• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.105-113
• /
• 2004

This paper presents a design method for an asynchronous memory with a completion signal generation circuit meeting D-I model. The proposed design method is to generates a completion signal with dummy cell and a completion signal generation circuit to indicate completion of the required read or write operation to the processor. Dividing a memory exponentially to consider delay of a bit-line and a memory cell makes memory operates as a D-I model with minimum addition of redundant circuit. The proposed memory partitioning algorithm that divides entire memory into the several partitions with a exponentially increased size reduces the memory access delay by 40% compared with a conventional partitioning method to the same size.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.1
• /
• pp.17-25
• /
• 2016

This paper proposes an ultra-low power design methodology for asynchronous circuits which combines with power switch structure used for reducing leakage current in the synchronous circuits. Compared to existing delay-insensitive asynchronous circuits such as static NCL and semi-static NCL, the proposed methodology provides the leakage power reduction in the NULL mode due to the high Vth of the power switches and the switching power reduction at the switching moment due to the smaller area even though it has a reasonable speed penalty. Therefore, it will become a low power design methodology required for IoT system design placing more value on power than speed. In this paper, the proposed methodology has been evaluated by a $4{\times}4$ multiplier designed using 0.11 um CMOS technology, and the simulation results have been compared to the conventional asynchronous circuits in terms of circuit delay, area, switching power and leakage power.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.399-408
• /
• 2022

This paper proposes a corrective control system to achieve fault-tolerant control for input/output asynchronous sequential circuits vulnerable to transient faults violating fundamental mode operations. To overcome non-fundamental mode faults occurring in transient transitions of asynchronous sequential circuits, it is necessary to determine the end of unauthorized state transitions caused by the faults and to stably take the circuit from the faulty state to a desired state that is output equivalent with the normal next stable state. We address the existence condition for a proper output-feedback corrective controller that achieves fault diagnosis and fault-tolerant control for these non-fundamental mode faults. The corrective controller and asynchronous sequential circuit are implemented on field-programming gate array to demonstrate the synthesis procedure and applicability of the proposed control scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3152-3159
• /
• 2012

This paper presents the new instruction-level power model for an asynchronous processor. Until now, the various power models for estimating the power dissipation of embedded processor in SoC are proposed. Since all of them are target to the synchronous processors, the accuracy is questionable when we apply those power models to the asynchronous processor in SoC. To solve this problem, we present new power model for an asynchronous processor by reflecting the behavioral features of an asynchronous circuit. The proposed power model is verified using an implementation of asynchronous processor, A8051. The simulation results of the proposed model is compared with the measurement result of gate-level synthesized A8051. The proposed power model shows the accuracy of 90.7% and the simulation time for estimation the power consumption was reduced to 1,900 times.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.359-362
• /
• 2000

In this paper, we propose a test pattern generation algorithm on the basis of the identification of undetectable faults for Speed-Independent(SI) asynchronous control circuits. The proposed methodology generates tests from the specification of a target circuit, which describes the behavior of the circuit in the form of Signal Transition Graph (STG). The proposed identification method uses only topological information of a target circuit and reachability information of a fault-free circuit, which is generated in the form of Binary Decision Diagram(BDD) during pre-processing. Experimental results show that high fault coverage over single input stuck-at fault model is obtained for several synthesized SI circuits and the use of the identification process as a preprocessing decreases execution time of the proposed test generation with negligible costs.

