• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.303-310
• /
• 2000

A new stress path testing scheme with back pressure equalization process is proposed, to compute the settlement of clay soils based on their probable deformation mode. The proposed testing scheme minimizes the efforts for testing, otherwise numerous testing works are required to simulate the probable stress paths in the field. Furthermore, the proposed testing scheme can supply anisotropic stress paths for consolidation which cannot be possible in a conventional way. The validity and effectiveness of the proposed testing scheme was investigated and confirmed with test results on remolded kaolinite clay soils. Conclusively, it is suggested that the proposed testing scheme is a very effective tool to compute settlement of clay soils and it is also very useful to investigate the anisotropic characteristics of deformation of clay soils.

• 한국전문물리치료학회지
• /
• 제20권4호
• /
• pp.22-31
• /
• 2013

The aim of the present study was to compare measurement precisions of the Oswestry Back Pain Disability Questionnaire (ODQ) and a computer adaptive testing (CAT) method. The ODQ has been regarded as one of the most reliable condition-specific measure for back pain for decades. Cross-sectional study was carried out with two independent convenient samples from two out-patient rehabilitation clinics for back pain ($n_1=42$) and non-back pain group ($n_2=42$). Participants were asked to fill out the ODQ and CAT of International Classification of Functioning, Disability and Health-Activity Measure (ICF-AM). A series of Rasch analyses were performed to calculate person ability measures. The CAT measures had greater relative precision in discriminating the groups than did the ODQ measure in comparisons of the relative precision. The CAT measure appears to be more effective than did the ODQ measure in terms of measurement precision. By administering test items calibrated in a way, CAT measures using item response theory may promise a means with measurement precision as well as efficiency.

• 한국전문물리치료학회지
• /
• 제19권3호
• /
• pp.124-131
• /
• 2012

Most conventional instruments measuring disability rely on total score by simply adding individual item responses, which is dependent on the items chosen to represent the underlying construct (test-dependent) and a test statistic, such as coefficient alpha for the estimate of reliability, varying from sample to sample (sample-dependent). By contrast, item response theory (IRT) method focuses on the psychometric properties of the test items instead of the instrument as a whole. By estimating probability that a respondent will select a particular rating for an item, item difficulty and person ability (or disability) can be placed on same linear continuum. These estimates are invariant regardless of the item used (test-free measurement) and the ability of sample applied (sample-free measurement). These advantages of IRT allow the creation of invariantly calibrated large item banks that precisely discriminate the disability levels of individuals. Computer adaptive testing (CAT) method often requiring a testing algorithm promise a means for administering items in a way that is both efficient and precise. This method permits selectively administering items that are closely matched to the ability level of individuals (measurement precision) and measuring the ability without the loss of precision provided by the full item bank (measurement efficiency). These measurement properties can reasonably be achieved using IRT and CAT method. This article aims to investigate comprehensive overview of the existing disability instrument for back pain and to inform physical therapists of an alternative innovative way overcoming the shortcomings of conventional disability instruments. An understanding of IRT and CAT method will equip physical therapist with skills in interpreting the measurement properties of disability instruments developed using the methods.

• 비파괴검사학회지
• /
• 제22권6호
• /
• pp.621-626
• /
• 2002

The amplitude of a back-wall echo depends on the reflection coefficient of the interface between a transducer and a test material when using contact pulse-echo ultrasonic testing. A couplant is used to transmit ultrasonic energy across the interface, but has an influence on the amplitude of the pulse-echo signal. To investigate the couplant effect on pulse-echo ultrasonic testing, back-wall echoes are measured by using various couplants made of water and glycerine in a carbon and austenitic stainless steel specimens. The amplitude of the first back-wall echo and the apparent attenuation coefficient increases with the acoustic impedance of the couplant. The couplant having a higher value of the transmission coefficient is more effective for flaw detection. The reflection coefficient should be known in order to measure the attenuation coefficient of the test material.

• 응용통계연구
• /
• 제23권2호
• /
• pp.219-234
• /
• 2010

시가총액에 따른 인덱스(INDEX) 투자를 했을 경우에, VaR(Value at Risk)을 종합주가지수(KOSPI)로부터 얻은 수익율의 극단 손실값들로부터 추정한다. 이를 위해, 극단값 이론 중 BM(Block Maxima) 모형을 적용하며, 극단 손실값들의 비독립적 발생을 고려하기 위하여, extremal index 역시 추정한다. 모형의 타당성을 알아보기 위해, 실패율방법을 이용한 사후검정 (back-testing) 을 실시한다. 사후검정을 통해, BM 모형을 적용한 VaR의 추정이 적절함을 알 수 있었다. 또한, 일반적으로 많이 사용되는 GARCH 모형을 이용한 VaR의 추정과 비교한다. 이를 통해, 오차가 t-분포를 따른다고 가정하는 경우, GARCH 모형을 이용한 VaR의 추정이 BM 모형을 이용한 경우와 사후 검정결과에 차이가 없음을 확인하였다. 그러나, GARCH 모형을 통한 VaR 추정은 추정시점근방의 극단 손실값들에 민감하게 반응하지만, BM 모형은 그렇지 않았다. 따라서, 현 시점으로부터 단기간동안의 손실위험은 GARCH 모형을 이용한 VaR의 추정값을 사용하는 것이 적절하며, 장기간동안의 손실위험은 BM 모형으로부터 얻은 VaR의 추정값을 사용하는 것이 적절하다.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.122-132
• /
• 2017

