• International Journal of Computer Science & Network Security
• /
• 제23권7호
• /
• pp.23-31
• /
• 2023

This article discusses the sabotage of loops of intruder alarm systems. Although loop alarm systems are now gradually being replaced by digital alarm systems, they are still significantly present in practice. This paper describes two experimentally verified techniques for sabotaging balanced loops. The first technique is based on the jump replacement of the balancing resistor by a fake resistor. The second technique is based on inserting a series-parallel combination of two rheostats into the loop. By alternately changing the resistance of these rheostats, a state is reached where the balancing resistor is shorted by the parallel rheostat and replaced by the series rheostat. Sabotage devices for both attacks are technically simple and inexpensive, so they can be made and used by an amateur. Owners of loop alarm systems should become find out about this threat.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2208-2218
• /
• 2017

To resolve overload in a distribution system, a distribution system operator (DSO) often performs a load transfer using normally open tie points and switches in the distribution line. During this process, the distribution system is momentarily operated in closed-loop operation. A closed-loop current in the distribution system can cause a power failure due to excess breaking current in the circuit breakers and reclosers. Therefore, it is necessary to calculate the closed-loop current exactly. However, if there are a large number of distributed generation (DG) systems in the distribution system, such as energy storage systems (ESS), they might obstruct the closed-loop operation based on bidirectional power flow. For quick and precise operation of a closed-loop system, the ESS has to regulate the power generation while satisfying closed-loop operation in the worst cases. We propose a strategy for balanced power regulation of an ESS. Simulations were carried out using PSCAD/EMTDC, and the results were compared with calculation results.

• 전자공학회논문지S
• /
• 제34S권3호
• /
• pp.24-32
• /
• 1997

This paper is on a discrete controller order reduction with the closed-loop stability and performance guaranteed. to achieve this, after finding the solutionsof two lyapunov inequalities and balancing the full order controller system, we find the reudced order controlers using the balanced truncation (BT) and the balanced singular perturbation approximation (BSPA). When the solutions of the two lyapunov inequalities exist, it is shown that the resulting controllers guarantee the closed-loop stability, and .inf.-norm error bounds are derived for the closed-loop performance region for the BT and in low frequency region for the BSPA. Finally, a numerical example is given to illustrate the validity of the proposed method.

• 대한기계학회논문집
• /
• 제17권11호
• /
• pp.2730-2741
• /
• 1993

A mathematical model of the seeker scan-loop which is composed of a spin-stabilized gyroscope and its driving signal processors is derived. The derived model has a transmission zero pair on the imaginary axis near to the required bandwidth. The LQG/LTR design methodology is evolved for the derived scan-loop model. To implement the designed LQG/LTR compensator to the actual plant, the compensator order is reduced using the internally balanced realization method. The performances of the LQG/LTR compensator are tested and compared with those of the P-control. Especially, stability-robustnessexperiments for model uncertainties represented in the form of time-delays are performed. It is demonstrated that the LQG/STR compensator is actually very robust to model uncertainties.

• ETRI Journal
• /
• 제31권4호
• /
• pp.475-477
• /
• 2009

A balanced dual-band bandpass filter based on ${\lambda}$/2 stepped-impedance resonators and open-loop resonators is proposed in this letter. By employing a type of self-feedback structure, an extra transmission zero is introduced near the common-mode resonance frequency, and the common-mode signal is suppressed. The measured results indicate that the filter can operate in 2.46 GHz and 5.6 GHz bands, and the insertion loss is 1.85 dB and 1.9 dB, respectively. Also, better common-mode suppression is achieved.

• 제어로봇시스템학회논문지
• /
• 제16권1호
• /
• pp.77-82
• /
• 2010

An analytical method for robust design of the multi-loop proportional-integral (PI) controller is proposed for various types of multi-delay processes. On the basis of the direct synthesis and generalized IMC-PID approach, the analytical tuning rules of the multi-loop PI controller are firstly derived for achieving the desired closed-loop response, and the structured singular value synthesis is then utilized for the tradeoffs between the robust stability and performance by adjusting only one design parameter (i.e., the closed-loop time constant). To verify the superiority of the proposed method, the simulation studies have been conducted on a wide variety of multivariable processes. The multi-loop PI controller designed by the proposed method shows a fast, well-balanced and robust response with the minimum integral absolute error (IAE) in compared with other renowned methods.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.48-53
• /
• 1999

We demonstrate small-scale high-T$_c$ superconductor RSFQ(Rapid Single Flux Quantum) circuits using multilayer bicrystal technology. An RSFQ balanced comparator is demonstrated with good current resolution, and its operating conditions are discussed in some detail. A single-loop delta-sigma modulator is realized adding a feedback loop to the comparator. The effect of the feedback is confirmed by dc measurement and simulation. A design of an RSFQ toggle flip-flop with the same multilayer bicrystal technology is suggested.

