• 한국재료학회지
• /
• 제18권3호
• /
• pp.153-158
• /
• 2008

Fe-aluminides have the potential to replace many types of stainless steels that are currently used in structural applications. Once commercialized, it is expected that they will be twice as strong as stainless steels with higher corrosion resistance at high temperatures, while their average production cost will be approximately 10% of that of stainless steels. Self-propagating, high-temperature Synthesis (SHS) has been used to produce intermetallic and ceramic compounds from reactions between elemental constituents. The driving force for the SHS is the high thermodynamic stability during the formation of the intermetallic compound. Therefore, the advantages of the SHS method include a higher purity of the products, low energy requirements and the relative simplicity of the process. In this work, a Fe-aluminide intermetallic compound was formed from high-purity elemental Fe and Al foils via a SHS reaction in a hot press. The formation of iron aluminides at the interface between the Fe and Al foil was observed to be controlled by the temperature, pressure and heating rate. Particularly, the heating rate plays the most important role in the formation of the intermetallic compound during the SHS reaction. According to a DSC analysis, a SHS reaction appeared at two different temperatures below and above the metaling point of Al. It was also observed that the SHS reaction temperatures increased as the heating rate increased. A fully dense, well-bonded intermetallic composite sheet with a thickness of $700\;{\mu}m$ was formed by a heat treatment at $665^{\circ}C$ for 15 hours after a SHS reaction of alternatively layered 10 Fe and 9 Al foils. The phases and microstructures of the intermetallic composite sheets were confirmed by EPMA and XRD analyses.

• 한국식품과학회지
• /
• 제13권4호
• /
• pp.289-298
• /
• 1981

보리 후레이크의 수분활성도에 따른 crispness와 brittleness를 bend test와 침투시험을 행하여 기기적으로 측정하였으며 이를 관능검사 결과와 비교하였다. 또한 조직감을 기준으로 하여 상품적 가치가 유지될 수 있는 임계수분활성도를 구하 였고 이를 기초를 포장재별품질수명을 측정하였다. 힘-변형 곡선에서 crispness는 1/변형, brittleness는 1/소요된 힘으로 각각 표기될 수 있었으며 침투시험이 bend test보다 관능정사 결과와 더 잘 일치하였고, 수분활성도가 증가함에 따라 crispness와 brittleness는 감소하였고 임계수분활성도는 0,48이었다. PE film으로 포장하였을 때 조직감 만을 기준으로 한 품질수명은 평균 43일이었으며 적층 Al foil로 포장하였을 때는 9400일로 추정되었다.

• 센서학회지
• /
• 제15권4호
• /
• pp.237-244
• /
• 2006

Atomic force microscope (AFM) has become a common tool for the structural and physical studies of biological macromolecules, mainly because it provides the ability to perform experiments with samples in a buffer solution. In this study, structure of proteins and nucleic acids has been studied in their physiological environment that allows native intermolecular complexes to be formed. Cr and Au were deposited on p-Si (100) substrate by thermal evaporation method in sequence with the thickness of $200{\AA}$ and $500{\AA}$, respectively, since Au is adequate for immobilizing biomolecules by forming a self-assembled monolayer (SAM) with semiconductor-based biosensors. The SAM, streptavidin and biotin interacted each other with their specific binding energy and their adsorption was analyzed using the Bio-AFM both in a solution and under air environment. A silicon nitride tip was used as a contact tip of Bio-AFM measurement in a solution and an antimony doped silicon tip as a tapping tip under air environment. Actual morphology could also be obtained by 3-dimensional AFM images. The length and agglomerate size of biomolecules was measured in stages. Furthermore, $R_{a}$ (average of surface roughness) and $R_{ms}$ (mean square of surface roughness) and surface density for the adsorbed surface were also calculated from the AFM image.

