• 한국공작기계학회논문집
• /
• 제14권2호
• /
• pp.21-26
• /
• 2005

From on the machining center cutting work of 5534, the characteristics such as spindle speed and feed speed fir the third point height, average spacing of roughness peaks, bearing ratio, center line average, ten point height. experiments is roughness for sampling length determine to measuring length of cutting feed speed 200, 400, 600, 800mm/min and spindle speed 800, 1000, 1200, 1400rpm. Third point height is spindle speed with most suitable cutting condition 1000rpm. Third point height is feed speed with most suitable cutting condition 400mm/min. Average spacing of roughness peaks are spindle speed with most suitable cutting condition feed speed increased to average spacing of roughness Peaks are increased. Spindle speed increased to average spacing of roughness peaks are decreased. Bearing ratio is spindle speed with feed speed increased to bearing ratio decreased. Center line average is spindle speed with most suitable cutting condition at 1200rpm feed speed with most suitable cutting condition at 200mm/min to cutting foe roughness suddenly decreased. Ten point height is spindle speed with most suitable cutting condition 1200rpm at ten point height cutting face roughness to decreased and feed speed with most suitable cutting condition 800mm/min at ten point height cutting face roughness to decreased.

• Journal of information and communication convergence engineering
• /
• 제8권1호
• /
• pp.29-34
• /
• 2010

Wind speed and wind direction are usually taken using two parameters: wind speed and wind direction. This paper studies the average wind speed and direction calculation methods. The paper first introduces to basic wind's knowledge, and then presents several methods in calculating average wind speed and direction. Lastly some graphs are plotted base on these computational methods and the implementation of these methods in an actual buoy system.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제18권1호
• /
• pp.31-40
• /
• 2014

Working with dynamic visual representations can help students-with-computer discover new mathematical ideas. Students translate among multiple representations as a strategy to investigate non-routine problems to explore possible solutions in mathematics classrooms. In this paper, we use the area models as new representations for our secondary students to investigate three problems related to the average speed of a particle. Students show their ideas in the process of investigating arithmetic mean, harmonic mean, and average speed through their created dynamic figures. These figures really utilize dynamic geometry software.

• 한국콘텐츠학회논문지
• /
• 제15권4호
• /
• pp.510-518
• /
• 2015

기상조건이 교통 상황에 미치는 영향은 이미 알려진 사실이나 관련 연구는 부족한 실정이다. 이에 본 연구에서는 일반국도 지방부 도로에서 강우 수준에 따른 속도 변화를 분석하였다. 분석결과 강우 시 평균속도는 3.2% 감소하였고 교통량이 방향별로 200대/시 이하인 경우 최대 8.8% 감소하는 것으로 분석되었다. 이는 지방부 도로의 경우 자유 교통류 상황에서의 속도가 상대적으로 크게 감소했기 때문으로 판단된다. 또한 속도-교통량 그래프를 활용하여 강우 시 속도 감소 모형을 추정하고 통계 검증을 수행하였다. 추정된 모형은 강우 수준이 높을수록 기울기가 완만해졌으며, 이는 자유 교통류 상황에서의 속도가 상대적으로 크게 감소한 결과이다.

• 대한의용생체공학회:의공학회지
• /
• 제30권3호
• /
• pp.233-240
• /
• 2009

Using a spatial compound imaging technique in a medical ultrasound imaging system, the average speed of sound in a medium of interest is measured, and imaging of its distribution is implemented. When the brightness reaches the highest level in an ultrasonic image obtained as the speed of sound used in focusing is varied, it turns out that the focusing has been accomplished satisfactorily and that the speed of sound which has been adopted becomes the sought-after average speed of sound. Because spatial compound imaging provides many different views of the same object, the adverse effect of erroneous speed-of-sound estimation tends to be more severe in compound imaging than in plain B-mode imaging. Thus, in compound imaging, the average speed of sound even in the case of speckled images can be accurately estimated by observing the brightness change due to different speeds of sound employed. Using this new method that offers spatial diversity, we can construct an image of the speed of sound distribution in a phantom embedded with a 10-mm diameter plastic cylinder whose speed of sound is different from that of the background. The speed of sound in the cylinder is found to be different from that of the surrounding medium.

• 한국재료학회지
• /
• 제21권7호
• /
• pp.396-402
• /
• 2011

In this study, by using tin chloride solution as a raw material, a nano-sized tin oxide powder with an average particle size below 50 nm is generated by a spray pyrolysis process. The properties of the generated tin oxide powder depending on the inflow speed of the raw material solution are examined. When the inflow speed of the raw material solution is 2 ml/min, the majority of generated particles appear in the shape of independent polygons with average size above 80-100 nm, while droplet-shaped particles show an average size of approximately 30 nm. When the inflow speed is increased to 5 ml/min, the ratio of independent particles decreases, and the average particle size is approximately 80-100 nm. When the inflow speed is increased to 20 ml/min, the ratio of droplet-shaped particles increases, whereas the ratio of independent particles with average size of 80-100 nm decreases. When the inflow speed is increased to 100 ml/min, the average size of the generated particles is around 30-40 nm, and most of them maintain a droplet shape. With a rise of inflow speed from 2 ml/min to 5 ml/min, a slight increase of the XRD peak intensity and a minor decrease of specific surface area are observed. When the inflow speed is increased to 20 ml/min, the XRD peak intensity falls dramatically, although a significant rise of specific surface area is observed. When the inflow speed is increased to 100 ml/min, the XRD peak intensity further decreases, while the specific surface area increases.

