• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.367-371
• /
• 2004

This paper describes development of automatic flight control system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated now days use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of automatic flight control system is verified by flight test.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2004

This paper deals with the automatic flight control system for an unmanned target drone which is operated by an army as an anti-air gun shooting training. By automation of unmanned target drone that is manually operated by external pilot, pilot can reduce workload and an army can reduce the budget. Most UAVs which are developed until today use high-cost sensors as AHRS and IMU to measure the attitude, but those are contradictory for the reduction of budget. This paper says the development of low-cost automatic flight control system which makes possible of automatic flight with low-cost sensors. We have developed the integrated automatic flight control system by integrating electricity module, switching module, monitoring module and RC receiver as an one module. We also prove the performance of automatic flight control system by flight test.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.8
• /
• pp.29-35
• /
• 2019

This paper proposes a UAV equipped with an automatic control system for educational purposes such as navigation flight or autonomous flight. The proposed UAV is capable of automatic navigation flight and it is possible to control more precisely and delicately than existing UAV which is directly controlled. And it has the advantage that it is possible to fly in a place out of sight. In addition, the user may arbitrarily change the route or route information to use it as an educational purpose for achieving the special purpose. It also allows you to check flight status by shooting a video during flight. For this purpose, it is designed to check the image in real time using 5.8GHz video transmitter and receiver. The flight information is recorded separately and used as data to judge the normal flight after the flight. The result of the paper can be flighted along the coordinates specified using GPS information. Since it can receive real-time video, it is expected to be used for various education purposes such as reconnaissance of polluted area, achievement of special purpose, and so on.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.105-111
• /
• 2004

This paper describes the design of navigation system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated nowdays use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of navigation for low cost unmanned aerial vehicle, unmanned target drone as our test bed in this paper is verified by both Hardware in the loop simulation(HILS) to test performance of GPS as GPS output frequency high and results of flight test.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.112-119
• /
• 2004

This paper proposes an attitude determination GPS/INS integrated system scheme for a UAV and presents experimental flight test results. The proposed system is designed as a part of an autopilot system and comprises a GPS attitude determination receiver, an off-the-shelf inertial measurement unit (IMU), and a navigation computer unit (NCU). UAV requires accurate attitude information for stable automatic flight control. The proposed system can provide accurate attitude information for the flight control computer (FCC) so that stable automatic flight control can be achieved. In order to verify the performance of the proposed scheme, an integrated navigation system has been developed. In order to evaluate the developed navigation system, the flight test has been performed. In the flight test, the developed system was shown to provide the position, the velocity and the attitude satisfactorily enough for stable flight control. The accuracy of the attitude information of the developed system was confirmed by comparing attitude of vertical gyro.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.635-642
• /
• 2009

This paper describes the Flight Dynamics Automation (FDA) system for COMS Flight Dynamics System (FDS) and its test result in terms of the performance of the automation jobs. FDA controls the flight dynamics functions such as orbit determination, orbit prediction, event prediction, and fuel accounting. The designed FDA is independent from the specific characteristics which are defined by spacecraft manufacturer or specific satellite missions. Therefore, FDA could easily links its autonomous job control functions to any satellite mission control system with some interface modification. By adding autonomous system along with flight dynamics system, it decreases the operator's tedious and repeated jobs but increase the usability and reliability of the system. Therefore, FDA is used to improve the completeness of whole mission control system's quality. The FDA is applied to the real flight dynamics system of a geostationary satellite, COMS and the experimental test is performed. The experimental result shows the stability and reliability of the mission control operations through the automatic job control.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.874-881
• /
• 2010

A automatic flight control system(AFCS) of UAS needs to control its flight path along target path exactly as adjusts flight coefficient itself depending on static or dynamic changes of airplane's features such as type, size or weight. In this paper, we propose system which tunes control gain autonomously depending on change of airplane's feature in flight as adding MLM(Machine Learning Module) on AFCS. MLM is designed with Linear Regression algorithm and Reinforcement Learning and it includes EvM(Evaluation Module) which evaluates learned control gain from MLM and verified system. This system is tested on beaver FDC simulator and we present its analysed result.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.2
• /
• pp.267-278
• /
• 2009

Automation of the key flight dynamics operations for the geostationary orbit satellite mission is analyzed and designed. The automation includes satellite orbit determination, orbit prediction, event prediction, and fuel accounting. An object-oriented analysis and design methodology is used for design of the automation system. Automation scenarios are investigated first and then the scenarios are allocated to use cases. Sequences of the use cases are diagramed. Then software components and graphical user interfaces are designed for automation. The automation will be applied to the Communication, Ocean, and Meteorology Satellite (COMS) flight dynamics system for daily routine operations.

• Journal of Advanced Navigation Technology
• /
• v.4 no.1
• /
• pp.11-22
• /
• 2000

Instrument flight simulators are used for training the interpretation and operation techniques for all kinds of aircraft instruments, cockpit procedures, etc., in order that pilots cope with the situations which can be occurred in actual flight. However, the simulators developed so far are concerned about operating in same environment to actual aircraft. And little researches concentrate on developing systematic training system for basic tasks and takeoff-landing procedures, and automatic evaluation methods on the training results. Therefore, in this paper, we propose implementation and evaluation methods for flight tasks such as tasks in flight, takeoff-landing procedures and course flight.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.259-260
• /
• 2012

With increasing interest in alternative energy source for green growth, this document shows that the study of kite flight control is based on the concept of autonomous flight of kite can exploit the energy. Currently, prototype kite was designed and the purpose of its flight test, by manual flight control with Remote Controller, was performed for the feasibility of the full automatic flight control. For the future research, the test data should be collected through the many flight test under various environment.