• Composites Research
• /
• v.24 no.2
• /
• pp.38-45
• /
• 2011

In this paper, we present an optimization method for the single Dallenbach-layer type microwave absorbers composed of E-glass fabric/epoxy composite laminates. The composite prepreg containing carbon nanotubes (CNT) was used to control the electrical property of the composites laminates. The design technology using the genetic algorithm was used to get the optimal thicknesses of the laminates and the filler contents at various center frequencies, for which the numerical model of the complex permittivity of the composite laminate was incorporated. In the optimal design results, the content of CNT increased in proportion to the center frequency, but, on the contrary, the thickness of the microwave absorbers decreased. The permittivity and reflection loss are measured using vector network analyzer and 7 mm coaxial airline. The influence of the mismatches in between measurement and prediction of the thickness and the complex permittivity caused the shift of the center frequency, blunting of the peak at the center frequency and the reduction of the absorbing bandwidth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.974-987
• /
• 2018

This paper presents a novel and efficient data transmission scheme based on mobile edge computing for the massive IoT environments which should support various type of services and devices. Based on an accurate and precise synchronization process, it maximizes data transmission throughput, and consistently maintains a flow's latency. To this end, the proposed efficient software defined data transmission scheme (ESD-DTS) configures and utilizes synchronization zones in accordance with the 4 usage cases, which are end node-to-end node (EN-EN), end node-to-cloud network (EN-CN), end node-to-Internet node (EN-IN), and edge node-to-core node (EdN-CN); and it transmit the data by the required service attributes, which are divided into 3 groups (low-end group, medium-end group, and high-end group). In addition, the ESD-DTS provides a specific data transmission method, which is operated by a buffer threshold value, for the low-end group, and it effectively accommodates massive IT devices. By doing this, the proposed scheme not only supports a high, medium, and low quality of service, but also is complied with various 5G usage scenarios. The essential difference between the previous and the proposed scheme is that the existing schemes are used to handle each packet only to provide high quality and bandwidth, whereas the proposed scheme introduces synchronization zones for various type of services to manage the efficiency of each service flow. Performance evaluations show that the proposed scheme outperforms the previous schemes in terms of throughput, control message overhead, and latency. Therefore, the proposed ESD-DTS is very suitable for upcoming 5G networks in a variety of massive IoT environments with supporting mobile edge computing (MEC).

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.3
• /
• pp.1-10
• /
• 2004

Video-On-Demand servers use compression techniques to reduce the storage and bandwidth requirements. The compression techniques make the bit rates of compressed video data significantly variable from frame to frame. Consequently, Video-On-Demand servers with a constant bit rate retrieval can not maximize the utilization of resources. It is possible that when variable bit rate video data is stored, accurate description of the bit rate changes could be computed a priori. In this paper, I propose a buffer management scheme called MAX for Video-On-Demand server using variable bit rate continuous media. By caching and prefetching the data, MAX buffer management scheme reduces the variation of the compressed data and increases the number of clients simultaneously served and maximizes the utilization of system resources. Results of trace-driven simulations show the effectiveness of the scheme.

• Journal of Korea Multimedia Society
• /
• v.13 no.4
• /
• pp.560-574
• /
• 2010

Recently, many people can easily contact video telephony service through the mobile terminal owing to the commercialization of 3G communication technology. However, the quality of the serviced video telephony has been not good yet by the actual mobile restrictions. For solving quality problems, this paper presents the design of the object-based video CODEC using hybrid transform in mobile video telephony. The proposed design firstly segment each frame into a significant object and an insignificant object. The proposed design is to improve the quality of a significant object by limiting the bit rate of a insignificant object. Thus, we compress a significant object with high quality and low compression ratio and compress an insignificant object with low quality and high compression ratio. Furthermore, we control the bit rate of the video stream in the limited bandwidth by adjusting the compression ratio of each object. From experimental results, we confirmed that our method has more higher quality than methods in the conventional CODECs at the significant region on the same bit rate.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.258-268
• /
• 2011

Underwater acoustic sensor networks can be used disaster prevention and environmental monitoring systems in underwater environments. Because, the underwater environment is different from the ground, the long propagation delay, low transfer rates and limited bandwidth characteristics should be considered. In this, paper will propose the MAC protocol that allocates time slot into each node according to priority policy through the period of contention-free slot reservation in underwater acoustic sensor networks in order to avoid collision and minimize energy consumption waste. We perform mathematical analysis to evaluate the performance of the proposed protocol with regard to the collision probability, the energy consumption by collision, throughput and channel utilization. We compare the proposed protocol with the conventional protocol, and the performance results show that the proposed protocol outperforms the conventional protocol.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.679-686
• /
• 2005

