• 대한의용생체공학회:의공학회지
• /
• 제35권6호
• /
• pp.203-210
• /
• 2014

Wearable medical device has been a resurgence of interest thanks to the development of technology and propagation of smart phone in recent years. Various types of wearable devices have been introduced and available in market. Capacitive coupled electrode which measures electrocardiogram over cloth is able to be applied wearable device. In previous approaches of capacitive electrode, they need proper pressure for stable contact of the electrode to body surface. However, wearable device that gives pressure on body surface is not suitable for long-term monitoring. In this study, we proposed adhesive polyurethane-based capacitive electrode for patch-type wearable electrocardiogram (ECG) monitoring device. Self-adhesive polyurethane make the electrode and whole system be adhered to the surface of skin without any pressure. The patch-type system is consisted of analog filter, analog-to-digital converter and wireless transmission module and designed to be attached on the body as a patch. To validate the feasibility of the developed system, we measured ECG signal in stable and active state and extracted heart rate. Therefore, we observed skin response after long-term attachment for biocompatibility of the adhesive polyurethane and adhesive strength of it. The result shows the possibility of applying the developed system for ECG monitoring in real-life.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.453-460
• /
• 2020

본 논문에서는 함정의 합내통신, 함외통신, 방송, 전화 등의 통합통신 안테나 중 함외통신용 UHF 대역 통합통신 안테나를 통합마스트에 탑재 가능한 평면형으로 설계했다. 제안된 통합마스트 탑재용 안테나는 해군의 한국형차기구축함(KDDX)에 적용되는 통합통신용 안테나로 작전능력, 생존성 강화와 운용성과 정비성의 향상 등 '복합경사' 구조를 포함하는 최적화된 형태의 통합통신용 안테나이다. 기존 회전식 레이더와 다수의 모노폴 형태의 통신용 안테나를 마스트 외관에 불규칙한 형태로 부착된 형태에서 평판형 통합통신용 안테나를 포함하는 통합 마스트 형상으로 변경하여 레이더 반사 면적 지수(RCS)를 크게 낮추며 해외제품 대비 고이득 광대역 안테나를 개발목표로 한다.

• 복식
• /
• 제59권4호
• /
• pp.1-13
• /
• 2009

The purpose of this study is to examine the types of and figurative characteristics of in women's embroidered handicrafts of Korea. It also aims to revive Korean traditional beauty, to examine the applicability of Korean traditional design that has both modern beauty and practicality, and to develop Korean women's embroidered handicrafts. The types of women's embroidered of Korea include Jumoni (pouches), Bojagi (wrapping cloths), and other accessories made by sewing. Jumoni consisting of 55.51% of them was the most frequently used handicraft followed by Bojagi (8.66%), and other accessories (35.83%). In terms of the patterns used, animal pattern and plant pattern were used the most frequently. In addition, complex patterns using two or three patterns together(70.49) were more frequent than singular patterns (29.53%). Pictorial type of pattern arrangement (58.24%) was used the most frequently and dense type (39.76%) and sparse type (2.00%) were followed. In terms of the materials on which embroidery was used, Dahn (85.82%) was used the most frequently followed by wool (5.67%), cotton (4.26%), silk (3.55%), and Sa (0.70%). Various techniques of stitches were used such as outline stitch (40.56%), satin and running stitch (29.32%), French nut stitch (28.11%), long and short stitch (21.28%), double leaf stitch (20.88%), and so on. Among them, satin stitch (63.05%) was the most popular type of stitch techniques. Strings (23.56%), maedeup (Korean traditional knots, 8.62%), or tassels (9.77%) were also attached for the purpose of both practicality and of decoration. There were some cases that added cloissone or red-pepper shaped decorations.

