• 대한금속재료학회지
• /
• 제50권6호
• /
• pp.445-448
• /
• 2012

We studied the effect of temperature and reaction time by investigating the various temperatures and reaction times in the reduction of molybdenum oxide ($MoO_3$) to molybdenum (Mo) powder in hydrogen gas. We also studied the effect of the reaction of reduction according to the various hydrogen gas flow rates. We surveyed the reduction from molybdenum oxide to molybdenum powder in hydrogen gas and checked two temperature ranges, one from $400^{\circ}C$ to $600^{\circ}C$ and the other from $700^{\circ}C$ to $900^{\circ}C$. We found that the reaction ratio of molybdenum oxide increased with an increasing temperature and also increased with an increasing reaction time, but hydrogen gas did not influence the reduction ratio of molybdenum oxide. We examined molybdenum powders fabricated by ball milling for two hours, using with X-ray diffraction (XRD) and a scanning electron microscopy (SEM).

• 자원리싸이클링
• /
• 제17권5호
• /
• pp.44-51
• /
• 2008

본 연구에서는 국산 99.7%순도의 수산화알루미늄을 대상으로 미량원소로 함유되어 있는 Na, Ca및 Fe의 제거실험을 수행하였다. 용출액으로는 유기산인 oxalic acid와 citric acid를 사용하였으며 수산화알루미늄은 초기 입도가 서로 다른 2종류의 시료를 사용하였다. 수산화알루미늄의 미립화를 위해 ball mill을 사용하여 미분쇄 실험을 수행하였으며, 용출조건에 따른 미량원소의 용출특성을 조사하였다. 실험결과 0.1$\sim$1.0mole/l 농도범위에서 oxalic acid에 의한 원소 용출율이 citric acid보다 높은 것으로 나타났으며, 유기산 농도가 증가할수록 또한 반응온도가 증가할수록 원소의 용출율은 증가하였다. 미분쇄 공정시 순수한 물에 의한 Na의 용출율은 약 45%에 달해 aluminum hydroxide에 함유된 Na성분의 상당 부분은 수용성 화합물인 것으로 확인되었다.

• 대한금속재료학회지
• /
• 제48권9호
• /
• pp.819-824
• /
• 2010

NiTi powders were synthesized during high energy ball milling for 10 h. Highly dense nanostructured NiTi with a relative density of up to 99% was obtained within 1 minute by high frequency induction heated sintering under a pressure of 80 MPa. The grain size, microstructure, and mechanical properties of NiTi were investigated. The grain size and hardness of TiNi are about 122 nm and $590kg/mm^2$, respectively.

• 한국재료학회지
• /
• 제11권2호
• /
• pp.137-145
• /
• 2001

수용액 매체에서 젤케스팅을 이용하여 복잡한 형상의 세라믹스를 제조하기 위한 새로운 공정을 연구하였다 용융실리카 분말과 첨가제로서 지르콘과 코디어라이트 조성으로 혼합된 현탁액을 electrosteric 방법으로 안정화시켰다. 슬립은 다성분계 세라믹 현탁액에 단량체, 이량체 그러고 분산제를 혼합하고, 볼밀하여 준비하였다. 슬립의 유동학적 특성을 평가하기 위해 점도를 측정하였으며 , 낮은 점도를 갖는 50vo1%의 고농도 다성분계 세라믹 슬립의 제조가 가능하였다. 슬립의 점도는 고분자 분산제의 함량과 단량체 및 이량체의 혼합비에 크게 의존하였다. 성형체는 안정화시킨 슬립을 몰드에 부어 상온에서 젤화시킨 후 $25^{\circ}C$, 80~85% 상대습도 분위기 하에서 48시간동안 건조시켜 제조하였으며 건조된 성형체에는 균열이 발생하지 않았다.

