• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.19-28
• /
• 2014

Recently, the proportion of long tunnel has increased for efficient use of land due to limited land area, driving convenience and high speed. RMR and Q-System of empirical methods has been mainly used for tunnel support design in domestic. Although shotcrete is the key to NATM tunnel, the related studies are insufficient. So, steel fiber reinforced shotcrete is applied to II~V grade rocks on domestic and foreign applications. And same amount of shotcrete is equally applied to tunnel roof and wall regardless of the applied rock load. Shotcrete is applied excessively rather than the original proposed value of RMR and Q-System. Thus, this study is to reevaluate the application part of plain shotcrete and steel fiber reinforced shotcrete of tunnel in Daebo granite, and to propose the reasonable application method of steel fiber reinforced shotcrete. Field test and numerical back analysis using measurements were performed to verify stability. According to results, if RMR values are the upper class in the III grade, it can be designed in accordance with upper grade. In addition, if rock condition is good as a mountain tunnel in Daebo granite, it can be applied for plain shotcrete to III grade rocks because there is also no stability problems. And although steel fiber reinforced shotcrete is applied only crown of the tunnel in IV grade rocks, it is possible to secure stability for falling rock by key-block.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1553-1558
• /
• 2012

This study was conducted to investigate the effects of stocking density or group size on feed intake, daily gain, and carcass characteristics of Hanwoo (Korean indigenous breed) steers reared from 7 months to 31 months of age. Thirty Hanwoo steers were divided into four groups with three replicates each (a total of 12 pens). In each group, one (G1), two (G2), three (G3), and four steers (G4) per pen were allocated as treatments. Pen size was $32.0m^2$, and therefore Hanwoo steers in G1, G2, G3, and G4 were reared under different space allowances, i.e. 32.0, 16.0, 10.6, and $8.0m^2$/steer, respectively. Steers were reared following a conventional beef cattle management method in Korea, and were offered a fixed amount of commercial concentrate with ad libitum forages. Results were subjected to analysis of variance with stocking density as the main effect, and significance was declared at p<0.05. Although total feed intake was not significantly altered, it numerically increased in animals of low stocking density (G1) compared to those subjected to high stocking density treatment (i.e. G4). Feed conversion ratio was higher (p<0.05) in G3 compared to G1 and G2. Animals in G1 (low stocking density) grew faster (p<0.05) than those of high stocking density (G3 and G4). Back fat thickness, meat yield index, and meat yield grade were similar among all levels of stocking density. However, longissimus muscle area was larger in G1 and G2 (p<0.01) compared to G3 and G4, and animals in G3 produced smaller carcasses (p<0.05). Carcass quality traits, including marbling score, meat color, fat color, texture, maturity and meat quality grade, as determined by a group of experts, were not significantly different among the treatments. In conclusion, lower stocking density resulted in increased feed efficiency, daily gain, and carcass weight in Hanwoo steers. However it remains unclear whether such differences are the results of stocking density or group size, or a combination of both. Nonetheless, these results confirm previous studies reporting a negative effect of increased stocking density on animal productivity. Further, animal welfare under an intensive farming system in relation to economical return is discussed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.6019-6023
• /
• 2013

Lung cancer, one of the leading causes of cancer-related deaths, usually appears as solitary pulmonary nodules (SPNs) which are hard to diagnose using the naked eye. In this paper, curvelet-based textural features and clinical parameters are used with three prediction models [a multilevel model, a least absolute shrinkage and selection operator (LASSO) regression method, and a support vector machine (SVM)] to improve the diagnosis of benign and malignant SPNs. Dimensionality reduction of the original curvelet-based textural features was achieved using principal component analysis. In addition, non-conditional logistical regression was used to find clinical predictors among demographic parameters and morphological features. The results showed that, combined with 11 clinical predictors, the accuracy rates using 12 principal components were higher than those using the original curvelet-based textural features. To evaluate the models, 10-fold cross validation and back substitution were applied. The results obtained, respectively, were 0.8549 and 0.9221 for the LASSO method, 0.9443 and 0.9831 for SVM, and 0.8722 and 0.9722 for the multilevel model. All in all, it was found that using curvelet-based textural features after dimensionality reduction and using clinical predictors, the highest accuracy rate was achieved with SVM. The method may be used as an auxiliary tool to differentiate between benign and malignant SPNs in CT images.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.1
• /
• pp.67-81
• /
• 2016

