• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.51-60
• /
• 2008

The purpose of this study is the use of simulation modelling to enhance productivity. In this paper, the optimal buffer allocation of small and medium size industries which produce solenoid valves for automobiles, is performed using simulations. The simulation model was developed under considerations of production layout, process & operation, process time, total work time, WIP, utilization, failure rate, and operation efficiency as inputs, and it was validated with careful comparisons between real behaviors and simulation outputs of the production line. Therefore, we can evaluate effects and changes in productivity when some strategies and/or crucial factors are changed. Although too large buffer could decrease productivity, the solenoid production line in this paper has been maintained large buffer. It is because reducing the size of buffer could result in the termination of the process. We determined the optimal number of buffers that could not cause any interrupt in productions using simulations. This simulation model considers diverse input variables which could influence productivity, and it is very useful not only for the production line of solenoid valves, but also for other production lines with various purposes, especially, small and medium size industries.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.290-297
• /
• 2018

Electric drive technology is continually advanced to improve fuel efficiency in the automobile industry. It could improve the fuel efficiency of automobiles by 50% as well as agricultural machinery. The purpose of this study was to measure and analyze the power and current of an electric transplanter based on the planting distances during field operations. The electric transplanter was constructed by mounting the major components of a motor drive system onto a transplanter. The electric transplanter had a 3 kW motor power, and the major components included an inverter, battery, and a battery management system (BMS). The field tests were conducted by travelling at two speeds (300 and 760 mm/s) and by planting at three distances (260, 420 and 630 mm) with the working speed (300 mm/s), during travelling and transplanting. The results showed that the required power increased when the travelling speed was fast. One-way ANOVA for the planting distance and Duncan's multiple range test at a significance level of 0.05 were used to analyze the motor power using statistical analysis software. In addition, the required power increased when the planting distances were short at every working condition. The results of this study would provide useful information for the development an electric transplanter.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.116-123
• /
• 2016

The quantitative risk assessment methods for thermal failure in targets were studied using fire modeling. To this end, Fire Dynamics Simulator (FDS), as a representative fire model, was used and the probabilities related to thermal damage to an electrical cable were evaluated according to the change in fire area inside a specific compartment. 'The maximum probability of exceeding the damage thresholds' adopted in a conservative point of view and 'the probability of failure' including the time to damage were compared. The probability of failure suggested in the present study could evaluate the quantitative fire risk more realistically, compared to the maximum probability of exceeding the damage thresholds with the assumption that thermal damage occurred the instant the target reached its minimum failure criteria in terms of the surface temperature and heat flux.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.83-96
• /
• 2005

The purposes of this study were to characterize the local levels of VOCs (volatile organic compounds), to develop source profiles of VOCs, and to quantify the source contribution of VOCs using the CMB (chemical mass balance) model. The concentration of VOCs had been measured every 6-day duration in the SRO monitoring site in the Yeosu Petrochemical Industrial Complex from September 2000 to August 2002. The total of 35 target VOCs, which were included in the TO-14 designated from the U.S. EPA, was selected to be monitored in the study area. During a 24-h period, the ambient VOCs were sampled by using canisters placing about 10 ～ 15 m above the ground level. The collected canisters were then analyzed by a GC-MS in the laboratory. Aside from ambient sampling at the SRO site, the VOCs had been intensively and massively measured from 8 direct sources and 4 general sources in the study area. The results obtained in the study were as follows; first, the annual mean concentrations of the target VOCs were widely distributed regardless of monitoring sites in the Yeosu Petrochemical Industrial Complex. In particular, the concentrations of BTX (Benzene, Toluene, Xylene), vinyl chloride were higher than other target compounds. Second, based on these source sample data, source profiles for VOCs were developed to apply a receptor model, the CMB model. Third, the results of source apportionment study for the VOCs in the SRO Site were as follows; The source of petrochemical plant was apportioned by 31.3% in terms of VOCs mass. The site was also affected by 16.7% from wastewater treatment plant, 14.0% from iron mills, 8.4% from refineries, 4.4% from oil storage, 3.8% from automobiles, 2.3% from fertilizer, 2.3% from painting, 2.2% from waste incinerator, 0.6% from graphic art, and 0.4% from gasoline vapor sources.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.18-27
• /
• 2019

Through the technology of the 4th industrial revolution, agricultural machinery is becoming increasingly intelligent, and the machine is replacing the role of farmer manpower as a whole. However, safety accidents caused by careless use of agricultural machines and theft accidents due to the difficulty of keeping them are increasing every year. Because agricultural machines do not manage the history of events and accidents unlike automobiles, they are often used for crime. There is also no way to cope with the issues if there happens issues on agricultural machines. In this paper, we propose the system based on block chain which can manage the history of the agricultural machinery by registering the chassis number at the same time when purchasing the agricultural machinery. Since this system contains the history of accident and repair information about the owner's agricultural machinery, it is possible to trace back even if a theft occurs. The proposed system also allows buyers to secure transactions by providing reliable data through inquiry of this system when trading in the secondary market in the future.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.903-909
• /
• 2004

A CFA(cooling fan assembly) is composed of a fan, motor and shroud, which is at the back of the automotive radiator. By forcing the wind to pass, the CFA controls the cooling performance of the radiator. The noise and vibration of the CFA may be primarily due to the resonance between the CFA and engine. The Interference among the fan, shroud and radiator by deformation is considered when the CFA is designed. In this paper, in order to analyze the structural vibration of the CFA for automobiles, a finite element model of the CFA is established by using a commercial FEM code. After the finite element modeling, the natural frequencies and the mode shapes are obtained from the FE analysis. The natural frequencies are obtained from the vibration test as well. Then, the results of the vibration test are compared with those of the FE analysis. The natural frequencies obtained by experiment have a great similarity to the results from FE model. We have confirmed the validity of the FE model and verify the structural safety for the resonance. The stress and displacements are obtained from FE analysis. We have confirmed the safety for the interference and failure.

