• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.172-174
• /
• 2007

An electronic watt-hour meter with high-precision measurement technology can provide many valuable metering data of a real-time system measurements, such as per-phase voltage, ampere, active power, reactive power, apparent power, power factor, and system frequency. Also many of accumulated metering data such as active energy, reactive energy, apparent energy, and load profile can be gettable from an electronic watt-hour meter[1]. This paper presents an approach of the small-sized AMR (Automatic Meter Reading) that provides customers with a very valuable electrical service. This AMR service transmits lots of a valuable metering data by using ZigBee communication module, so that users resided in their premises can use the information to audit a power quality and improve their electrical conditions by using the PQ monitoring device equipped with ZigBee receiver. This PQ monitoring device shows metering data on LCD and transmits to the PC through an internal network. Also, the device can keep the valuable meter data into a built-in non-volatile memory. The final goal of this paper is to better understand the power quality of electrical systems and offer the power qualify information for the convenience of all power consumers.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.97-100
• /
• 2007

Recently, there is developed various antenna's models due to increment of wireless communication the need of quantitative study on antenna's measuring technology gets to highlight. In this paper, we propose algorithm of antenna's edge alignment for making automatic measuring system of antenna's characteristics of near-field measurement system of antenna. The proposed algorithm gets the bottom image of antenna from camera, extracts antenna object, and finds the boundary the object. The proposed algorithm calculates distortion of the object using the extracted boundary and the angle to correct this. The proposed algorithm is applied to the standard gain horn antenna. The results show that antenna's object is efficiently extracted and the angle for correcting the error is calculated.

• Journal of the Korean housing association
• /
• v.25 no.2
• /
• pp.11-18
• /
• 2014

This study looked at designing, building and operating temporary camp, the first structures that South Korea built in the Antarctica. While there may be differences in accordance with the topography, ground surfaces in the Antarctica are covered broken stones, glaciers and snow. Hence, such topographical characteristics should be taken into account when conducting any construction work. To ensure successful assembly construction in the Antarctica using modules, prior trial assembly work should be done in Korea to identify any possible trouble in the actual construction process. Assuming that the workers will have to spend at least one winter in the temporary camp, the work will be more severely affected by adverse weather conditions and snow drift, resulting in the need to clear snow. This can be by designing roofs with curved surfaces. Also, quantitative effects will need to be verified through simulation and actual measurement. It will also be necessary to assess the camp's thermal environment and examine its air-conditioning methods. To identify the temporary camp's thermal system, the temperatures and humidities were measured, and the heating system was designed not to offer automatic control or desired value selection functions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.277-284
• /
• 2000

Using the large diameter (D ＝ 2,500mm, L ＝ 40m) batter steel pipe piles, designed as compression piles but used as reaction piles during the static compression load test of socketed test piles (D ＝ 1,000mm, L ＝ 40m), static pile load tests for large diameter instrumented rock-socketed piles were performed. The reaction steel pipe piles were driven 20m into the marine deposit and weathered rock layer and then l0m socketed with reinforced concrete through the weathered rock layer and into hard rock layer. Steel pipe and concrete in the steel pile part, and concrete and rebars in the socketed parts were instrumented to measure strains in each part. The pullout amounts of reaction pile heads were also measured with LVDT. During the static pile load test, total compressional load of about 20MN was loaded on the head of test piles, but load above 20MN was not loaded due to lack of loading capacity of loading system. Over the course of the study, maximum pullout amount up to 7mm was measured in the heads of reaction piles when loaded op to 10MN and 1mm of pullout amount was measured. More than 85% of pullout load was transfered in the residual weathered rock layer and about 10% in the soft rock layer, which was somewhat different transfer mechanism in the static compressional load tests.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.4 s.247
• /
• pp.287-297
• /
• 2006

The Holographic Particle Velocimetry system can be a promising optical tool for the measurements of three dimensional particle velocities. One of inherent limitations of particle holography is the very long depth of field of particle images, which causes considerable difficulty in the determination of particle positions in the optical axis. In this study, we introduced three auto-focusing parameters corresponding to the size of particles, namely, Correlation Coefficient, Sharpness Index, and Depth Intensity to determine the focal plane of a particle along the optical axis. To investigate the suitability of the above parameters, the plane image of dot array screens containing different size of dots was recorded by diffused illumination holography and the positions of each dot in the optical axis were evaluated. In addition, the effect of particle position from the holographic film was examined by changing the distance of the screen from the holographic film. All measurement results verified that the evaluated positions using suggested auto-focusing parameters remain within acceptable range of errors. These research results may provide fundamental information for the development of the holographic velocimetry system based on the automatic image processing.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.4
• /
• pp.365-373
• /
• 2011

This paper presents the dynamic response and the vibration characteristics for a rail-track supported by discrete springs and dampers. Recently, automatic conveyer system, rail-track, rack-master system demand the soundproof facilities and vibration suppression measures in order to satisfy the strict environmental standards. The equations of motions of the dynamic characteristics for a vibration suppression rail-track under a traveling mass were derived by Galerkin's mode summation method considering gravity, centrifugal force, Coriolis force, inertia force of the moving mass, transverse inertia of the rail-track. Also, numerical results were calculated by Runge-Kutta integration method. In order to investigate vibration characteristics and dynamic responses, modal testing and measurement of the responses of the rail-track were performed. Through the experiment and numerical simulations, numerical results have a good agreement with experimental ones.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1706-1712
• /
• 2012