Because EPON access network shares a medium and aggregates the traffic from EPON subscribers, scheduling media access control on EPON bandwidth allocation is very important. Furthermore DBA mechanism of EPON based on TDMA is out of specification and up to implementation. This paper deals with a DBA method to guarantee the QoS of the delay sensitive traffic on the base of best-effort service and delay priority queue management. The proposed method performs virtual scheduling algorithm for the integrated traffic. It uses the same MAC messages and tries to guarantee the QoS of higher priority traffic first with a simple DBA architecture. We evaluate the algorithm for traffic delay according to polling interval and traffic load of upstream and downstream. The results show that the proposed method can guarantee the QoS of the delay sensitive traffic with priority of the service classes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1066-1072
• /
• 2001

ALOHA Multi-Carrier DS-CDMA systems in the multipath Rayleigh fading channel. The throughput of two systems are compared according to the length of a packet in the fast Rayleigh and the slow Rayleigh multipath fading. As a result, we have known that Multi-Carrier DS-CDMA system has less capacity than wideband DS-CDMA system in the same bandwidth, but throughput of Multi-Carrier DS-CDMA system is higher than that of wideband DS-CDMA system. And in Multi-Carrier DS-CDMA systems, higher throughput can be obtained through shortening the length of packet in the fast Rayleigh fading, and it is efficient to control the length of a packet adequately or increase the system capacity of Multi-Carrier DS-CDMA system in the slow Rayleigh fading.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.68-75
• /
• 2011

The performance of peripheral devices is improving rapidly to meet the needs of users for multimedia data. Therefore, the peripheral interface with wide bandwidth and high transmission rate becomes necessary to handle large amounts of data in real time for multiple high-performance devices. PCI Express is a fast serial interface with the use of packets that are compatible with previous PCI and PCI-X. In this paper, we design and verify general peripheral interface using serial link. It includes two kinds of traffic class (TC) labels which are mapped to virtual channels (VC). The design adopts TC/VC mapping and the scheme of arbitration by priority. The design uses a packet which can be transmitted through up to four transmission lanes. The design of general peripheral interface is described in Verilog HDL and verified using ModelSim. For FPGA verification, Xilinx ISE and SPARTAN XC3S400 are used.We used Synopsys Design Compiler as a synthesis tool and the used library was MagnaChip 0.35um technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.329-337
• /
• 1999

In this dissertation, the characteristics of W-CDMA(Wideband CDMA) are studied and required specifications of IMT-2000 transceiver using W-CDMA method are proposed. Also, in order to design the RF circuits satisfied the proposed specifications, theoretical models are expanded and real circuits are made. Then the RF circuits of the mobile stations are implemented in the three parts, transmitter, receiver and frequency synthesizer and are evaluated. The frequency synthesizer is designed using techniques of swallow counter and passive 3rd loop filter. For improving characteristics of the loop, a LPF was added to the 2nd loop filter. So although the locking times are loosed, the spurious are reduced. The output power of transmitter is over 50mW, the spurious output is -40dB/30kHz at 5MHz offset and power control range is -20dB at 2.5V. The proposed specifications are considered in highly practical environment and the theoretical designs and the experiments are expressed as simply as possible in order to facilitate understanding. It stands to reason that the results of this study can be used to design the wider CDMA(25MHz Bandwidth) mobile communication systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.228-238
• /
• 2003

We believe that existing wire solutions such as HomePNA2.0 using phone lines and HomePlug using power line and wireless solution such as HomeRF are the most promising solutions, because of its cost-effectiveness. However, MAC protocols of these solutions provide only Class of Service(CoS) using priority mechanism like HomePNA and HomePlug or consider only voice among real-time traffics like HomeRF. For these reasons, we perceive the needs of the new MAC protocol which is no new wire solution and provides guaranteed Quality of Service (QoS) for not only voice but also video and audio. In light of this, we present the design and software implementation of a new MAC protocol for Home Networks. Our evaluation results of software implementation verify that proposed MAC protocol can provide low delay, low loss, and low jitter to real-time traffic by reserving bandwidth.