• Journal of Integrative Natural Science
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2020

The unsustainable human activities like increased use of automobiles, heavy industrialization and the use of large volumes of fertilizers, chemicals and pesticides in the agricultural land cause climate change problems in one way or another. Under normal circumstances, the heat radiations from the sun will be reflected back. An excessive volume of GHGs in the atmosphere would prevent these radiations from reflecting back. East Asia is facing severe climate change issues in recent times. A lot of climate change problems such as hurricanes and floods have been reported from this region in the last couple of decades. The study aimed at investigating the climate change in East Asia with changing Sea Surface Temperature (SST). The study adopted a quantitative research method with a case study research design where a deliberate focus was made on the East Asia Region. Secondary data was gathered and analyzed to yield both descriptive and inferential statistics. The study concluded that the impact of East Asia Climate variability was significant mainly for some extreme events. Also, the study concluded that there was a significant link between the change of the East Asia climate variability and that of the sea surface temperature. Further, the study concluded that a linear relationship existed between the sea surface temperature and the climate of East Asia. Hence, a linear regression was a significant predictor of the East Asia Climate (EAC) based on changing sea surface temperature. The model revealed that 37.4% of the variations in the climate change index were explained by the changes in the sea surface temperature. The climate was expected to change with a value of 49.48 for a unit change in the sea surface temperature.

• Journal of ILASS-Korea
• /
• v.17 no.3
• /
• pp.113-120
• /
• 2012

It is being more serious problems that the pollutant and the greenhouse gas emitted from the internal combustion engines due to the increasing demand of automobiles. To counteract this, as one of the ways has been studied, GDI type engine, which is directly injected into the combustion chamber and burns by a spark ignition that chose the merits of both gasoline engine and diesel engine, was appeared. The combustion phenomena in this GDI engine is known to contribute to combustion stability, fuel consumption reduction and reductions of harmful substances of exhaust gas emission, when the fuel spray of atomization being favorable and the mixture formation being promoted. Accordingly, this study analyzed the affection of ambient temperature and fuel injection pressure to the fuel by investigate the visualization of combustion, combustion pressure and the characteristic of emission, by applying GDI system on the constant combustion chamber. As a result, as the fuel injection pressure increases, the fuel distribution in the combustion chamber becomes uniform due to the increase of penetration and atomization. And when ambient temperatures in the combustion chamber become increase, the fuel evaporation rate being high but the penetration was reduced due to the reduction of volume flux, and confirmed that the optimized fuel injection strategy is highly needed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.1
• /
• pp.18-23
• /
• 2011

We have investigated the Intelligent Shift-map Module(ISM) to improve some problems in the conventional Automatic Transmission(AT) for automobiles. The typical AT lacks flexibility regarding the shift point because it does not consider the driver's habits and inclinations. Also it often is occurred phenomenon like kick-down. Therefore, we designed a decision module which considers the driving style of the individual driver. The driving style was determined by the inclination of the driver and the driving technique using actual automobile data. The Hierarchical Neural Network(HNN) was applied in generating an intelligent shift map with Multilayer Neural Network(MNN). It was found that the proposed ISM provided a suitable shift point and time because the necessary toque and velocity of the automobile was considered along with the driving style of each driver when designing the ISM.

• Culinary science and hospitality research
• /
• v.10 no.1
• /
• pp.32-45
• /
• 2004

This study is about choice attribution of customers make in food and beverage events. The researcher provided practical plans to uplift food-related enterprises and activate management through surveys and positive analyses, targeting customers who use food services. First of all, all event plans must include customer demands, social changes, special qualities of the business, and market research. Second, low demand season must be customers will be induced to the events. Third, prediction for market variable and solutions must be thoroughly examined and plans should look into the future to maintain a long period of time. Fourth, sufficient communication between planners and employees should be made before the event starts, so that food and beverage businesses can gain trust and quality of event services.Fifth, immaterial service and visible goods/menus in business of food and beverage events must be closely matched. Sixth, menus introducing a variety of merchandise, quality of nutrition and health of the business should be developed. Also, events from countries(regions) should be hold to create a market of cultural exchange. Seventh, for hereafter event plans, feedbacks are needed concerning customers needs and demands through customer care, after the food and beverage events. Eight, faculty management for convenience, kindness, safety, and life preserver accommodations in parking areas must be made, as automobiles are necessaries for people in Mycar era. The ninth, off-line and on-line care through on-line business construction and production of homepage must be done, due to the fact that even the well-made events are bound to fail if they are not delivered to the customers.