• Journal of Sensor Science and Technology
• /
• v.21 no.5
• /
• pp.379-384
• /
• 2012

This paper presents the power source of wireless sensor node (WSN) using supercapacitors and a solar cell. Supercapacitors have high lifetime cycling compared to that of batteries. Supercapacitors are connected in series to achieve higher voltage and a voltage balancing circuit is required to ensure that no individual cell goes overvoltage. We employ an active balancing circuit that draws minimal current by using transistors. A diode is connected in series with each supercapacitor. A new balancing circuit that equalize the cells-voltage reduces energy consumption of supercapacitors. Voltage of operating WSN is applied 2.2-3.3V by DC/DC converter and supercapacitor voltage 2.2-5.1V. Maximum operating time of wireless sensor node is about 16 hours in full charging.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2326-2337
• /
• 2013

Many applications can be parallelized by using multicore platforms. We propose a load-balancing technique for parallelizing a whole application, whose first module (H.264) has data independency and whose second module (AES) has data dependency. Instead of distributing the first module symmetrically over the multi-core platform, we distribute the data-independent workload asymmetrically in order to start the data-dependent workload as early as possible. Based on the experimental results with a compression/encryption application, we confirm that the asymmetric load balancing can provide better performance than the typical symmetric load balancing.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.1
• /
• pp.40-46
• /
• 2018

In this study, the output voltage balancing characteristics of parallel-input series-output (PISO) boost converter is analyzed. The PISO boost converter is derived by combining two basic boost converters. In comparison with the conventional three-level boost converter, the PISO boost converter can balance the output voltages under an unbalanced load condition without requiring additional circuit components and control strategy. A 2 kW prototype converter is built and tested to verify the output voltage balancing characteristics of the PISO boost converter.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.466-471
• /
• 2014

An asynchronous optical packet-switching (AOPS) node with load-balancing capability can achieve better performance in reducing the high packet-loss ratio (PLR) and time delay caused by unbalanced traffic. This paper proposes a novel dynamic load-balancing algorithm for an AOPS node with limited buffer and without wavelength converters, and considering the data flow distribution and service levels. By calculating the occupancy state of the output ports, load state of the input ports, and priorities for data flow, the traffic is balanced accordingly. Simulations demonstrate that asynchronous variant data packets and output traffic can be automatically balanced according to service levels and the data flow distribution. A PLR of less than 0.01% can be achieved, as well as an average time delay of less than 0.46 ns.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.1
• /
• pp.51-65
• /
• 2000

Multiple U-typed producton lines are increasingly accepted in modern marufacturing system for the flexbility to adjust to changes in demand. This paper considers multiple U line balancing with the objective of minimizing cycle time considering the moving time of workforce given the number of workstation. Like the traditional line balancing problem this problem is NP-hard. In this paper, we show how genetic algorithm can be used to solve multiple U line balancing problem. For this, an encoding and a decoding method suitable to the problem are presented. Proper genetic operators are also employed. Extensive computational experiments are carried out to show the performance of the performance of the purposed algorithm. The computational results show that the algorithm is promising in solution quality.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.3
• /
• pp.200-208
• /
• 2014

This paper presents the control of an inverted pendulum system using intelligent algorithms, such as fuzzy logic and neural networks, for advanced control education. The swing up balancing control of the inverted pendulum system was performed using fuzzy logic. Because the switching time from swing to standing motion is important for successful balancing, the fuzzy control method was employed to regulate the energy associated with the angular velocity required for the pendulum to be in an upright position. When the inverted pendulum arrived within a range of angles found experimentally, the control was switched from fuzzy to proportional-integral-derivative control to balance the inverted pendulum. When the pendulum was balancing, a joystick was used to command the desired position for the pendulum to follow. Experimental results demonstrated the performance of the two intelligent control methods.

• IE interfaces
• /
• v.12 no.1
• /
• pp.132-142
• /
• 1999

Two-sided (left- and right-sided) assembly lines in practice can provide several advantages over one-sided lines in terms of the required line length, throughput time, cost of tools and fixtures, and so on. This paper considers two-sided assembly line balancing with the objective of minimizing line length. The balancing problem is more complicated than that of one-sided lines due to sequence-dependency of tasks assigned to a pair of directly facing workstations. This paper shows how genetic algorithm can be used to solve two-sided assembly line balancing. For this, an encoding and a decoding method suitable to the problem are presented. Proper genetic operators and an evalutation function are also employed. Extensive computational experiments are carried out to show the efficacy of the proposed algorithm. The results show that the algorithm is viable and promising in solution quality and computation time.

• IE interfaces
• /
• v.9 no.3
• /
• pp.64-71
• /
• 1996

In the survivability and simplicity aspect, SONET Self-healing Ring(SHR) is one of the most important schemes for the high-speed telecommunication networks. Since the ring capacity requirement is defined by the largest STS-1 cross-section in the ring, load balancing is the key issue in the design of SONET SHR. Recently, most of the research on load balancing problem have been concentrated on the SONET single-ring case. However, in certain applications, multiple-ring configuration is necessary because of the geographical limitations or the need for extra bandwidth. In this paper, the load balancing problem for SONET dual-ring is considered by assuming symmetric inter-ring demands. We present a linear programming based formulation of the problem. Initial solution and improvement procedures are presented, which solves the routing and interconnection between the two rings for each demand. Computational experiments are performed on various size of networks with randomly generated demand sets. Results show that the proposed algorithm is excellent in both the solution quality and the computational time requirement. The average error bound of the solutions obtained is 0.26% of the optimum.

• Journal of TMJ Balancing Medicine
• /
• v.5 no.1
• /
• pp.27-32
• /
• 2015

Therapeutic effect of Customized yinyang Balancing Appliance (CBA) of functional cerebrospinal therapy (FCST) for meridian and neurological yinyang balance was observed in infertility case. One infertility case was managed with the CBA, combined with acupuncture and herb-medicine. Clinical outcome measurement was based on subjective measures and clinical observations. The patient showed positive changes in subjective symptoms after the treatment and this effect maintained over the follow-up period. And the patient gave a birth to a female child. Further clinical and biological research on FCST is expected.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.618-620
• /
• 2008

A distributed virtual environment (DVE) allows multiple geographically distributed objects to interact concurrently in a shared virtual space. Most DVE applications use a non-replicated server architecture, which dynamically partitions a virtual space. An important issue in this system is effective scalability as the number of users increases. However, it is hard to provide suitable load balancing because of the unpredictable movements of users and hot-spot locations. Therefore, we propose a mechanism for sharing roles and separating service regions. The proposed mechanism reduces unnecessary partitions of short duration and supports efficient load balancing.