• 대한토목학회논문집
• /
• 제30권3D호
• /
• pp.215-222
• /
• 2010

일반적으로 평균속도란 어느 도로구간을 이동하는 차량의 평균통행시간에 기초한 통행속도를 의미하고, 도로의 서비스수준 평가를 위해 도로용량편람에서 제시하고 있는 평균통행속도가 효과척도로 사용되고 있다. 국내 대부분의 도시고속도로는 제한속도 80Km/h이하의 고속화도로로서 출퇴근시간대에 관계없이 체증문제를 안고 있다. 특히, 도시고속도로의 연결로 접속구간역내에서의 교통정체는 통행량 증가와 주변 간선도로와의 연계성이 부족하여 더욱 악화되고 있다. 따라서 본 연구의 목적은 도시고속도로의 연결로 접속구간역내에서의 교통특성을 파악하고, 파악된 교통특성을 중심으로 연결로 접속구간 내 평균속도를 추정하며, 추정된 평균속도의 타당성을 입증하는데 있다.

• International Journal of Automotive Technology
• /
• 제4권2호
• /
• pp.101-108
• /
• 2003

There are a lot of factors that influence automotive fuel economy such as average trip time per kilometer, average trip speed, the number of times of vehicle stationary, and so forth. These factors depend on road conditions and traffic environment. In this study, various driving data were measured and recorded during road tests in Seoul. The accumulated road test mileage is around 1,300 kilometers. The objective of the study is to identify the driving patterns of the Seoul metropolitan area and to analyze the fuel economy based on these driving patterns. The driving data which was acquired through road tests was analysed statistically in order to obtain the driving characteristics via modal analysis, speed analysis, and speed-acceleration analysis. Moreover, the driving data was analyzed by multivariate statistical techniques including correlation analysis, principal component analysis, and multiple linear regression analysis in order to obtain the relationships between influencing factors on fuel economy. The analyzed results show that the average speed is around 29.2 km/h, and the average fuel economy is 10.23 km/L. The vehicle speed of the Seoul metropolitan area is slower, and the stop-and-go operation is more frequent than FTP-75 test mode which is used for emission and fuel economy tests. The average trip time per kilometer is one of the most important factors in fuel consumption, and the increase of the average speed is desirable for reducing emissions and fuel consumption.

• 한국안전학회지
• /
• 제25권2호
• /
• pp.78-83
• /
• 2010

An installation of automated speed enforcement system(ASES) was known for traffic safety and accident preventive effects that traffic characteristics transmute by speed distribution stabilizing. This study is verified the variations of average speed, 85% speed, speed distribution and dispersion as traffic characteristics depend on enforcement system influences in the road. We tested selected 5 areas. By and large, it has a little differences depend on road geometric structure and traffic environment but that is not too much. After all, after automated speed enforcement system installed in all of test areas, average speed, 85% accumulated speed, speed distribution and dispersion characteristics were declined and equalized. The speed dispersion was smaller than before installed the ASES. The speed dispersion value of each case that is the limited speed has been 70Km/h, 80Km/h at flat and straight, 80Km/h at downhill and straight or downhill and left-curved area was 77.3%, 65.2%, 68.7% and 54.1%. Each of the data was declined. We could analyze that average speed distributed depletion factor was declined rapidly by 66.3% in test area.

• 대한수학교육학회지:학교수학
• /
• 제18권4호
• /
• pp.881-901
• /
• 2016

본 연구는 '시간, 거리, 속력'의 관계에 대한 학생들의 인식과 표현을 교수실험을 통하여 세밀하게 관찰한 연구이다. 이 과정에서 학생들의 '시간, 거리, 속력'의 관계에 대한 인식의 변화가 드러났으며, 학생들은 평균속력에 대하여 거리함수에서 구간의 양 끝점을 잇는 선분의 기울기라는 관점으로 인식하는 것 외에도 속력함수에서 사각형의 높이로 인식하여 '시간, 거리, 속력'을 이해하고 있음을 보여주었다. 이 과정에서 '거리=시간${\times}$속력'의 관계를 '거리=시간${\times}$평균속력'으로 확장하는 장면을 드러내었다. 본 연구는 제한된 소수 학생을 대상으로 교수실험을 진행하였지만, 학생들의 '시간, 거리, 속력'의 관계에 대한 인식과 표현의 변화 과정에 대한 관찰을 통하여 여러 시사점을 제시하였다. 이러한 연구 결과가 추후 미적분 학습 모델 구성을 위한 다양한 연구의 시발점이 되기를 기대해본다.