In order to examine the variation characteristics of chemical compositions in accordance with the different meteorological conditions, $PM_{10}$ and $PM_{2.5}$ were collected at Gosan site of Jeju Island in 2014, and then their ionic and elemental species were analyzed. The concentrations of nss-$SO{_4}^{2-}$ and $NH_4{^+}$ were respectively 4.3 and 3.3 times higher in fine particle mode ($PM_{2.5}$) compared to coarse particle mode ($PM_{10-2.5}$), however $NO_3{^-}$ concentration was 1.6 times higher in coarse mode compared to fine particle mode. During Asian dust days, the concentrations of nss-$Ca^{2+}$ and $NO_3{^-}$ increased highly as 7.7 and 4.5 times in coarse particle mode, and 3.0 and 4.9 times higher in fine particles, respectively. Especially, the concentrations of the crustal species (Al, Fe, Ca, K, Mn, Ba, Sr, etc.) indicated a noticeable increase during the Asian dust days. For the haze days, the concentrations of secondary pollutants increased 2.2~2.7 and 2.9~6.0 times in coarse and fine particles, respectively, and they were 0.8~1.1 and 1.8~2.4 times, respectively, during the mist days. The aerosols were acidified largely by sulfuric and nitric acids, and neutralized mainly by ammonia in fine particle mode during the haze days, but neutralized by calcium carbonate in coarse particle mode during the Asian dust days. The clustered back trajectory analysis showed that the concentrations of nss-$SO{_4}^{2-}$, $NO_3{^-}$, and $NH_4{^+}$ were relatively high when the inflow pathway of air mass was from the southern part of China.

• Journal of Korean Society of Forest Science
• /
• v.94 no.4 s.161
• /
• pp.243-251
• /
• 2005

This study was carried out to evaluate precipitation, geological and topographical factors from the landslide area occurred in Maeri, Sangdong-myeon, Gimhaesi, Gyeongsangnam-do. The landslide was affected by geo-topographical factors. Talus which is infiltrated easily by runoff was widely distributed in the landslide area. Concave areas on back- and toe-slope were built up colluvial materials and weathered soils. The colluvial materials were consisted of less weathered pebbles and stones (diameter: 10~100 cm) which are easily infiltrated during rainfall events. Also the landslide was mainly affected by an ascending of ground water table which is low in summit and high in toe-slope due to geo-topographical characteristics of the landslide area. The most important reason of the landslide was a lacking of drainage system of ground water despite the high infiltration rates of ground water in talus area during rainfall events.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1544-1550
• /
• 2008

The retinoids (vitamin A and its derivatives) play a critical role in vision, growth, reproduction, cell differentiation and embryonic development. Using the IMpRH panel, porcine cellular retinol binding protein genes 5 and 7 (RBP5 and RBP7) were assigned to porcine chromosomes 5 and 6, respectively. The complete coding sequences (CDS) of the RBP5 and RBP7 genes were amplified using the reverse transcriptase polymerase chain reaction (RT-PCR) method, and the deduced amino acid sequences of both genes were compared to human corresponding proteins. The mRNA distributions of the two genes in adult Wuzhishan pig tissues (lung, skeletal muscle, spleen, heart, stomach, large intestine, lymph node, small intestine, liver, brain, kidney and fat) were examined. A total of nine single nucleotide polymorphisms (SNPs) were identified in two genes. Three of these SNPs were analyzed using the polymerase chain reaction-restriction-fragment length polymorphism (PCR-RFLP) method in Laiwu, Wuzhishan, Guizhou, Bama, Tongcheng, Yorkshire and Landrace pig breeds. Association analysis of genotypes of these SNP loci with economic traits was done in our experimental populations. Significant associations of different genotypes of $RBP5-A/G^{63}$, $RBP5-A/G^{517}$ and $RPB5-T/C^{intron1-90}$ loci with traits including maximum carcass length (LM), minimum carcass length (LN), marbling score (MS), back fat thickness at shoulder (SBF), meat color score (MCS) and hematocrit (HCT) were detected. These SNPs may be useful as genetic markers in genetic improvement for porcine production.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.487-495
• /
• 1996

The purpose of this study was to evaluate the dentofacial characteristics and the fost-treatment dentofacial changes of those treated by four premolar extractions and to investigate the factors affecting extraction decision. The sample consisted of 35 patients (27 females, and 8 males) with no more than 7.0mm crowding, diagnosed as Class I protrusion. Pre-treatment and post-treatment lateral cephalograms were evaluated. Computerized statistical analysis was carried out using SPSS/PC+ program. The results were as follows. 1. There was no significant change in skeletal pattern after treatment while there was significant change in dentoalveolar and soft tissue pattern. 2. In pre-treatment skeletal pattern, a tendency toward vertical discrepancy was found. 3. In pre-treatment dental pattern, interincisal angle was $113.11^{\circ}$, U1 to FH was $117.78^{\circ}$ and L1 to A-Pog was 7.94mm. Pre-treatment upper and lower lip position was 2.88mm and 5.43mm to E line. 4. After treatment, interincisal angle increased $14.46^{\circ}$ and upper and lower lip moved back 2.45mm and 3.2mm to E line.(p<0.001) 5. The EI was 138.71 before treatment and 148.2 after treatment.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.5 no.1
• /
• pp.75-80
• /
• 1999

