• Journal of the Korean Geotechnical Society
• /
• v.16 no.3
• /
• pp.163-172
• /
• 2000

최종침하 예측기법들은 분석상 간단명료하고 경제적인 기법이라 현장에서 널리 이용되고 있지만, 현장계측상의 문제들이 다분히 있는 실측치에 크게 의존함으로써 설계단계에서 침하량예측에 분석가의 주관적 판단이 큰 변수로 작용할 수 있으므로 객관성이 결여되는 결점을 안고 있다. 그 중 쌍곡선법(Hypervolic Method)이 가장 널리 쓰이고 있지만, 현장 계측치에 따라 가정 기본식의 선형성이 다소 뚜렷하지 않아 분석가에 따라 해석결과가 다르게 나타날 수 있으므로, 기술 적용상의 어려움과 경제적 비용을 더욱 가중시키는 결과를 초래할 수 있다. 따라서, 본 연구에서는 현장 계측자료 분석에 있어서 대표적으로 널리 적용되고 있는 쌍곡선법의 기본 가정식의 선형성 문제에 주안점을 두어 기본 가정식의 선형성을 확보하고, 그 선형구간을 확장한 새로운 침하예측기법을 제안하였다. 성토완료 직후의 현장 자료를 배수재가 설치된 지역과 배수재가 설치되지 않은 지역으로 구분하여 최종 1차 압밀침하량, 수직압밀계수 등을 기존예측기법 및 현장계측자료와 비교 검토하여 제안된 침하예측기법의 적용성을 검증하였다.

• Geotechnical Engineering
• /
• v.13 no.3
• /
• pp.5-20
• /
• 1997

A governing equation of uncoupled three dimensional finite strain theory of consolidation is presented. This equation is suitable for relatively thick layers, possessing large strain, non-linear material property, and variable permeability. A special numerical solution procedure has to be adopted for the finite difference scheme because the solution is not stable in using Forward-Time Centered-Space (FTCS) method and the governing equation is highly non-linear. The solution is capable of predicting settlement with respect to time. The results predicted by the developed method of analysis have been compared with those of experimental tests on different types of highly compressible soils with vertical wick drain. The uncoupled three dimensional finite strain theory of consolidation appears to predict settlement behavior well. A detailed comparison shows good agreement in terms of total settlement, and reasonable agreement with respect to time.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1229-1239
• /
• 1996

The increase of additional information broadcasting of TV demands a graphic overlay processor. This paper is about the design, implementation and testing of a graphic overlay processor called by KBPS decoder ASSP (Applicatio n Specific Standard Product) which is compliance with Korea Broadcast Programming System. KBPS decoder ASSP consists of embedded 8 bit microprocessor Z80, graphic overlay controller, KBPS schedule decoder, memory controller, priority interrupt controller, MIDI controller, infrared raccoon receiver, async scrial communication controller, timer, bus controller, universal parallel input-output port and serial-parallel interface. The 0.8 micron CMOS Sea of Gate is used to implement the ASSP in amount of about 31,500 gates, and it is running at 14.318MHz.

• Journal of Korea Game Society
• /
• v.3 no.1
• /
• pp.37-48
• /
• 2003

Although the user needs for computer game have been complicated and fragmented, new game development of Korean computer game developers are carried out from the developer's perspective. In the light of this limitation. This study introduces conjoint that designs an optimal new product for game users. We applied the conjoint analysis to Koran game market and found several important issues regarding Koran game users. Our results show that, regardless of game types, Korean game useis' preference mainly center on "variety of game."

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.876-888
• /
• 2001

For a large scaled optimization based on response surface methods, an efficient quadratic approximation method is presented in the context of the trust region model management strategy. If the number of design variables is η, the proposed method requires only 2η+1 design points for one approximation, which are a center point and tow additional axial points within a systematically adjusted trust region. These design points are used to uniquely determine the main effect terms such as the linear and quadratic regression coefficients. A quasi-Newton formula then uses these linear and quadratic coefficients to progressively update the two-factor interaction effect terms as the sequential approximate optimization progresses. In order to show the numerical performance of the proposed method, a typical unconstrained optimization problem and two dynamic response optimization problems with multiple objective are solved. Finally, their optimization results compared with those of the central composite designs (CCD) or the over-determined D-optimality criterion show that the proposed method gives more efficient results than others.

