• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1519-1521
• /
• 2007

In this work, a coplanar-type plasma flat fluorescent lamp having cross type of electrode was fabricated by screen printing and sealing technique. Cross type of electrode with a dielectric layer were screen-printed on a rear glass plate, and then fired at $550^{\circ}C$. Phosphor was printed on and fired at $450^{\circ}C$. Finally, the lamp was sealed by frit glass at $450^{\circ}C$. The lamp of cross electrode type was studied depending on the electrode gap and the thickness of dielectric layer.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1038-1041
• /
• 2002

In this paper, we have proposed a novel trench electrode Base Resistance Thyristor(BRT) and trench electrode BRT with a intrinsic region. A new power BRTs have shown superior electrical characteristics including snab-back effect and forward blocking voltage more than the conventional BRT Especially, the trench electrode BRT with intrinsic region has obtained high blocking voltage of 1600V. The blocking voltage of conventional BRT is about 400V at the same size. Because the breakdown mechanism of BRT is avalanch breakdown by impact ionization, the trench electrode BRT with intrinsic region has suppressed impact ionization, effectively. If we use this principle, we can develope super high voltage power device and applicate to another power device including IGBT, EST and etc,

• 한국재료학회지
• /
• 제19권1호
• /
• pp.7-12
• /
• 2009

TFT-LCD is the most popular type of flat display panel in the information technology field. The back light unit is a main part of the structure of a TFT-LCD panel. Occasionally, studies have shown that failures of the CCFL of the BLU occur due to the poor weld characteristics of these materials. The aim of this study was to prepare some technical data and to characterize a microjoined electrode for the CCFL. Microstructure examinations, microhardness measurements, resistance measurements and microtensile tests of the microjoined electrode were carried out. The result indicates that a large amount of grain coarsening exists in the heat-affected zone (HAZ) of the weld between the cup and the pin. This grain coarsening of the HAZ between the cup and pin is caused by the welding cycle, which may have an influence on the lowest microhardness values. Fracturing of the microjoined electrode also occurred at the HAZ close to the cup between the weld holding the cup and the pin. Additionally, no specific changes of the electrical resistance among the cup, pin, and lead wire themselves or in the microjoined electrode were observed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.594-597
• /
• 2002

We studied the effect of secondary electron emission from the back plate of AC-PDP, on the ramp waveform driving of the system, using two-dimensional PDP cell discharge simulator. It is found that the secondary electron emission from back plate plays a significant role in getting a stable weak discharge during the ramping up of X-Y electrode voltage. This is because grounded address electrode acts as a cathode during the setup of surface charge, and the secondary electron emission from phosphor in the back plate must be large enough to accumulate surface charges on the dielectric layers without strong plasma discharge. We have concluded that the secondary electron emission coefficient(${\gamma}$) of phosphor, besides MgO, must be known to understand the characteristics of the PDP system. A few suggestions for improvement of the system is also made and tested.

• The Korean Journal of Pain
• /
• 제20권2호
• /
• pp.199-202
• /
• 2007

Failed back surgery syndrome (FBSS) is a condition characterized by extreme pain after spinal surgery. Treatment of FBSS is aimed at improving function, using interdisciplinary approaches that encompass rehabilitation, psychological therapy, and pain management. If no response to conventional treatment is noted, a more interventional technique such as spinal cord stimulation (SCS) should be used. SCS is a well-established method of managing a variety of chronic neuropathic pain conditions. A 32 year-old male patient afflicted by FBSS that was irresponsive to both medication and several repeated nerve blocks showed improvement of symptoms after cervical and thoracic SCS with a single electrode. Centered on the midline of the spinal cord, single-electrode SCS can be an effective method for relieving pain and improving function.

• 대한치과의사협회지
• /
• 제17권8호통권123호
• /
• pp.627-631
• /
• 1979

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1596-1597
• /
• 1998

This study is an experiment using the non-thermal plasma for removal of NOx, SOx. This experimental setup is made up the superposing discharge electrode in order to increase the removal. Both electrode are plate and niddle electrode, back of plate installed the lower electrode making pure silver. The result of the superposing discharge is thought that the rate of removal increase by means of rising effect. This is studied the property to the U.V irradiation and temperature dependence of the flue gas.

• Corrosion Science and Technology
• /
• 제2권5호
• /
• pp.243-246
• /
• 2003

We have used a plasma etching method in order to develop a concave-type Pt electrode capacitor to overcome the limitation of conventional stack-type capacitor in a small critical-dimension (CD) pattern. We have deposited Pt layer on the concave-type structure made by patterning of $SiO_2$ and subsequently we separated the adjacent nodes by etch-back process with photoresist (PR) as a protecting layer.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.715-719
• /
• 2009

본 연구에서는 DNA 정보를 상변화 물질의 전기저항 변화특성으로 검출할 수 있는 상변화 전극 기판을 개발하였다. 이를 위해 반도체 공정에서 사용하는 Al을 사용하여 전극 기판을 제작하였다. 하지만 주사전자현미경을 이용하여 Al 전극의 단면 상태를 확인해 본 결과 PETEOS(plasma enhanced tetraethyoxysilane) 내에서 보이드(void)가 발생하여 후속공정인 에치백과 세정공정 분위기에 과도하게 노출되어 심하게 손상되어 전극과 PETEOS 사이에 홀(hole)로 변형된다. 이 문제점을 해결하기 위하여 에치백 및 세정 공정을 진행하지 않으면서 $Ge_2Sb_2Te_5$(GST) 박막의 단차피복성(stepcoverage)을 좋게 할 수 있고, 열역학적으로 GST 박막과의 반응성을 고려했을 때 안정적이면서 비저항이 낮은 TiN 재료를 사용하여 상변화 전극 기판을 제작하였다. 주사전자현미경을 통하여 전극의 단면의 상태를 관찰하였으며 TiN 전극과 GST 박막이 정상적으로 연결되어 있는 것을 확인하였다. 또한 저항측정 장비를 사용하여 TiN 상변화 전극 기판 위에 증착된 GST의 비정질과 결정질의 저항을 측정하였고, GST의 비정질과 결정질저항의 차이는 약 1,000배 정도로 신호를 검출하는데 충분함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.262-263
• /
• 2005

Pt counter electrode based on flexible metal for dye-sensitized solar cells(DSCs) has been investigated. Photovoltaic structures on lightweight substrates have several advantages over the heavy glass-based structures in both terrestrial and space applications. Cyclic voltammetry and impedance spectroscopy were used to investigate electrochemical properties of Pt counter electrode both FTO glass and SUS sheet substrate. The DSCs composed of the counter electrode based on a stainless steel substrate has obtained conversion efficiencies comparable to that based on the conducting glass. The counter electrode based on the stainless steel substrate has the merit of improving the fill factor and conversion efficiency of the DSCs by reducing its internal resistance.