The Taekwondo being a martial sports, there are higher chances for the injury to occur than the non martial sports. Therefore, this study analyze the frequency, the area, the type, and the condition of the injury which are prone to occur in the Taekwondo matches; it is to help the Taekwondo players in prevention of the injury and in treatment. The subjects of this study were the 48 players (male 24, female 24) who participated in the final selection contest of the national team player on March 9 to 12, 1993. The data of the injury were obtained from the medical recoder staff and were analyzed to the frequency of the injury per match, the vulnerable area of the injury, the type of injury, and the condition of the injury with a gender difference. There were 24 matches for the male and 24 matches for the female, total 48 matches. Therefore, the total participation number of the players are the double of the match number. 1. The frequency of the injury per match was 18.3%(11/60) for male and 23.1%(12/52) for women. 2. The areas of the injury were ankle 36.4%(4), foot 18.2%(2), knee 18.2%(2), lower leg 18.2%(2), wrist 9.1%(1) in male; foot 33.4%(4), ankle 16.7%(2), knee 16.7%(2), lower back 16.7%(2), lower leg 8.3%(1), face 8.3%(1) in female. 3. The types of the injury were contusion 45.5%(5), sprain 27.3%(3), abrasion 9.1%(1), laceration 9.1%(1), tendon rupture 9.1%(1) in male; contusion 33.3%(4), sprain 33.3%(4), abrasion 16.7%(2), subcutaneous hemorrhage 8.3%(1), dislocation 8.3%(1) in female. 4. The condition of the injury were the unblocked attack 36.4%(4), attacking kick 27.3%(3), blocking a kick 18.2%(2), attacking punch 9.1%, impact with surface 9.1%(1) in male; attacking kick 33.3%(4), unblocked attack 25%(3), blocking a kick 25%(3), attacking punch 8.3%(1), impact with surface 8.3%(1) in female. This study shows that the injury from the Taekwondo matches occurred most in the lower extremity joints and the foot, and shows that the most of the injury types were contusion and sprain. Therefore, it is believed to be helpful to wear the proper fitting ankle or the knee protector and using other protective equipment to prevent the sports injury in the Taekwondo matches.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.5
• /
• pp.412-418
• /
• 2010

Objective : To evaluate the clinical and radiological outcomes of lumbar interbody fusion and its correlation with various factors (e.g., age, comorbidities, fusion level, bone quality) in patients over and under 65 years of age who underwent lumbar fusion surgery for degenerative lumbar disease. Methods : One-hundred-thirty-three patients with lumbar degenerative disease underwent lumbar fusion surgery between June 2006 and June 2007 and were followed for more than one year. Forty-eight (361%) were older than 65 years of age (group A) and 85 (63.9%) were under 65 years of age (group B). Diagnosis, comorbidities, length of hospital stay, and perioperative complications were recorded. The analysis of clinical outcomes was based on the visual analogue scale (VAS). Radiological results were evaluated using plain radiographs. Clinical outcomes, radiological outcomes, length of hospital stay, and complication rates were analyzed in relation to lumbar fusion level, the number of comorbidities, bone mineral density (BMD), and age. Results : The mean age of the patients was 61.2 years (range, 33-86 years) and the mean BMD was -2.2 (range, -4.8 to -2.8). The mean length of hospital stay was 15.0 days (range, 5-60 days) and the mean follow-up was 23.0 months (range, 18-30 months). Eighty-five (64.0%) patients had more than one preoperative comorbidities. Perioperative complications occurred in 27 of 133 patients (20.3%). The incidence of overall complication was 22.9% in group A, and 18.8% in group B but there was no statistical difference between the two groups. The mean VAS scores for the back and leg were significantly decreased in both groups (p < 0.05), and bony fusion was achieved in 125 of 133 patients (94.0%). There was no significant difference in bony union rates between groups A and B (91.7% in group A vs. 95.3% in group B, p = 0.398). In group A. perioperative complications were more common with the increase in fusion level (p = 0.027). Perioperative complications in both groups A (p = 0.035) and B (p = 0.044) increased with an increasing number of comorbidities. Conclusion : Elderly patients with comorbidities are at a high risk for complications and adverse outcomes after lumbar spine surgery. In our study, clinical outcomes, fusion rates, and perioperative complication rates in older patients were comparable with those in younger populations. The number of comorbidities and the extent of fusion level were significant factors in predicting the occurrence of postoperative complications. However, proper perioperative general supportive care with a thorough fusion strategy during the operation could improve the overall postoperative outcomes in lumbar fusion surgery for elderly patients.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.210-218
• /
• 2018

In order to generate meshes automatically for finite element analysis of complex structures such as aircraft, a large number of triangular elements are typically created. However, triangular elements are less accurate than rectangular elements, so it is difficult to obtain a reliable solution. This problem can be improved through the meshfree method using the back cell integration. However, this method also causes some problems such as over-use of the integration points and inefficiency of the integral domain. In order to improve these problems, a method of performing integration by setting the integral area based on a node basis has been proposed, but in the case of incompressible material problems, the numerical accuracy deteriorates due to the vibration phenomenon of the solution. Therefore, in this paper, the modified meshfree method is proposed which sets the integral domain as an element domain instead of the nodal domain, and the proposed method improves the numerical instability caused by the conventional meshfree method without decreasing the accuracy regardles of the shape of integral domain. The effectiveness of the modified meshfree method is verified by using 2-D examples.