of a homogeneous thin fim on complex-structured three-dimensional substrates. Such advantages of ALD can be exploited for fabricating environmental-friendly materials. Porous membranes such as anodic aluminum oxide (AAO) can be used as a substrate for $TiO_2$ coating with a thickness of about 10 nm, and the $TiO_2$-coated AAO can be used as filter of volatile organic compound such as toluene. The unique structural property of AAO in combination with a high adsorption capacity of amorphous $TiO_2$ can be exploited in this case. $TiO_2$ can be also deposited on nanodiamonds and Ni powder, which can be used as photocatalyst for degradation of toluene, and $CO_2$ reforming of methane catalyst, respectively. One can produce structures, in which the substrates are only partially covered by $TiO_2$ domains, and these structures turns out to be catalytically more active than bare substrates, or complete core-shell structures. We show that the ALD can be widely used not only in the semiconductor industry, but also environmental science.

Effect of Metal Interlayers on Nanocrystalline Diamond Coating over WC-Co Substrate (초경합금에 나노결정질 다이아몬드 코팅 시 금속 중간층의 효과)

  • Na, Bong-Kwon;Kang, Chan Hyoung
    • Journal of the Korean institute of surface engineering
    • /
    • v.46 no.2
    • /
    • pp.68-74
    • /
    • 2013
  • For the coating of diamond films on WC-Co tools, a buffer interlayer is needed because Co catalyzes diamond into graphite. W and Ti were chosen as candidate interlayer materials to prevent the diffusion of Co during diamond deposition. W or Ti interlayer of $1{\mu}m$ thickness was deposited on WC-Co substrate under Ar in a DC magnetron sputter. After seeding treatment of the interlayer-deposited specimens in an ultrasonic bath containing nanometer diamond powders, $2{\mu}m$ thick nanocrystalline diamond (NCD) films were deposited at $600^{\circ}C$ over the metal layers in a 2.45 GHz microwave plasma CVD system. The cross-sectional morphology of films was observed by FESEM. X-ray diffraction and visual Raman spectroscopy were used to confirm the NCD crystal structure. Micro hardness was measured by nano-indenter. The coefficient of friction (COF) was measured by tribology test using ball on disk method. After tribology test, wear tracks were examined by optical microscope and alpha step profiler. Rockwell C indentation test was performed to characterize the adhesion between films and substrate. Ti and W were found good interlayer materials to act as Co diffusion barriers and diamond nucleation layers. The COFs on NCD films with W or Ti interlayer were measured as less than 0.1 whereas that on bare WC-Co was 0.6~1.0. However, W interlayer exhibited better results than Ti in terms of the adhesion to WC-Co substrate and to NCD film. This result is believed to be due to smaller difference in the coefficients of thermal expansion of the related films in the case of W interlayer than Ti one. By varying the thickness of W interlayer as 1, 2, and $4{\mu}m$ with a fixed $2{\mu}m$ thick NCD film, no difference in COF and wear behavior but a significant change in adhesion was observed. It was shown that the thicker the interlayer, the stronger the adhesion. It is suggested that thicker W interlayer is more effective in relieving the residual stress of NCD film during cooling after deposition and results in stronger adhesion.

Corrosion Properties of Atomic Layer Deposited TiO2, Al2O3 and TiO2-Al2O3 Nanolaminated Film Coated 316L Stainless Steel (원자층 증착법에 의한 TiO2, Al2O3, 및 TiO2-Al2O3 나노라미네이트 박막이 316L Stainless Steel의 부식특성에 미치는 영향)

  • Lee, Woo-Jae;Wan, Zhixin;Kim, Da Young;Jang, Kyung Su;Choi, Hyun-Jin;Choi, Woo-Chang;Kwon, Se Hun
    • Journal of the Korean institute of surface engineering
    • /
    • v.50 no.1
    • /
    • pp.35-41
    • /
    • 2017
  • $TiO_2$, $Al_2O_3$, and $TiO_2-Al_2O_3$ nanolaminated films were grown by atomic layer deposition (ALD) on the 316L stainless steel (SS316L) substrates at a temperature of $150^{\circ}C$. The growth kinetics of $ALD-TiO_2$ and $Al_2O_3$ thin films were systematically investigated in order to precisely control the thickness of each layers in the $TiO_2-Al_2O_3$ nanolaminated films using a high-resolution transmission electron microscopy. And, the exact deposition rates of $ALD-TiO_2$ on $Al_2O_3$ surface and $ALD-Al_2O_3$ on $TiO_2$ surface were revealed to be 0.0284 nm/cycle and 0.11 nm/cycle, respectively. At given growth conditions, the microstructures of $TiO_2$, $Al_2O_3$ and $TiO_2-Al_2O_3$ nanolaminated films were amorphous. The potentiodynamic polarization test revealed that the $TiO_2-Al_2O_3$ nanolaminated film coated SS316L had a best corrosion resistance, although all ALDcoated SS316L exhibited a clear improvement of the corrosion resistance compared with a bare SS316L.