• Journal of Sensor Science and Technology
• /
• v.29 no.1
• /
• pp.68-73
• /
• 2020

This paper proposes an asynchronous circuit design methodology using a new Single Gate Sleep Convention Logic (SG-SCL) with advantages such as low area overhead, low power consumption compared with the conventional null convention logic (NCL) methodologies. The delay-insensitive NCL asynchronous circuits consist of dual-rail structures using {DATA0, DATA1, NULL} encoding which carry a significant area overhead by comparison with single-rail structures. The area overhead can lead to high power consumption. In this paper, the proposed single gate SCL deploys a power gating structure for a new {DATA, SLEEP} encoding to achieve low area overhead and low power consumption maintaining high performance during DATA cycle. In this paper, the proposed methodology has been evaluated by a liquid state machine (LSM) for pattern and digit recognition using FPGA and a 0.18 ㎛ CMOS technology with a supply voltage of 1.8 V. the LSM is a neural network (NN) algorithm similar to a spiking neural network (SNN). The experimental results show that the proposed SG-SCL LSM reduced power consumption by 10% compared to the conventional LSM.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.221-225
• /
• 2000

We designed asynchronous event logic library with 0.25$\mu\textrm{m}$ CMOS technology and interface chip for heterogeneous system with high-speed asynchronous FIFO operating at 1.6㎓. Optimized asynchronous standard cell layouts and Verilog models are designed for top-down design methodology. A method for mitigating a design bottleneck when it comes to tolerate clock skew is described. This communication scheme using clock control circuits, which is used for the free of synchronization failures, is analyzed and implemented. With clock control circuit and FIFO, high-speed communication between synchronous modules operating at different clock frequencies or with asynchronous modules is performed. The core size of implemented high-speed 32bit-interface chip for heterogeneous system is about 1.1mm ${\times}$ 1.1mm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.3
• /
• pp.33-42
• /
• 2003

This paper describes an efficient design of an asynchronous 16-bit divider using the NST (new Svoboda-Tung) algorithm. The divider is designed to reduce power consumption by using the asynchronous design scheme in which the division operation is performed only when it is requested. The divider consists of three blocks, i.e. pre-scale block, iteration step block, and on-the-fly converter block using asynchronous pipeline structure. The pre-scale block is designed using a new subtracter to have small area and high performance. The iteration step block consists of an asynchronous ring structure with 4 division steps for area reduction. In other to reduce hardware overhead, the part related to critical path is designed by a dual-rail circuit, and the other part is done by a single-rail circuit in the ring structure. The on-the-fly converter block is designed for high performance using the on-the-fly algorithm that enables parallel operation with iteration step block. The design results with 0.6${\mu}{\textrm}{m}$ CMOS process show that the divider consists of 12,956 transistors with 1,480 $\times$1,200${\mu}{\textrm}{m}$$^2$area and average-case delay is 41.7㎱.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.384-387
• /
• 1999

In this paper, we have proposed a testing methodology for Speed-Independent asynchronous control circuits using the self-checking property where the circuit detects certain classes of faults during normal operation. To exploit self-checking properties of Speed-Independent circuits, the Proposed methodology generates tests from the specification of the target circuit which describes the behavior of the circuit. The generated tests are applied to a fault-free and a faulty circuit, and target faults can be detected by the comparison of the outputs of the both circuits. For the purpose of efficient comparison, reachability information of the both circuits in the form of BDD's is used and operations are conducted by BDD manipulations. The identification for undetectable faults in testing is also used to increase efficiency of the proposed methodology. The proposed identification uses only topological information of the target circuit and reachability information of the good circuit which was generated in the course of preprocess. Experimental results show that high fault coverage is obtained for synthesized Speed-Independent circuits and the use of the identification process decreases the number of tests and execution time.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2005

Ethernet is being deployed in metropolitan area networks (MANs) as a lower-cost alternative to SONET-based infrastructures. MANs are usually required to support common communication services, such as voice and frame relay, based on legacy synchronous TDM technology in addition to asynchronous packet data transport. This paper addresses the clock synchronization problem that arises when transporting synchronous services over an asynchronous packet infrastructure, such as Ethernet. A novel algorithm for clock synchronization is presented combining time-stamp methods used in the network time protocol (NTP) with signal processing techniques applied to measured packet interarrival times. The algorithm achieves the frequency accuracy, stability, low drift, holdover performance, and rapid convergence required for viable emulation of TDM circuit services over Ethernet.