• 분석과학
• /
• 제6권2호
• /
• pp.225-229
• /
• 1993

알루미나 강화 지르코니아(10-30ATZ) 제조에 있어 지르코니아(TZ-2Y or TZ-0Y)와 알루미나(AKP-30) 분말 slurry에 2wt% 알루미나에 해당하는 알루미나졸을 첨가한 후 겔화시킴으로써 분말이 고르게 분산되어 있고, 동시에 알루미나겔이 분말의 표면을 코팅함으로써 응집이 일어나는 것을 막았다. 이렇게 제조된 ATZ는 $1450{\sim}1550^{\circ}C$ 이상에서 2시간 소결로 알루미나 grain이 $0.5{\mu}m$ 이하로 잘 분포되어 있는 좋은 미세구조와 이론 밀도의 99% 이상의 소결밀도를 보여 주었다. 또한 20ATZ 부근에서의 $K_{IC}$값은 ${\sim}8MPa{\cdot}m^{1/2}$으로 볼-밀링으로 얻는 $6MPa{\cdot}m^{1/2}$보다 높은 값을 보여주고 있다.

• 대한금속재료학회지
• /
• 제50권11호
• /
• pp.861-866
• /
• 2012

A dense nanostructured TiN-AlN composite was prepared from high-energy ball milled TiN-AlN mixture powders by pulsed current activated sintering (PCAS). A highly dense TiN-AlN bulk composite was obtained within 2 minutes at $1500^{\circ}C$ with the simultaneous application of 80 MPa pressure and pulsed current. The fine crystalline structure of the TiN-AlN mixture, which was obtained by high-energy milling, was effectively maintained during PCAS and resulted in the enhancement of the mechanical properties. The micro hardness and fracture toughness of TiN-AlN composite were $1780kg/mm^2$ and $5MPa.m^{1/2}$, respectively. The mechanical properties were higher than monolithic AlN or TiN.

• 대한금속재료학회지
• /
• 제50권4호
• /
• pp.310-315
• /
• 2012

Nano-powders of 1.5TiAl and $Al_2O_3$ were synthesized from $1.5TiO_2$ and 3Al powders by high energy ball milling. Nanocrystalline $Al_2O_3$ reinforced composite was consolidated by pulsed current activated sintering within 2 minutes from mechanochemically synthesized powders of $Al_2O_3$ and 1.5TiAl. The relative density of the composite was 99.5%. The average hardness and fracture toughness values obtained were $1250kg/mm^2$ and $10MPa{\cdot}m^{1/2}$, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.413-415
• /
• 2000

Piezoelectric ceramics of PZT have been developed to apply for transformers in notebook. Use of piezoelectric ceramics in applications like piezoelectric transformers was made possible by the development of new materials with high electromechanical coupling coefficients and high mechanical quality factor. "Hard" ferroelectiric ceramics of complex composition based on lead zirconate titanate with Mn additive have been prepared. The perovskitic phase reaction of the oxides. The crucial role played by the intermediate mixing and grinding procedures in the assessment of the final properties of the material was investigated. Densification up to approximately the theoretical density value was achieved. The polarization was obtained by subjecting the samples at $30kVcm^{-1}$ poling electric field, in a silicon oil bath heated at $110^{\circ}C$. Their microstructural and morphological properties were checked by X-ray diffraction analysis and scanning electron microscopy. The optimized samples presented very high qualify and electromechanical coupling factors, together with small dielectric loss.

• 대한금속재료학회지
• /
• 제49권11호
• /
• pp.868-873
• /
• 2011

In this study, the fabrication of ultra fine grained Mo bulk was conducted. $MoO_3$ nanopowders were prepared by a high energy ball-milling process and then reduced at the temperature of $800^{\circ}C$ without holding time in $H_2$ atmosphere. The particle size of Mo nanopowder was ~150 nm and grain size was ~40 nm. The two-step process was employed for the sintering of Mo nanopowder to obtain fine grain size. The densification over 90% could be obtained by the two-step sintering with a grain size of less than 660 nm. For higher density, modified two-step sintering was designed. 95% of theoretical density with the grain size of 730 nm was obtained by the modified two-step sintering.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.374-379
• /
• 2011

Nano-powders of $Ti_3Al$ and $2Al_2O_3$ were synthesized from $3TiO_2$ and 5Al powders by high energy ball milling. A nanocrystalline $Al_2O_3$ reinforced composite was consolidated by pulsed current activated sintering within 2 minutes from mechanochemically synthesized powders of $Al_2O_3$ and $Ti_3Al$. Nanocrystalline materials, have received much attention as advanced engineering materials due to their improved physical and mechanical properties. The relative density of the composite was 99.5%. The average obtained hardness and fracture toughness values were 1510 kg/$mm^2$ and $9\;MPa{\cdot}m^{1/2}$, respectively.