Approach for Suitable Site Selection and Analysis for Reforestation CDM using Satellite Image and Spatial Data in North Korea (위성영상과 공간자료를 이용한 북한 지역의 재조림 CDM 대상지 선정 및 적지분석 방안)

  • Yoo, Seong-Jin;Lee, Woo-Kyun;Lee, Seung-Ho;Kim, Eun-Sook;Lee, Jong-Yeol
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.19 no.3
    • /
    • pp.3-11
    • /
    • 2011
  • The objective of this study was to select appropriate sites for reforestation CDM using satellite image and spatial data in North Korea. A suitable site for reforestation CDM can be defined as non-forest area since 1990. To detect land cover change between two different years and to delineate potential reforestation CDM site(unstocked forest, converted crop land, denuded bare land), Landsat TM satellite image which was scanned in 1988 and SPOT Pan-sharpened image which was scanned in 2007 were used. As a result of classification, 1,214 ha of forest area in 1989 had been converted to other land cover types in 2007. and 2,245 ha of the total study area was detected to be suitable for reforestation CDM. 79.2% of total potential CDM sites was converted crop land. Through topography and accessibility analysis for potential reforestation CDM sites detected by satellite image, suitability index was calculated and the potential reforestation area was reclassified into suitability grades.

Ecosystem Service Valuation on Groundwater Storage Capacity by Biotope Type (지하수저류량 평가를 통한 비오톱 유형별 생태계서비스 효과 분석)

  • Kang, Deok-Ho;Park, In-Hwan;Kim, Jin-Hyo;Lee, Soon-Ju;Kwon, Oh-Sung
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.20 no.5
    • /
    • pp.1-13
    • /
    • 2017
  • Recently, due to worldwide industralization and urbanization, natural environment has been severly damaged and global warning is worsening. Heat wave, torrential rainfall, typhoon and other natural disasters continuously occur due to global warming. Policies such as carbon emission regulation are taken into effect to solve such problems. Such global trend has affected interest to natural ecosystem and developed as a concept of ecosystem-services. This study particularly focused on ground water storage capacity among various ecosystem-services such as climate control and soil formation. It is because Korea suffers from drought and flood every year. Therefore, this study aims to understand objective numerical value of ecosystem-services value regarding ground water storage capacity of biotop classes based on relationship among precipitation, amount of evapotranspiration, and runoff of 7 regions of Chilgok-gun, Gyeongsangbuk-do and to convert the value into economic value. The study calculated ground water storage capacity based on relationship among precipitation, amount of evapotranspiration, and run off. Calculated amount of each capacity was 29.26 million ton($30.2mm/m^2$), 430.46 million ton($140.4mm/m^2$), 11.30 million ton($150.1.0mm/m^2$), 33 milion ton($3.0mm/m^2$). Economical value of ecosystem-service by each biotop classes appeared 4,128,800 thousand KRW ($21.32KRW/m^2$) for agricultural biotop, and 60,403,600 thousand KRW ($98.52KRW/m^2$) for forest biotop, 1,572,800 thousand KRW ($104.4KRW/m^2$) for grassland biotop, and 47,600 thousand KRW ($2.18KRW/m^2$) for bare ground biotop. The result of this study like above, it will be used as important evidentiary material to preserve natural resource effectively from various development business and policies that damages natural eco-system. Also, it is judged that ecosystem-service value by each land coverage will be used as important material for preparing legalistic institution such as establishing natural environment preservation plan, budget for alternative forest resource creation cost.

Hydrophobic Polydimethylsiloxane Thin Films Prepared by Chemical Vapor Deposition: Application in Water Purification (화학적 증기 증착 방법을 통해 제조한 소수성 폴리디메틸실록산 박막: 수처리로의 응용)

