• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.217-223
• /
• 1996

In order to evaluate the changes before and after secondary operations in the patients with cleft lip objectively using full face photographs, the author analyzed results of improvement on nasal width and mouth width and asymmetry of nostril. 1. The ration of asymmetry of thenostril is changed from average 1.24 preoperatively to average 1.08 postoperaively : 61.2% is improved postoperatively. 2. The ratio of nasal width compared with intermedial canthal distance is changed from average 1.15 preoperatively to average 1.10 postoperatively : 3.8% is reduced posteroperatively. 3. The ratio of mouth width compared with intermedial canthal distance is changed from average 1.08 preoperatively to average 1.03 postoperathvely : 4.1% is reduced posteroperatively.

• Journal of Korean Clinical Health Science
• /
• v.2 no.1
• /
• pp.17-23
• /
• 2014

Purpose. This study was to investigate the relationship between the palpebral fissure size and the exophthalmos in a population of Korean adult women subjects with normal eye status. Methods. From November 2012 to September 2013, The authors analyzed the morphological values in 73 Korean adults population. The test was performed using the Hertel exophthalmometer and verner califer. Analysis of subjects data were recorded using the spss version 20.0 a statistical program (IBM Co, Armonk, NY USA). Results. The average age of the 73 subjects (146 eyes) was (21.219+/-0.261)mm. the average value of palpebral fissure was (25.110+/-1.646)mm in width and (8.096+/-1.464)mm in height. The average value of exophthalmos was (15.002+/-1.922)mm. There was a significant relationship(P>0.05) in the average size between the width and height in palpebral fissure. Also, there was a significant relationship(P>0.05) in the average size between the palpebral fissure width and exophthalmos. On the other hand, there was a significant relationship(P>0.01) in the average size of palpebral fissure height and exophthalmos. Conclusions: In this study, these results suggested that the palpebral fissure and exophthalmos had a significant relationship in the average value of size in Korean adult women population.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.227-232
• /
• 2002

This paper describes a calculation of an average crack spacing and the maximum crack width for the high-strength concrete tensile and flexural members. Based on the uniform bond stress distribution of the average steel and concrete strains over the transfer length, the crack spacing and the crack width are proposed to utilize influence of the concrete strength and the cover thickness. This analytical results presented in this paper indicate that the proposed equations can be more effectively estimated the maximum crack width and the average crack spacing of the reinforced concrete flexural and tensile members.

• Journal of Biosystems Engineering
• /
• v.19 no.1
• /
• pp.9-16
• /
• 1994

135 and 136 pine cones were sampled from age class of II to VI Korean pine trees for the study of their physical properties in 1991 and 1992, respectively. The length, width, weight, volume, and the largest projected area of cones were measured, and the specific gravity, apparent volume ratio sphericity, and roundness were calculated. Regression analysis were performed for the weight, volume, and projected area to the cone length and width. The length, and major and minor diameters of the cone stalks were measured and analyzed. 1. The range of the length of cone stalks was 0 to 47.3mm. The average length of stalks were 9mm ('91) and 10mm('92), respectively. Cross section of the stalks was ellipse with average major and minor diameters of 9.1mm and 10.1mm, and 8.6 and 8.7mm in 91 and 92, respectively. 2. The length of pine cones distributed from 8cm to 17cm and the average length were about 13cm('91, '92). The width varied from 5cm to 9.5cm and the average width were 6.7cm('91) and 6.9cm('92). The ratios of the length to the width were 0.56('91) and 0.65('91) and the shape of the cones were found to be ellipse with minor diameter of 1/2 to 2/3 of the major diameter. 3. The roundnesses and sphericity of cones were 0.74 and 0.75('91), 0.63 and 0.67('92), respectively. The average of the largest projected area of cones were $85.3cm^2$('91) and $93.1cm^2$('92) and the criterion areas were $71.0cm^2$ and $74.5cm^2$, respectively. 4. Cone weights were from 83g to 467g('91 and '92) and averages were 186g('91) and 220g('92). The average specific gravities were 0.89 and 0.96('91 and '92). The true volumes were $212cm^2$('91) and $230cm^2$('92), and the average bulk volume was $321cm^2$('91, '92). The average apparent volume ratios of cones were 35% ('91) and 28% ('92), respectively. 5. The weight and the volume were proportional to the length of the cone multiplied by the width squred and the largest projected area was proportional to the length multiplied by the width of cones.