The Beta-ray absorption method (BAM) gives a good solution for measuring the mass concentration of atmospheric particles(PM10 and PM2.5). To determine particular matters (PM) concentration, a ratio of the number of detected beta-ray intensity passing through the clean filter and the dust-sampled filter is used. These intensity data measured in air pollution monitoring such as PM10 and PM2.5 usually contained the additive noise(thermal noise, power supply noise and etc.). Therefore, the estimation performance of mass concentration can be deteriorated by these noises. In this paper, we present a new noise reduction method that is essentially required to develope an automatic continuous PM monitoring system using beta-ray absorption method. By combining the block data averaging technique and curve fitting, in the proposed method, the additive noise can be reduced in the measured data. To evaluate the performance of the proposed method, computer simulations were performed with computer generated signals as the input.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.60-66
• /
• 2008

Each weapon system's muzzle velocity can be used as basic data for operating accurate automatic firing control system. Even among the same kind of ammunition, despite taking into consideration various battlefield parameters, irregular performance causes difficulties in obtaining accurate muzzle velocity data. In this study, pressure in the gun barrel was measured, the experimental relationship between chamber pressure and the projectile's base pressure was found, and a method of obtaining muzzle velocity was researched. Through this method, data regarding muzzle velocity is offered that corrects irregular performance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.251-251
• /
• 2016

인공위성을 이용한 가뭄연구에는 전지구적으로 운용되는 GPM (Global Precipitation Measurement) 위성, AQUA/TERRA 위성의 MODIS (MODerate resolution Imaging Spectroradiometer) 센서 등에서 수집된 관측 자료가 이용된다. 그러나 전지국적으로 관측된 위성 자료는 자료를 생산 제공하는 기관에 따라 자료의 파일포맷 (NetCDF, HDF5, GeoTIFF 등), 자료의 투영법 (projection) 등이 상이하다. 그러므로 가뭄연구에 다중위성자료를 활용하고자 하는 지리정보시스템(Geographic Information System: GIS)에 대한 전문지식이 부족한 연구자는 자료의 표준화 (파일포맷과 투영변환 등) 과정으로 인해 원활한 연구수행이 어렵다. MODIS 위성자료의 경우에는 일반적으로 많이 사용되는 횡단메르카토르 도법 (Transverse Mercator Projection: TM) 대신 시뉴소이드 도법 (sinusoidal projection)을 이용한다. 그래서 미국 지질조사국은 MODIS 자료의 재투영(reprojection)을 위한 전용 소프트웨어인 MRT (MODIS Reprojection Tool)를 배포하고 있다. 본 연구에서는 무료/오픈소스 소프트웨어를 활용하여 시뉴소이드 도법이 적용된 MODIS 자료의 수집, 재투영, 파일포맷 변환 등을 자동으로 처리하는 기법을 개발하여 가뭄활용에 이용하고자 하였으며, MODIS MOD09GA/MOD11A1 자료를 이용하여 효율성을 검증하였다.

• Journal of Sasang Constitutional Medicine
• /
• v.19 no.2
• /
• pp.22-29
• /
• 2007

1. Objectives Sasang Contitutional Medicine, a part of the traditional Korean medical lore, treats illness through a constitutional typing system that categorizespeople into four constitutional types. A few of the important criteria for differentiating the constitutional types are external appearances, inner state of mind, and pathological patterns. We had been developing a 3D Automatic Face Recognition Apparatus (3D-AFRA) in order to evaluate the external appearances with more objectivity. This apparatus provides a 3D image and numerical data on facial configuration, and this study aims to evaluate the mechanical accuracy of the 3D-AFRA hardware. 2. Methods Several objects of different shapes (cube, cylinder, cone, pyramid) were each scanned 10 times using the 3D Automatic Face Recognition Apparatus (3D-AFRA). The results were then compared and analyzed with data retrieved through a laser scanner known for its high accuracy. The error rates were analyzed for each grid point of facial contour scanned with Rapidform2006 (Rapidform2006 is a 3D scanning software that collects grid point data for contours of various products and products and product parts through 3D scanners and other 3D measuring devices; the grid point data thusly acquired is then used to reconstruct highly precise polygon and curvature models). 3. Results and Conclusions The average error rate was 0.22mm for the cube, 0.22mm for the cylinder, 0.125mm for the cone, and 0.172mm for the pyramid. The visual data comparing error rates for measurement figures retrieved with Rapidform2006 is shown in $Fig.3{\sim}Fig.6$. Blue tendency indicates smaller error rates, while red indicates greater error rates The protruding corners of the cube display red, indicating greater error rates. The cylinder shows greater error rates on the edges. The pyramid displays greater error rates on the base surface and around the vertex. The cone also shows greater error around the protruding edge.