• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.245-249
• /
• 2004

This paper describes the vibration characteristics of Nd:YAG laser welding plates analyzed time-average Electronic Speckle Pattern Interferometry(ESPI). In laser welding, the travel speed has influence on a mechanical properties, such as elastic modules, response frequencies and so on, which is resulted on a residual stress of the welding zone. the response frequencies related to elastic modules are determined by time-average ESPI and the results, as compared to each condition, are used to estimate optimal condition of travel speed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.330-337
• /
• 1998

A duty cycle average model is mathematically developed for an average model of buck converter employing hysteresis c control. The derived model is able to simultaneously deal with both the continuous conduction mode (CCM) and the d discontinuous conduction mode (DCM) in the time domain. Also. taking advantage of the MAST language of SABER. a t template of the proposed duty cycle average model is built for the time and frequency domain analyses. The accuracy of t this template is verified through the computer simulations.

• Journal of Information Processing Systems
• /
• v.10 no.3
• /
• pp.429-442
• /
• 2014

In this paper, we investigated the use of seasonal autoregressive integrated moving average (SARIMA) time series models for fault detection in semiconductor etch equipment data. The derivative dynamic time warping algorithm was employed for the synchronization of data. The models were generated using a set of data from healthy runs, and the established models were compared with the experimental runs to find the faulty runs. It has been shown that the SARIMA modeling for this data can detect faults in the etch tool data from the semiconductor industry with an accuracy of 80% and 90% using the parameter-wise error computation and the step-wise error computation, respectively. We found that SARIMA is useful to detect incipient faults in semiconductor fabrication.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.1
• /
• pp.85-89
• /
• 2007

Many authors considered the computational aspect of sup-min convolution when applied to weighted average operations. They used a computational algorithm based on a-cut representation of fuzzy sets, nonlinear programming implementation of the extension principle, and interval analysis. It is well known that $T_W$(the weakest t-norm)-based addition and multiplication preserve the shape of L-R type fuzzy numbers. In this paper, we consider the computational aspect of the extension principle by the use of $T_W$ when the principle is applied to fuzzy weighted average operations. We give the exact solution for the case where variables and coefficients are L-L fuzzy numbers without programming or the aid of computer resources.

• Journal of Engineering Education Research
• /
• v.14 no.6
• /
• pp.16-23
• /
• 2011

As a basic study on an effective operation of EMIs (English Medium Instructions) gradually expanded by social needs, the research analyses the effects of English competence, motivation, achievement, and self-confidence on learners' satisfaction and cognition of effects of EMI. Sixty-seven students (55 male and 12 female students) of the department of Civil Engineering in University A participated in the research. First, the analysis results indicate that participants evaluated their own English competence and self-confidence below average but evaluated English motivation and achievement above average. Second, participants' satisfaction with EMI was above average but they cognized its effects below average. Third, English motivation and self-confidence influenced on learners' satisfaction and cognition of effects of EMI in a meaningful way. Especially, English self-confidence influenced relatively more on the two dependent variables. Based on those result, the implications were suggested.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.1
• /
• pp.29-39
• /
• 1993

A model for estimating daily effective rainfall of upland crops was developed. The infiltration process was described by Green-Ampt infiltration model developed by Chu(1978). The model considers delayed surface ponding and surface detention storage under a uniform soil profile. The Green-Ampt parameters, that is, average hydraulic conductivity and average capillary pressure head on a sandy loam soil were determined from field experiment using Air-entry permeameter developed by Bouwer(1966). The model was verified by comparing measured and simulated surface runoff. The ratios of effective rainfall to total rainfall for red pepper, soybean, sesame and Chinese cabbage were evaluated using Borg's root growth model( 1986) respectively. The followings are a summary of this study results; 1.In a sandy loam soil average hydraulic conductivity was 3.28cm/hr and average capillary pressure head was 3.00cm. 2.The root growth of upland crops could be expressed by Borg's root growth model successively. 3.The measured and simulated surface runoff was agreed well with each other. 4.As the rainfall amount was increased, the ratio of effective rainfall to total rainfall was decreased exponentially till a certain growing period.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.147-154
• /
• 2013

PURPOSES: To analyze the specific factors of drivers behaviors that amount of cause the greenhouse gas emissions per vehicle. METHODS: Drivers behaviors at intersections are analyzed on the conditions of acceleration and deceleration. RESULTS : First, it is resulted greenhouse gas emissions per vehicle is produced more at intersections than at the main lines of highway. Second, it is resulted that the average speed, the average acceleration rate and the maximum speed are three major factors to produce greenhouse gas per vehicle in acceleration sections. Third, it is resulted that rapid deceleration 20m before entering intersections is the major factor to produce greenhouse gas per vehicle in deceleration sections. CONCLUSIONS: At intersections, sudden acceleration and deceleration is not good for greenhouse gas emissions. Thus, and the average speed, the average acceleration rate and the maximum speed are the chosen as factors to be controlled for drivers' behavior to reduce vehicles' greenhouse gas at intersections.

• Korean Journal of Veterinary Research
• /
• v.16 no.2
• /
• pp.115-119
• /
• 1976

The survey was carried out to investigate the average number of days from parturition to conception to 349 calving cases out of Holstein cows in total 154 heads observed. The results were as follows: 1. The average number of days from parturition to conception was $97.41{\pm}8.22$ and it's similar during the period from primipara to 4th calving order, and irregular during on and after 5th. 2. The average number of days from parturition to conception in calving month was observed all through the year: the prolongation among on April and July, and the brief duration among on January and March. 3. In the cases under 50 and 150 days after delivery, the distribution showed 53.56% and 83.91%, respectively, and it's about 20% between 70 and 90 days after delivery.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.4
• /
• pp.266-274
• /
• 1997

To understand seawater exchange are important to analyze the formation of watermass, material circulation and transfer of pollutant material etc. The purpose of this study is to review the previous studies and to propose new exchange ratio. where,$C_1$ ; average salinity of the water at low water$C_2$ ; average salinity of the water at the next low water$C_0$ ; average salinity of the water passing the bay mouth on the flood tide$V_2$ ; total water volume of the bay on the low water$V_0$ ; the volume of the remaining outer bay water entering during the flood tideSeawater exchange ratio of Dongho Bay calculated by new method are 26.1%, 23.8% respectevely.The average fresh water residence ratio calculated by equation (12) is 2.2 days, that is corresponding 23.5 % of exchange ratio. Thus, it appears similar result as proposed exchange ratio.

• The Journal of the Korean dental association
• /
• v.12 no.3
• /
• pp.177-182
• /
• 1974

The 800 extracted permanent teeth of first and second molar were observed and obtained the following results; Those teeth were extracted from the population of dentistless rural area. The cause of extraction of those teeth was only the dental caries. It was performed by the free dental service team from 1966 to 1972. The findings were as follows: 1. The most incidence of caries occurrence was on the occlusal surface and the least was lingual surface. 2. The distal surface caries rate was higher than the other surface except occlusals. 3. The average rate of decayed surface was higher in the second molar group than the first molar. 4. The average rate of dacayed surface was higher in the teeth of mandible than maxilla. 5. The average rate of decayed surface was higher in female than male. 6. The average rate decayed surface per tooth was 2.54±1.98.