• 한국전자파학회논문지
• /
• 제25권1호
• /
• pp.25-31
• /
• 2014

본 논문에서는 인체 내 외부간 근거리 통신망인 WBAN(Wireless Body Area Network)에서 인체 부착형 기기간 통신링크를 원활하게 구성하기 위한 변형된 Alford 안테나를 제안하였다. 제안된 안테나는 인체의 영향을 고려해 설계하였으며, ISM(The Industrial, Scientific and Medical, 2.4~2.485 GHz) 대역에서 동작한다. 기존 Alford 루프 안테나는 low-profile인 장점이 있지만, 인체 부착용 시스템의 다른 부품을 설치할 접지면이 존재하지 않고 balanced 급전 구조를 사용하기 때문에 on-body 안테나로 적합하지 않다. 따라서 본 논문에서는 on-body 환경에서 동작할 수 있는 접지면이 포함된 unbalanced 급전 구조를 갖는 안테나를 제안하였다. 또한, 안테나가 인체에 부착되어 안테나 성능에 미치는 영향을 고려하기 위해 모의 인체를 통해 모의실험과 측정을 수행하였다. 제안된 안테나는 모노폴 형태의 방사 패턴을 갖는 low-profile 구조이며, ISM 대역 내에서 10 dB 반사 손실을 만족한다. 안테나는 on-body 통신 환경에 적합한 표면지향성 특성을 갖는다.

• 설비공학논문집
• /
• 제10권4호
• /
• pp.389-397
• /
• 1998

A loop duct system is often found in a VAV-HVAC(variable air volume heating, ventilating and air conditioning) design. It is known that the simple T-method is not be applicable to the loop duct system and cannot be used to calculate the flow rate and the pressure drop at each duct section of the loop duct system. In this paper, the extended T-method has been developed and it is found to be applicable to the loop duct system to which the simple T-method cannot be applied. The validity of the extended T-method has been verified by using to solve for a simple, ideal loop duct system for which there exists analytical solution. In addition, the extended T-method is employed to compute the loop duct system of a real building with an area of 380$m^2$. The results show that the computed flow rate at the exit differs from the designed flow rate by a range of -13.6~43.5 %. Consequently, three design factors must be adjusted in order that the flow rate may be balanced. These include the duct sizes, in terms of their lengths and diameters, the sub-duct locations and the positioning of damper which is found upstream of the exit duct.

• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1262-1270
• /
• 2007

본 논문에서는 feedforward와 post-distortion 기법을 이용하여 평형 증폭기 내에서 발생하는 혼변조 왜곡 성분을 제거할 수 있는 새로운 왜곡 상쇄 메커니즘인 cross post-distortion 선형화 기법을 제안한다. 출력 동적 영역과 대역폭 측면에서 제안하는 선형화 방식은 기존의 feedforward 방식에 뒤지지 않는 성능을 가지고 있으면서 상대적으로 높은 효율을 제공한다. 이론적 뒷받침을 위해 제안하는 시스템과 feedforward 방식의 전력 증폭기와 오차증폭기의 전력 용량을 비교 분석하였고, IMT-2000 대역에서 실제 구현을 통하여 이를 실험적으로 뒷받침하였다. 최대 출력 전력 240 W의 기지국용 상용 대전력 증폭기에 적용했을 때, wideband code division multiple access (WCDMA) 4FA 신호에 대하여 평균 출력 전력 40 dBm에서 약 18.6 dB의 개선 효과를 얻었다. 제작된 전력 증폭기는 WCDMA 신호 기준으로 feedforward 방식에 비해 약 2 % 개선된 효율을 보였다.