• 한국안광학회지
• /
• 제13권4호
• /
• pp.9-12
• /
• 2008

목적: 현재의 방독면은 안경을 착용하는 사람들에게는 매우 불편한 구조로 되어 있다. 이를 개선하여 군인이나 소방관들이 자신을 보호하고 인명을 구조하는데 도움이 되도록 하였다. 방법: 외면렌즈와 내면의 시력보정용 렌즈의 2중 구조로 되어 있는 것을 아크릴 프레임을 방독면에 부착하는 단일 구조로 변경하고 실리콘 차단제를 이용하여 렌즈와 프레임 사이를 밀폐하여 가스의 유입을 방지하게 하였다. 렌즈에서 발생하게 되는 비점수차제거와 정간거리 유지를 위해 S자형의 프레임으로 개발하였다. 결과: 완전한 시력교정과 가스차단이 가능하고 일반 안경처럼 안경렌즈를 교환하여 사용할 수 있게 되었으며 시선과 렌즈면의 경사로 발생하던 비점수차 0.53D~1.78D, 짧은 정간거리로 발생하던 0.07D~0.66D의 과교정, 전경각 미설정으로 발생하던 0.1D~0.3D의 비점수차를 제거할 수 있게 되었다. 결론: 방독면을 쓴 상태에서도 밝은 시야의 확보가 가능하여 전투력 향상과 인명구조 활동 등에서 큰 도움이 될 수 있을 것으로 예상된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.489.2-489.2
• /
• 2014

The planar type flexible piezoelectric energy harvesters (PEH) based on PbZr0.52Ti0.48O3 (PZT) thin films on the flexible substrates are demonstrated to convert mechanical energy to electrical energy. The planar type energy harvesters have been realized, which have an electrode pair on the PZT thin films. The PZT thin films were deposited on double side polished sapphire substrates using conventional RF-magnetron sputtering. The PZT thin films on the sapphire substrates were transferred by PDMS stamp with laser lift-off (LLO) process. KrF excimer laser (wavelength: 248nm) were used for the LLO process. The PDMS stamp was attached to the top of the PZT thin films and the excimer laser induced onto back side of the sapphire substrate to detach the thin films. The detached thin films on the PDMS stamp transferred to adhesive layer coated on the flexible polyimide substrate. Structural properties of the PZT thin films were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). To measure piezoelectric power generation characteristics, Au/Cr inter digital electrode (IDE) was formed on the PZT thin films using the e-beam evaporation. The ferroelectric and piezoelectric properties were measured by a ferroelectric test system (Precision Premier-II) and piezoelectric force microscopy (PFM), respectively. The output signals of the flexible PEHs were evaluated by electrometer (6517A, Keithley). In the result, the transferred PZT thin films showed the ferroelectric and piezoelectric characteristics without electrical degradation and the fabricated flexible PEHs generated an AC-type output power electrical energy during periodically bending and releasing motion. We expect that the flexible PEHs based on laser transferred PZT thin film is able to be applied on self-powered electronic devices in wireless sensor networks technologies. Also, it has a lot of potential for high performance flexible piezoelectric energy harvester.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.71-79
• /
• 2011

There are high recognitions on the importance of comforts in Elderly living environment, but the circumstance is that studies on seniors facility space itself are approached only in planning level, and studies on lighting environment which is significantly associated with the comfort in the indoor environment of seniors where they actually spend the majority of their time are not that active. This study was intended to deduce cozy bedroom environment to which existing elderly care facility can be improved by using light shelf the lighting system with the advantage of being able to serve both as building sun visor and lighting window simultaneously in order to analyze the interior environment of bedroom space of elderly care facility the indoor space where the aged spend the majority of their life and examine the directions for the improvement of existing building lighting system through remodeling and renovation. In this study, lighting performance analysis was done in a way that the windows of the bedroom unit in existing facility were set in southbound direction based on two standard types and were put under initial simulation with the use of Autodesk Revit 2011, and after the simulation results were converted to Green Building Studio gbXML file to be used in ECOTECT, Daylight Autonomy a dynamic simulation and static natural lighting simulation the existing method of calculating daylight factors were deduced through Ecotect Analysis 2011. In conclusion, exiting standard model was found in such a condition that the daylight factors for both type A and type B were above 5% the proper standard value, and required improvement. In case light shelf the natural lighting system was attached, the daylight factor was improved to proper standard value for type A, and also was improved above existing facility for type B.