• International Journal of Highway Engineering
• /
• v.20 no.2
• /
• pp.87-96
• /
• 2018

PURPOSES : The purpose of this study is to compare the consistency of widths by analyzing the current situation of the sidewalk in Korea and Japan Neighborhoods Area. METHODS : Literature on the sidewalk width of the Neighborhood Area is reviewed to compare the consistency of width. Through on-site surveys, We identify the current status of sidewalk in Korea and Japan. This compares the sidewalk width consistency in the Neighborhood Area. RESULTS : The width of whole sidewalks in Japan is ranged 330~445cm, which is lAvger than The width of whole sidewalks in Korea, ranged 237~420cm. Frontage Zone width is ranged 60~65cm in Japan, similar to 60cm in Korea. However, in Korea, there is a lAvge difference between Frontage Zone width and walking width average, and the standard deviation of width is lAvger than Japan. The Pedestrian Zone width is ranged 172~325cm in Japan, which is lAvger than ranged 0~295cm in Korea. The width of the Furniture Zone is ranged 135 ~ 331cm in Japan and lAvger than ranged 90~225cm in Korea. In Korea, the difference between the Furniture Zone width and the walking average width is small, and the standard deviation of width is smaller than that of Japan. CONCLUSIONS : In conclusion, the standard deviation of the frontage zone and the pedestrian zone width, which are included in the valid sidewalk width, The Korea is lAvger than in Japan. valid sidewalk width of Korea sidewalk is inconsistent. valid sidewalk width for wheelchair users does not meet the width of more than 2 meters.

• Journal of radiological science and technology
• /
• v.1 no.1
• /
• pp.69-73
• /
• 1978

This study was conducted in order to determine width, length of lung by radiographic method. The measurements carried out on normal chest X-ray film of 1,036 persons who took the radiograph from the April of 1977 to the June of 1978. As a result of this study, the following conclusions were obtained: 1. In the case of male, the average width, and length of both side lung size from new birth to nineteen of age was larger than female with the exception of partly age group. 2. Lung size in average width at adult was from 27.60cm to 29.20cm and female was 25.10cm to 26.22cm. 3. The mean length of left lung at adult was from 26.32cm to 25.27cm in female. 4. The average length of right lung at adult was from 25.8cm to 28.35cm in male and female was from 24.86cm to 25.17cm. 5. It was found that lung sige in width and length was slightly increased until 39 years of age, but was trend to decrease it of lung in the age of 40 years old. 6. In the case of adult, the difference of the average length between right and left lung, the length of right lung was slightly shorter than left that.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.6
• /
• pp.743-752
• /
• 1998

Experiments were performed to characterize single-phase heat transfer behavior of submerged liquid jet with multiple nozzle normally impinging on the smooth and extended surfaces. Arrays of 9 and 36 nozzles were used, with diameters of 0.5 to 2.0mm providing nozzle area ratio (AR) from 0.05 to 0.2. The square pin fin arrays were chosen as extended surfaces and the effects of geometrical parameters such as fin height, the ratio of fin width to channel width on heat transfer enhancement were examined. Single nozzle characteristics were also evaluated for comparison. The results clearly showed that heat transfer enhancement could be realized by using multiple nozzles at the constant volume flow rate. The average Nusselt number of multiple nozzle impingement on the smooth surface was correlated by the following equation : Nu/$Pr\frac{1}{3}=0.94 Re^{0.56}N^{-0.12}AR^{0.50}$The average heat transfer coefficients of multiple nozzle impingement on the extended surfaces decreased with increasing fin height and the ratio of fin width to channel width. The effectiveness of ex-tended surfaces ranged from 1.5 to 3.5 depending on the fin height, the ratio of fin width to channel width of pin fin arrays, nozzle number and nozzle area ratio.