• Journal of Biosystems Engineering
• /
• 제27권2호
• /
• pp.89-96
• /
• 2002

The trend of consumption of vegetable soybeans is increasing because they are recognized as the clean vegetable. The works requiring the most intensive labor are threshing and seperation ones, and they form about 80% of total labour for vegetable soybeans production. It is necessary to develop the vegetable soybeans-thresher for the sake of cost down of vegetable soybeans production. The purpose of this study is to acquire the basic informations to design of the vegetable soybeans-thresher. We make the experimental system which control the speed of threshing cylinder and the teeth gap and investigate the detachment forces. The result are as follows ; The ratio of un-threshed soybeans-pod to stem after threshing work is decreasing as the threshing cylinder speed increases: 0.0% and 2.8% at 55m/s and 18m/s of threshing cylinder speed respectively. Also the ratio of un-threshed soybeans-pod to stem is shown as 2.0% below in the condition of 64~160mm of teeth gap and over 28m/s of threshing cylinder speed. The damaged pod ratio of detached soybeans after threshing work is decreasing as the threshing cylinder speed increases: 4.8% and 1.3% at 55m/s and 18m/s of threshing cylinder speed respectively. The minimum damaged pod ratio of detached soybeans are shown as 1.0%, 1.5% and 1.9% at 18m/s, 28m/s and 37m/s of threshing cylinder speed respectively. The average detachment forces of pods are shown as 1.5kg$_{f}$ for 3 grains, 1.2kg$_{f}$ for 2 grains and 0.8kg$_{f}$ for 1 grain respectively. The maximum detachment force of pod is shown as 2.7kg$_{f}$ for 3 grains. grains.

• 한국전기전자재료학회논문지
• /
• 제11권1호
• /
• pp.48-56
• /
• 1998

Pr\ulcornerO\ulcorner-based ZnO varistors were fabricated in the range of $Y_2$O$_3$additive content from 0.5 to 4.0mol%, and its microstructure and electrical properties were investigated. Yttrium was distributed nearly in the grain boundaries and the cluster phase formed at nodal point but more in cluster phase. The average grain size was decreased markedly from 34.9 to 8.6${\mu}{\textrm}{m}$ with increasing $Y_2$O$_3$additive content. It is believed that the decrease of grain size is attributed to the formation of cluster phase and the weakening of driving force for liquid sintering. As a result, $Y_2$O$_3$was acted as the inhibitor of the grain growth. With increasing $Y_2$O$_3$additive content, the varistor voltage, the activation energy, and the nonlinear exponent increased whereas the leakage current decreased, especially 4.0mol% $Y_2$O$_3$-added varistor exhibited very good I-V characteristics; nonlinear exponent 87.42 and leakage current 46.77nA. On the other hand, as $Y_2$O$_3$additive content increases, the varistor showed tendency of the salient decrease for donor concentration and the increase for barrier height. Conclusively, it is estimated that ZnO:Pr varistor compositions added more than 2.0mol% $Y_2$O$_3$are to be used to fabricate useful varistors.

• 한국운동역학회지
• /
• 제23권2호
• /
• pp.179-187
• /
• 2013

This case study was conducted to determine the effects of water exercise on the foot pressure distribution (FPD) of persons who have a hemiplegia. A 43-year old female with hemiplegia acquired at the age of 3 years was selected from a local disability program. A 12-week water exercise program (60 min. per session and twice a week) focusing on gait training was developed and implemented as the intervention of this study. A recent product of the Pedar-X (Novel, Germany) was used to measure the FPD of hemiplegic gait before and after the intervention. Variables considered in this study included the average pressure (AP), contact area (CA), maximum pressure (MP), ground reaction force (GRF), and center of pressure (COP). The data collected were analyzed via the descriptive statistics and qualitative analyses on the graphical presentations of the FPD. Results revealed that the AP and CA of the hemiplegic foot was considerably increased before and after the intervention. Similar results were also found in the MP and GRF. Additionally, the graphical route of the COP related to hemiplegic foot was changed in a positive way after the intervention. It can be concluded that water exercise may be beneficial to restore hemiplegic gait. Limitations related to measurement and generalizability are further discussed.

• 한국항행학회논문지
• /
• 제19권2호
• /
• pp.123-132
• /
• 2015

CNS/ATM(communication navigation surveillance / air traffic management)의 감시 분야에서는 ADS-B(automatic dependent surveillance - broadcast) 시스템, MLAT(multilateration) 시스템, WAM(wide area multilateration) 시스템이 구축되고 있다. ADS-B, MLAT, WAM 시스템의 항공기 추적 성능이 기존의 레이더에 비해 매우 우수하지만 여전히 오차를 포함하고 있다. 따라서 본 논문에서는 차세대 항행시스템의 오차를 줄이고 항공기 추적 성능을 높일 수 있는 필터링 알고리즘을 제안하였다. 필터링 알고리즘 중에서 가장 유용하다고 알려진 IMM(interacting multiple model) 필터를 개선한 Robust IMM 필터를 사용하였으며, ADS-B, MLAT, WAM 시스템 등의 차세대 항공기 추적 시스템에 적용하였다. Robust IMM 필터는 항공기 추적성능을 향상시킬 뿐만 아니라 항공기 위치 데이터가 손실되더라도 필터에서 계산한 추정값을 이용하여 지속적인 위치 추적을 가능하게 한다. 필터링 알고리즘을 차세대 항행시스템에 적용했을 때 평균 19.21%의 성능향상이 있었다.