• Journal of Biosystems Engineering
• /
• 제25권6호
• /
• pp.463-470
• /
• 2000

For maximum seeding efficiency of a nozzle type seeder, the performance of the nozzle should be considered sufficiently. This study was carried out to investigate the optimum operating conditions of a seeder attached the vacuum nozzle which was modified syringe needle acting on the plug seedling tray and the seed plate. Such operating factors as the hole diameter of the nozzle (d), the distance from the nozzle tip to the bottom plate of seed hopper(D) the absorbing air pressure of the nozzle tip(P) the bounding height of seed from the vibrated bottom plate of seed hopper and the seeding speed were selected based on the weight of a grain of seed(W). The treated materials were pepper seed as the flat type, cucumber seed as the oval type and radish seed as the spherical type. The optimum operating conditions of the experimental seeder were revealed as follows: 1. The height of the seed bounding from the bottom plate of seed hopper and the distance from nozzle tip to bounded seed were 5 mm and 0.5 mm at all seeds. The hole diameter of the nozzle and the absorbing pressure for pepper seed, cucumber seed and radish seed was 0.45 mm, 0.65 mm. 0.65mm and 39.2 kPa, 88.3 kPa, 58.8 kPa, respectively. 2. The absorbing pressure P was represented as P=η.4W/$\pi$d$^2$ where η was 100. The seeding speed using a 128 cell tray was 2.4 cm/s which was same transfer as 2.5 trays per minute. 3. The maximum seeding rate in case of the pepper seed was 97% the cucumber seed was 95% and the radish seed was 100% under the optimum operating conditions of the seeder.

• 대한치과보철학회지
• /
• 제34권4호
• /
• pp.833-849
• /
• 1996

The material of choice for functional and esthetic reconstruction of maxillofacial defects is silicone. Silicone has appropriate physical properties for maxillofacial prosthesis but it has weak edge strength. Therefore, a proper combination of silicone and polyurethane sheet is recommended to improve this weakness. Various primers are also used to enhance the adhesive strength between silicone and polyurethane sheet. The purpose of this study was to determine the adhesive strength of silicone and polyurethane sheet. Silicone elastomer mixture was made by admixing MDX4-4210 elastomer (40%) and Silastic Medical Adhesive Type A(60%). This silicone elastomer mixture was attached to polyurethane sheet, using one of three different primers(1205, S-2260, or A-304), treated for 1, 2, 4, 6, and 8 hours. These were then polymerized in room temperature, dry-heat oven or microwave oven. Six specimens per each group, a total of 270 specimens were prepared for final test. The differences of T-peel bonding strengths were then determined by a test. The differences of T-peel bonding strengths were then determined by a test method that was recommended by American Society for Testing and Materials C794-80. The results were statistically analyzed using the ANOVA and Mutiple Range Tests(Tukey' HSD). The reults were as follow. 1. Type of primer, primer reaction time, and methods of polymerization showed significant correlation on the T-peel bonding strengths in adhesiveness between silicone and polyurethane sheet. 2. A-304 primer showed statistically higher in T-peel bonding strength than otehr type of primers except for the polymerization in microwave oven with reaction times of 2, 6 hours(p<0.05). 3. No significant differences in T-peel bonding strength were observed among the polymerization methods. 4. The effect of reaction time by the primer type and polymerization method showed statistically significant differences in bonding strength among different reaction times. And in most cases, reaction time of 1 or 2 hours showed higher T-peel bonding strength.

• 한국전자파학회논문지
• /
• 제26권12호
• /
• pp.1058-1063
• /
• 2015

본 연구에서는 높은 투과 효율은 유지하면서 스팟 면적을 보다 획기적으로 줄일 수 있도록 가느다란 두 개의 짧은 도체 봉이 리지(H-형태) 개구의 중심에 부착된 근접장 마이크로웨이브 주사 탐침 구조를 제안하였다. 여기서 두 개의 짧은 도체 봉은 H-형태 개구를 통과하는 투과 전자파 에너지를 집속하게 하여, 고 해상도를 위해 스팟 면적을 극히 작게 줄어들게 하는데 중요한 역할을 한다. 제안된 이론의 타당성을 확인하기 위해 모의실험 결과에 따라 근접장 도파관 탐침을 제작하고, 반사손실을 측정하여 계산결과와 비교적 일치된 결과를 얻었다.

• 한국자기학회지
• /
• 제23권4호
• /
• pp.135-143
• /
• 2013

요골 동맥의 중앙 부에 위치 한 "관"이란 곳에 영구자석 부착하여 맥의 움직임에 따라 발생하는 자기장의 변화를 홀센서로 정량화하여 맥진파형을 측정하는 집게형 맥진기를 개발하였다. 홀소자 맥진센서로 얻어진 전기적 신호로 심전도와 용적맥파계를 사용해 동시에 측정된 맥박수, 비침습적 혈압, 호흡수, 맥파전달속도와 공간맥파전달속도를 환자감시장치에 디스플레이하였다. 개발된 장치는 한방과 양방의 의료용 저장 매체와 새롭게 시도되거나 융합되어지고 있는 환자감시 장비 및 유비쿼터스 헬스케어 시스템 개발에 도움이 될 것이다.