• Carbon letters
• /
• v.13 no.4
• /
• pp.236-242
• /
• 2012

Poly(vinylidene chloride) (PVDC)-derived nanoporous carbons were prepared by various activation methods: heat-treatment under an inert atmosphere, steam activation, and potassium hydroxide (KOH) activation at 873, 1073, and 1273 K. The pore structures of PVDC-derived nanoporous carbons were characterized by the $N_2$ adsorption technique at 77 K. Heat treatment in an inert atmosphere increased the specific surface area and micropore volume with elevating temperature, while the average micropore width near 0.65 nm was not significantly changed, reflecting the characteristic pore structure of ultramicroporous carbon. Steam activation for PVDC at 873 and 1073 K also yielded ultramicroporosity. On the other hand, the steam activated sample at 1273 K had a wider average micropore width of 1.48 nm, correlating with a supermicropore. The KOH activation increased the micropore volume with elevating temperature, which is accompanied by enlargement of the average micropore width from 0.67 to 1.12 nm. The average pore widths of KOH-activated samples were strongly governed by the activation temperature. We expect that these approaches can be utilized to simply control the porosity of PVDC-derived nanoporous carbons.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.4
• /
• pp.257-261
• /
• 2001

Nonlinear pulse width modulation (PWM) controlled system is considered to achieve control performance of thruster controlled spacecraft. The actual PWM controlled motions occur, very closely, around the average model trajectory. Furthermore nonlinear PWM controller design can be directly applied to thruster controlled spacecraft to determine thruster on-time. Sliding mode control for attitude tracking of three-axis thruster-controlled spacecraft is presented. Simulation results are shown which use modified Rodrigues parameters and sliding mode control law to achieve attitude tracking of a three-axis spacecraft with thrusters.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.166-182
• /
• 1998

The purposes of this study are to evaluate the Korean mandibular dental arch and classify the mandibular dental arch shape and size based on the incisal angle, canine angle, inter second molar width and height. In this study the mandibular study models were fabricated using irreversible hydrocolloid impression material from 225 volunteers with a mean age 23.62 (range 19-29). And the study models were measured with 3-dimensional measuring device and the mandibular dental arch was classified by means of K-means clustering method and visual inspection, then obtained data were analyzed with t-test for the statistical analysis. The results were as follows ; 1. The average canine height was 5.19mm(s.d. 1.17) in both sex, 5.34mm in male, and 4.95mnm in female. And the sexual difference was significant($0). 2. The average second molar height was 39.81mm(s.d. 2.44) in both sex, 40.19mm in male, and 39.21mm in female. And the sexual difference was significant($0). 3. The average inter-canine width was 27.16mm(s.d. 1.78) in both sex, 27.41mm in male, and 26.77mm in female. And the sexual difference was significant($0). 4. The average inter-first molar width was 46.93mm(s.d. 2.67) in both sex, 47.72mm in male, and 45.7mm in female. And the sexual difference was significant($0). 5. The inter-second molar width was average 56.09mm(s.d. 3.01) in both sex, 57.24mm in male, and 54.32mn in woma. And the sexual difference was significant($0). 6. The arch form was classified into three shapes based on the incisal and canine angle. V-shape showed $124.88^{\circ}$ of incisal angle and $141.64^{\circ}$ of canine angle, U-shape showed $152.76^{\circ}\;and\;125.35^{\circ}$, and O-shape showed $138.03^{\circ}\;and \;33.66^{\circ}$ respectively. Each shape distribution was that the V-shape was 14.2%, the U-Shape was 14.7%, and the O-shape was 71.1% of the 225 study models. 7. It was thought that the use of second molar width is more reasonable than height for classifying the dental arch size. The arch size was classified into four sizes based on the second molar width. Size 1 showed range of 42.24-48.23mm, size 2 showed 48.24-54.23mm, size 3 showed 54.24-60.23mm, and size 4 showed 60.24-66.23mm respectively. Each arch size distribution was that the size 1 was 1.3%, the size 2 was 27.1%, the size 3 was 63.6%, and the size 4 was 8.0% of the 225 study models.