  • Han, Sang Wook;Kim, Kwang-Dae;Kim, Ju Hwan;Uhm, Sunghyun;Kim, Young Dok
    • Applied Chemistry for Engineering
    • /
    • v.28 no.1
    • /
    • pp.1-7
    • /
    • 2017
  • Polydimethylsiloxane (PDMS) can be deposited on various substrates using chemical vapor deposition process, which results in the formation of PDMS thin films with thickness below 5 nm. PDMS layers can be evenly deposited on surfaces of nanoparticles composed of various chemical compositions such as $SiO_2$, $TiO_2$, ZnO, C, Ni, and NiO, and the PDMS-coated surface becomes completely hydrophobic. These hydrophobic layers are highly resistant towards degradation under acidic and basic environments and UV-exposures. Nanoparticles coated with PDMS can be used in various environmental applications: hydrophobic silica nanoparticles can selectively interact with oil from oil/water mixture, suppressing fast diffusion of spill-oil on water and allowing more facile physical separation of spill-oil from the water. Upon heat-treatments of PDMS-coated $TiO_2$ under vacuum conditions, $TiO_2$ surface becomes completely hydrophilic, accompanying formation oxygen vacancies responsible for visible-light absorption. The post-annealed $PDMS-TiO_2$ shows enhanced photocatalytic activity with respect to the bare $TiO_2$ for decomposition of organic dyes in water under visible light illumination. We show that the simple PDMS-coating process presented here can be useful in a variety of field of environmental science and technology.

Early Stage Performance of Constructed Wetland System for Nonpoint Source Pollution Control (비점원오염 제어를 위한 인공습지의 초기단계 연구)

  • Kim, Hyung-Chul;Ham, Jong-Hwa;Han, Jung-Yoon;Yoon, Chun-Gyeong
    • Korean Journal of Ecology and Environment
    • /
    • v.39 no.4 s.118
    • /
    • pp.481-488
    • /
    • 2006
  • The field scale experiment was performed to examine the performance of the constructed wetland for nonpoint source (NPS) pollution loading reduction. Four sets (0.88 ha each) of wetland and pond system were used. After three growing seasons of the wetland construction, plant coverage increased to about 90% even without plantation from bare soil surfaces at the initial stage. During the start up period of constructed wetlands, lower water levels should be maintained to avoid flooding newly plants, if wetland plants are to start from germinating seeds. The average removal rate of $BOD_5$, TSS, T-N and T-P during the first two years was 5.6%, 46.6%, 45.7%, and 54.8%, respectively. The $BOD_5$ removal rate was low and it might be attributed to the low influent concentration. The early stage of wetland performance demonstrated the effectiveness of water quality improvement and was satisfactory for treating polluted stream waters. From the first-order analysis, T-P was virtually not temperature dependent, and $BOD_5$ and TSS were more temperature dependent than T-N. A pond-wetland system was more effective than a wetland-pond or a wetland alone system in water quality improvement, particularly to reduce T-P. Overall, the wetland system was found to be an adequate alternative for treating a polluted stream water with stable removal efficiency and recommended as a NPS control measures.

Relationships Between Edge Formation of Burned Forests and Landscape Characteristics with Consideration on Spatial Autocorrelation (공간 자기상관성을 고려한 산불피해지 경계 형성과 경관특성변수들과의 관계)

  • Lee, Sang-Woo;Won, Myoung-Soo;Lee, Hyun-Joo
    • Journal of Korean Society of Forest Science
    • /
    • v.102 no.1
    • /
    • pp.113-121
    • /
    • 2013
  • It has been known that edges of forest fire areas play significant roles in post-fire change of forest ecosystem and recovery process. The purpose of this study was to analyze the relationships between edge formation of burned forests and landscape characteristics with consideration on spatial autocorrelation. Samcheok fire site burned in 2000 was selected as the study area. Seven hundred fifty three of 500 $m^2$ grid cells were generated for measuring landscape characteristics. This study used the topographic variables including slop, elevation, topographic wetness index, solar radiation index and proportions of fuel and land use types. In delineating landscape characteristics correlation analysis with modified t-test were performed for exploring the relationships between edge formation and landscape characteristics. The results indicated that edge formation of burned forests was positively correlated with most variables including TWI, SRI, water, paddy, developed, farm, grass, bare soil, and negatively related with elevation, slope and all fuel types. Especially TWI (r=0.437) showed a strong positive correlation with edge formation. According to the results, edge of burned forests were likely formed when proportions of heterogeneous land use types were high with mild slope and low elevation.