This study dealt with the design process of the 78 kW permanent magnet synchronous generator for engines. After the calculation of the basic dimensions through a theoretical method in the process of initial model design, FEA (finite-element analysis) and a d,q-axis equivalent circuit were used to identify the generator characteristics depending on the number of poles. With the use of the space harmonic analysis method, the back-EMF (electromotive force) and THD were checked, and then the number of slots was determined. In addition, the most optimized generator dimensions were determined through a sizing optimization technique. Based on this, the optimum model with enhanced efficiency, material costs, and temperature characteristics was derived, and the availability of the design method was confirmed through a comparative analysis of the initial and optimum models.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.174-179
• /
• 2016

In this paper, a novel full-aperture reflective null measuring method is proposed to detect the transmission wavefront of a conformal dome surface. An aspheric compensator is designed and placed behind the dome to reflect the aspheric testing wave back to the same path. To ensure the feasibility of this method, tolerance analysis is conducted, and guidance to assembly is given accordingly. The accuracy of this method is verified to be λ/30 (λ =3.39 μm) by Monte Carlo algorithm. In addition, the influence of different error factors, including the thickness error and decenter error of the dome, on the testing wavefront is analyzed. Simulation and experiment indicate that this method is practical and simple, and can measure the conformal domes precisely and comprehensively.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제36권1호
• /
• pp.45-53
• /
• 2009

최근 GUI 컴포넌트는 소프트웨어의 중요한 성공 요소이다. 따라서 GUI 컴포넌트는 반드시 검증되어야 한다. 그러나 소프트웨어의 GUI 검증을 위한 테스트에는 많은 시간과 비용이 소요된다. 이러한 자원의 소비를 줄이기 위해서는 GUI 테스트의 자동화가 필연적이다. 본 논문에서는 GUI 테스트를 수행하기 위해 고려해야 할 문제를 논하고 기존치 Record & Play-back 기술을 기반으로 한 GUI 테스트 케이스 생성 기법을 보완한다. 이를 위해 스파이 기술을 이용한 이벤트 생성 방법과 이렇게 생성된 이벤트를 그룹화하여 다양하고 효과적인 시나리오 생성 방법을 제안한다. 그리고 이렇게 생성된 시나리오를 바탕으로 GUI 테스트 케이스 생성 방법을 기술한다.

• Journal of Welding and Joining
• /
• 제19권1호
• /
• pp.40-48
• /
• 2001

An ultrasonic test method, as a nondestructive test is applied to ensure the clad interface quality assessment. According to the reference codes and standards, not only korea Industrial Standard(KS) but also American Society for Testing and Materials (ASTM) Standard, ultrasonic examination procedures use the pulse-echo, A-scan, back reflection signal drop method and/or side drilled reference hole used to establish the acceptance criteria of clad material test. But the variety of bonding materials and sizes makes it difficult to produce the reference blocks, or thus the criteria. In order to overcome these practical difficulties, new ultrasonic testing criterion is suggested. In this new method, the theoretical interface reflection signal amplitude level is calculated and suggested as an acceptance criteria with the back reflection signal set to 100% FSH(Full Screen Height) which is based on acoustic impedance mismatch at the clad interface for the explosive clad ultrasonic inspection. Applicability of suggested criterion, for the explosive clad Fe-Naval Brass with different bonding quality is confirmed to the pre-existed KS and ASTM specifications and verified by using SEM (Seanning Electron Microscope) micrograph. The results obtained by the suggested method is more conservative than the results according to the KS B 0234 and ASTM A 578 specifications The suggested method could be applicable to any other combination of explosive clad ultrasonic inspection.

• 응용통계연구
• /
• 제29권1호
• /
• pp.171-180
• /
• 2016

바젤 위원회는 시장위험의 측정 도구로 Value-at-Risk(VaR)와 expected shortfall(ES)을 사용할 것을 제안하였다. 여러 문헌에서 VaR와 ES의 다양한 추정 방법들이 연구 되었다. 본 연구에서는 준모수적인 방법인 conditional autoregressive value at risk(CAViaR), conditional autoregressive expectile(CARE) 방법들, 그리고 Gaussian 준최대가능도 추정량(QMLE)를 이용한 방법을 사후 검정을 통해서 비교하고자 한다. 각 방법의 타당성을 확인하기 위해서, VaR에 대한 사후 검정은 unconditional coverage(UC)와 conditional coverage(CC) 검정을 사용하고 ES에 대한 검정은 붓스트랩 방법을 사용한다. S&P500 지수와 현대 자동차 주식가격 지수에 대하여 실증 자료 분석이 수행되었다.