• 한국표면공학회지
• /
• 제47권6호
• /
• pp.303-310
• /
• 2014

In this study, the average in-situ stress in metallic thin film was measured during deposition of the Cu thin films on the Si(111) wafer and then the phenomenon of stress shift by the interruption of deposition was measured using Cu thin films. We have observed the stress shift in accordance with changing amount of atom's movement between the surface and grain boundary through altering the grain size of the Cu thin film with variety of parameters. The grain size is known to be affected on the deposition rate, film thickness and deposition temperature. As a experimental results, the these parameters was not adequate to explain stress shift because these parameters affect directly on the amount of atom's movement between the surface and grain boundary as well as the grain size. Thus, we have observed the stress shift toward tensile side in accordance with the grain size changing through the interlayer deposition. From an experiment with inserting interlayer before deposit Cu, in thin film which has big grain size with high roughness, amount of stress movement is higher along direction of tensile stress after deposition that means, after deposition process, driving force of atoms moving in grain boundary and on the surface of the film is relatively higher than before.

• Advances in concrete construction
• /
• 제8권3호
• /
• pp.173-185
• /
• 2019

This article presents a comparative study of the effect of steel layouts on the seismic behavior of transition steel-concrete composite connections, both experimental and analytical investigations of concrete filled steel tube-reinforced concrete (CFST-RC) and steel reinforecd concrete-reinforced concrete (SRC-RC) structures were conducted. The steel-concrete composite connections were subjected to combined constant axial load and lateral cyclic displacements. Tests were carried out on four full-scale connections extracted from a real project engineering with different levels of axial force. The effect of steel layouts on the mechanical behavior of the transition connections was evaluated by failure modes, hysteretic behavior, backbone curves, displacement ductility, energy dissipation capacity and stiffness degradation. Test results showed that different steel layouts led to significantly different failure modes. For CFST-RC transition specimens, the circular cracks of the concrete at the RC column base was followed by steel yielding at the bottom of the CFST column. While uncoordinated deformation could be observed between SRC and RC columns in SRC-RC transition specimens, the crushing and peeling damage of unconfined concrete at the SRC column base was more serious. The existences of I-shape steel and steel tube avoided the pinching phenomenon on the hysteresis curve, which was different from the hysteresis curve of the general reinforced concrete column. The hysteresis loops were spindle-shaped, indicating excellent seismic performance for these transition composite connections. The average values of equivalent viscous damping coefficients of the four specimens are 0.123, 0.186 and 0.304 corresponding to the yielding point, peak point and ultimate point, respectively. Those values demonstrate that the transition steel-concrete composite connections have great energy dissipating capacity. Based on the experimental research, a high-fidelity ABAQUS model was established to further study the influence of concrete strength, steel grade and longitudinal reinforcement ratio on the mechanical behavior of transition composite connections.

• 농업과학연구
• /
• 제46권1호
• /
• pp.11-25
• /
• 2019

This study was conducted to evaluate the effects of a composite feed additive (CFA) consisting of vitamin C, vitamin E, selenium, and choline on growth performance, carcass characteristics, and meat properties of Hanwoo steers. Twenty-two late fattening steers were randomly assigned to one of two dietary groups, control (commercial concentrate + rice straw) and treatment (commercial concentrate + rice straw + 50 g of CFA). Average daily gain (ADG) was 4.0% higher in treatment than that in control; however, there was no statistically significant difference. The supplementation of CFA had no effect on overall yield or quality traits of carcass. CFA had no effect on chemical composition, water holding capacity, shear force, cooking loss, or myoglobin values in longissimus muscle; however, the content of ${\alpha}$-tocopherol was increased by supplementation of CFA (p < 0.01). The contents of ${\alpha}$-linolenic acid and n-3 fatty acids were higher in treatment group than in control (p < 0.01). The ratio of n-6/n-3 fatty acids was decreased by supplementation of CFA (p < 0.01). The supplementation of CFA had no effect on pH or thiobarbituric acid reactive substances (TBARS) values in longissimus muscle (raw); however, TBARS (cooked) values were lower in treatment group than in control during refrigerated storage (p < 0.01). Thus, the results indicate that the supplementation of CFA (vitamin C + vitamin E + selenium + choline) had some positive effects on the increase in ${\alpha}$-tocopherol and n-3 fatty in longissimus muscle, without any negative effect on growth performance or carcass characteristics of late fattening Hanwoo steers.