Mark Chagall's Paintings Transferred into Contemporary Korean Poems: Youngtae Kim's Anthology, Winter in the Village of Jews, Chunsoo Kim's "Snow Falling on the Village of Chagall," and Sunghun Lee's Anthology, Poetic Anthology of Chagall (한국 현대시에 수용된 마르크 샤갈 그림 - 김영태 시집 "유태인 사는 마을의 겨울" 김춘수 시 "샤갈의 마을에 내리는 눈" 이승훈 시집 "시집 샤갈$\lcorner$에 수용된 샤갈의 그림세계)

  • 윤호병
    • Lingua Humanitatis
    • /
    • v.1 no.1
    • /
    • pp.141-157
    • /
    • 2001
  • In his discussion of some desirable tuning points in comparative literary studies, Henry H. H. Remark has emphasized the importance of literary approach to other forms of art. Understanding the significance of such a method of comparative literature, the present study focusses on three contemporary Korean poets who have transferred Mark Chagall′s paintings into their poetry: Youngtae Kim, Chunsoo Kim, and Sunghun Lee. They are usually evaluated as surrealist/modernist in our literary circles. In transforming Chagall′s paintings into his poems, Youngtae Kim has incorporated a variety of surrealist mosaic techniques such as montage and collage. The resultant peculiarity of his poetry makes it hard to lay bare the correspondence or similarities between his poetic world and the world of Chagall′s artistry. It is nonetheless possible to see how Kim, as a poet and painter, had interpreted Chagall′s world with a bird′s-eye view of it. Chunsoo Kim′s "Snow Falling on the Village of Chagall" relates specially to one of Chagall′s paintings, "I and My Village." The present study has taken notice of this correlation in sorting out some basic elements of poetic transfiguration. One of the techniques employed in the poem under discussion is that of juxtaposing the Russian village of Chagall and the Korean village the poet visualizes, with the effect of putting two national traditions in contrast. A reading of the poem reveals that it is not so much the result of a detailed analysis of the painting as a revival of its lingering impression as a whole. In Sunghun Lee′s poetry, surrealist techniques are again a hallmark. But his method of transferring the images of the paintings into his poems falls somewhere between those of Youngtae Kim′s and Chunsoo Kim′s: it is akin to the ′bird′s-eye method′ of the former and shares the impressionistic touch with the latter, but at the same time Lee is analytical by disposition and opts for concrete descriptions. ′Love,′ ′farm,′ and ′time′ are the keywords that are brought under discussion in the present study. There is a growing demand in the current international comparative literary studies for broadening the area of comparative literature. This study hopes to be a small contribution to endorsing the importance of comparative approach to fine arts.

  • PDF

Marriage in Korea I. Evidence of Changing Attitudes and Practice

  • Kim, Mo-Im;Harper, Paul A.;Rider, Rowland V.;Yang, Jae-Mo
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.2 no.2
    • /
    • pp.13-26
    • /
    • 1975
  • Seven aspects of attitude toward marriage in Korea are examined to better understand present and future marriage patterns. Also, various facets of current marriage practice are compared with attitudes. The study comprises three groups of roughly 600 women each, selected by random sampling from a rural, an urban, and a semi-urban area. A carefully designed and pretested questionnaire was checked for reliability by a reinterview in a 15% subsample. The great majority of Korean women support traditional attitudes that one must or should marry. The small group who recommend that one should not marry are mostly the very young or the never married, whose attitudes still may change. However, there are important and probably predictive shifts in favor of more individual decision, especially among the better educated, the young, and the more urban. Traditional reasons for marriage such as "custom" and procreation are ranked first by a majority, but there is a large shift to more contemporary or liberal desire for companionship and love, also primarily among the better educated, the urban, the young, and the never married. The traditional attitude that parents should have the sole or major role in mate selection is still held by a bare majority; the educated, urban, young, and never married are more liberal. Only 6% opt for each of the two extremes: That the parent alone or the respondent alone should decide. The remainder prefer one of the two middle-of-the-road positions where parent and child together decide. The proportions of respondents who classed specified criteria as moat important for selecting a husband, arranging the criteria in order from traditional to contemporary were: Lineage, etc., 23%; personal attributes, 40%; health and education, 27%; and love, 10%. The changing attitudes are suggested by the fact that love was ranked first by only 3% of the poorly educated rural poulation versus 23% of urban college level and 31% of the urban never married. There has been a substantial rise in the ideal age of marriage over the past twelve or more years, but there also is evidence that the ideal age is at or near a ceiling. Knowledge about legal age of marriage is minimal; the implications of this for proposed legislation are discussed. Three-fifthes to four-fifths of all respondents married husbands of the same religious, residential, and economic backgrounds as themselves. Almost all of them married men of the same or higher educational level. These evidences of traditional influences in mate selection are contrasted with the low priority given some of those items in earlier questions on reasons for marriage and criterion for selecting husband. Contrary to the expressed attitudes as to who should select the husband, we find that marriages of the study sample were stated to be arranged by parents alone in 62%; and in another 23%, the parents made the decision but asked the respondent's views. Such arrangements were most frequent among the rural, the less educated, and the older respondents and less common in the urban and more educated. The implications of these and related findings are discussed.

  • PDF