• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.11
• /
• pp.52-62
• /
• 1995

We developed a two-dimensional numerical simulator which can analyze the electrical as well as optical characteristics and evaluate the detection performances of self-signal processing infrared detectors. It solves the poisson equation and the electron, hole current continuity equations including the optical generation and recombination models. To speed up convergency rate. the Newton algorithm is used. Automatic triangular grid generator make it easy to simulate the devices with the various read-out geometries. This simulator can show the variation of spatial resolution which is caused by the transit velocity and transit time dispersion in bifurcate and horn geometries respectively. Also, we calculated the responsivity, noise, and detectivity in respect of the applied electric field and background field-of-view. The results obtained from simulation correspond to those of experiments, and it is verified that horn read-out geometry has the superior spatial resolution and detection performance to bifurcate geometry.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.443-444
• /
• 2016

본 논문에서는 도서지역 디젤발전기 자동전압제어시스템을 개발하고 국내 다수의 도서지역에 적용하여 시험한 결과와 설계 내용에 대해 기술하였다. 기존 외산제품에서 별도의 하드웨어를 통해 수행하던 회전형 다이오드 진단기능을 소프트웨어적으로 구현하여 제어기 내에 통합하였으며, 자동으로 계통전압을 추종하는 기능을 추가하는 등 도서지역의 특성을 분석하고 그에 맞는 기능들을 새로 추가 적용하였다.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.368-371
• /
• 1996

The basic function of an excitation system is to provide direct current to the synchronous machine field winding. In addition, the excitation system performs control and protective functions essential to a satisfactory performance of a power system by controlling the field voltage and thereby the field current. This paper describes the characteristics and modeling of different types of excitation systems and discusses dynamic performances. In this paper, we modified IEEE ACIA and STIA excitation system to simple system. The automatic voltage control system which had been developed by KEPRI is used for experiments and simulations.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.496-507
• /
• 2001

An expert system for the diagnosis and indication of hypertension is implemented through HTML-based backward inference. HTML-based backward inference is performed using the hypertext function of HTML, and many HTML files, which are hyperlinked to each other based on the backward rules, should be prepared beforehand. The development and maintenance of the HTML files are conducted automatically using the decision graph. Still, the drawing and input of the decision graph is a time consuming and tedious job if it is done manually. So, automatic generator of the decision graph for the diagnosis and indication of hypertension was implemented. The HTML-based backward inference ensures accessibility, multimedia facilities, fast response, stability, easiness, and platform independency of the expert system. So, this research reveals that HTML-based inference approach can be used for many Web-based intelligent site with fast and stable performance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.76-78
• /
• 2003

현재 무선 이동 장비인 핸드폰이나 PDA 등을 이용한 무선 인터넷의 사용이 급증하고 있다. 이러한 장비들을 이용한 전자 상거래를 신속하게 지원하기 위해서는 WAP 응용의 생산성 향상이 요구되고 있다. 본 논문에서 소개하는 WAPSiteGen은 데이터베이스부터 구축해야 하는 WAP 응용과 기존 데이터베이스를 사용하는 WAP 응용의 신속한 작성을 위해 필요한 EJB 컴포넌트들과 무선 응용의 사용자 인터페이스로 사용되는 WML 데크들과 함께 이데크를 구성하는 카드를 통해 이뤄질 질의를 처리하는 JSP 웹 컴포넌트들을 자동 생성하여 WAP 응용의 생산성향상을 지원하는 도구이다. WAPSiteGen은 EJB와 JSP 등의 컴포넌트 기술을 도입함으로써 3-계층 구조를 갖는 WAP 응용의 확장성, 재사용성, 이식성 등을 지원한다. 또한, 비슷한 기능을 지원하는 타상용 도구들과 달리 WAPSiteGen이 생성하는 응용은 질의의 대상인 개체와 연관된 모든 개체들의 집합을 한 단위로 검색 할 수 있어 연관된 정보들을 신속하게 제공할 수 있다.

• Korean Journal of Digital Imaging in Medicine
• /
• v.3 no.1
• /
• pp.76-84
• /
• 1997

We tried to find any factor to reduce the exposure dose with ST-VA type generator which has the higher exposure dose. The guideline recommended by the provisions of IAEA regulation is being used at the time of radiation exposure and almost of those equipments used for this study had less amount of doses than those in the guideline. The FCR may be possible to decrease a certain amount of dose with effective applications of it's automatic image compensation utilities and the verifying function in PACS. Next time, it is required to add a great number of hospitals for wide range of studios and measurements, and make standard exposure Control table which will bing in practice, material decrease of dose volumes when radiation exposure.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.81-91
• /
• 1997

In this study, a magnetic sensor to make use of eddy current was developed to detect the weld seam of butt joint in the sheet metal arc welding. This system consist of the sensor device for detecting the weld line, the servo control device for driving the weld torch movement and the control unit. A signal processing was applied to smooth the output signal of the sensor. The weld joint was determined by using a 1st order differential method. To improve tracking accuracy of the system, moving average method which has an effect of proportional and weighted integral control was applied to a series of the weld joint positions obtained above. The weld line for tracking was generated by using data regeneration algorithm. Based on these results, each servo motor was controlled by pulse generator. From experimental results, it was revealed that this system has excellent detecting ability for weld line and seam tracking ability.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1807-1816
• /
• 2020

In this work, a Gaussian Process (Kriging) approach is proposed to provide efficient dose mapping for complex radiation fields using limited number of responses. Given a few response measurements (or simulation data points), the proposed approach can help the analyst in completing a map of the radiation dose field with a 95% confidence interval, efficiently. Two case studies are used to validate the proposed approach. The First case study is based on experimental dose measurements to build the dose map in a radiation field induced by a D-D neutron generator. The second, is a simulation case study where the proposed approach is used to mimic Monte Carlo dose predictions in the radiation field using a limited number of MCNP simulations. Given the low computational cost of constructing Gaussian Process (GP) models, results indicate that the GP model can reasonably map the dose in the radiation field given a limited number of data measurements. Both case studies are performed on the nuclear engineering radiation laboratories at the University of Sharjah.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.119-121
• /
• 2000

The possibility of a remote on-line determination of the maximum load rates that are basically set at generation plants is investigated in automatic generation control (AGC) system. Energy management system (EMS) generates a test input to a remote power plant to get the samples of the generator output. Then from the samples it can be attempted to determine an approximate value of the load rate limit set by the operator. It is shown in computer simulation that in actual power plants the limit can be approximately determined from the input-output characteristics of the plants for a unit-step input.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.627-630
• /
• 1996

One of the most common communication mechanisms to describe a situation or a process is a story written as an ordered sequence of events or activities. For example, a shop floor supervisor may present the operations of his manufacturing system by describing the processes of manunfacturing a product in his shop. Although IDEF3 is one of the most commonly used methods for describing a business process, but it is not common for a manufacturing process. In this study, we tried to apply IDEF3 for describing a manufacturing process. Problems and suggestions such as selection probability, programmable process modeling, manufacturing resource model were presented.