• Journal of Mechanical Science and Technology
• /
• v.16 no.2
• /
• pp.203-210
• /
• 2002

For effective response surface modeling during sequential approximate optimization (SAO), the normalized and the augmented D-optimality criteria are presented. The normalized D-optimality criterion uses the normalized Fisher information matrix by its diagonal terms in order to obtain a balance among the linear-order and higher-order terms. Then, it is augmented to directly include other experimental designs or the pre-sampled designs. This augmentation enables the trust region managed sequential approximate optimization to directly use the pre-sampled designs in the overlapped trust regions in constructing the new response surface models. In order to show the effectiveness of the normalized and the augmented D-optimality criteria, following two comparisons are performed. First, the information surface of the normalized D-optimal design is compared with those of the original D-optimal design. Second, a trust-region managed sequential approximate optimizer having three D-optimal designs is developed and three design problems are solved. These comparisons show that the normalized D-optimal design gives more rotatable designs than the original D-optimal design, and the augmented D-optimal design can reduce the number of analyses by 30% - 40% than the original D-optimal design.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.473-480
• /
• 2006

Recently, remote education systems for web-based teaching-studying are rapidly increased. Also, a request for customized courseware suitable for individual learner's level and learning pattern is increasing. But, most remote education systems do not provide customized learning service fit for each learner's level and lots of learners easily lose their interest in studying. Therefore, a lot of researchers have tried to provide personalized customized learning service by analyzing leaner's level and learning pattern automatically with agents. In this paper, we designed and implemented a customized courseware for studying the computer application. There are four agents such as professor, assistant, student, and monitor agent in CCA and they cooperate with each other to provide learning contents suited to each learner's level.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.27 no.2
• /
• pp.153-171
• /
• 2002

In this paper, we present an efficient pricing strategy, the pivot and probe Algorithm for Network Flow Problems(PAPANET), specifically for solving capacitated, linear network flow problem (NPs). The PAPANET begins with an initial relaxed network problem(RNP), consisting of all the nodes and initial candidate arcs(possibly a few least cost arcs form the original problem and a set of all the artificial and slack arcs). After an initial solution to the RNP is derived by pivoting, the PROBE procedure identifies a set of most violated arcs from the noncandidate arcs that are not considered to be in the current RNP, and adds them to the RNP. The procedure also discards a set of least favorable, zero flow, nonbasic arcs from the RNP. The new RNP is solved to optimality and the procedure continues until all of the dual constraints of the noncandidate arcs are satisfied by the dual solution to the RNP. The PAPANET effectively reduces the problem size, time per pivot, and solution CPU time by eliminating noncandidate arcs. Computational tests on randomly generated problems indicate that PAPANET achieves and average savings of 50-80% of the solution CPU time of that of a comparable standard network simplex implementation.

• Journal of Korean Academic Society of Home Health Care Nursing
• /
• v.22 no.1
• /
• pp.38-46
• /
• 2015

Purpose: This study aimed to determine the levels of burnout, self-efficacy, intention to stay, and organizational citizenship behavior (OCB) among nurses in small- and medium-sized hospitals, and factors related to nurses' OCB. Methods: A targeted sampling method was adopted, whereby 185 clinical nurses employed at 1 of 4 hospitals were enrolled in the study. OCB was measured with a tool developed by Podsaoff et al. Associated factors, including nurses' general characteristics, burnout, self-efficacy, and intention to stay, were measured using a structured survey. Data were analyzed by frequencies, t-test, ANOVA, Duncan's multiple test, Pearson Correlation Coefficient and multiple stepwise regression. Results: Levels of OCB in nurses was on average 3.52 on a scale of 1 to 5, exhibiting a positive correlation with self-efficacy and intention to stay, and a negative correlation with burnout. The final related factors were self-efficacy, burnout and intention to stay with a predictive and explanatory power of 52% for OCB. Conclusion: To increase the level of OCB of nurses, an environment in which such behavior is encouraged needs to be established by introducing measures related to administrative support and task efficiency that reduces mental burnout, while increasing self-efficacy and intention to stay.

• Journal of Biosystems Engineering
• /
• v.26 no.1
• /
• pp.47-56
• /
• 2001

In order to prevent the possibility of mixing of metal powder during food grinding processing with the metal roll mill this study was conducted to develope the materials of ceramics roll as a substitute of gray cast iron mill. Since the ceramics is brittle material and can be broken easily by a crack, it was needed to develope engineering ceramics roll materials with high elastic modulus and fracture toughness. Adding 0∼50 wt% Al$_2$O$_3$as densification additives to porcelain body material and forming the ceramics an different condition, mechanical properties were evaluated. The material structure’s densification process was analyzed by SEM and XRD. The evaluation of the mechanical properties of ceramics roll materials were compared and analyzed by non-destructive test using Young’s modulus and destructive test using 3-point bending strength and fracture toughness. The results showed several correlative results. Porcelain body material with 40 wt% Al$_2$O$_3$content heated at 1,200$\^{C}$ for 5h was high bulk density of 2.77, Young’s modulus of 118.4Gpa, 3-point bending strength of 137 MPa and fracture toughness of 2.88 MPa$.$m$\^$$\sfrac{1}{2}$/ . After analyzing the relationship between non-destructive test and destructive test, the coefficient of determination was more than 0.9. Therefore, the evaluation of non-destructive test by ultrasonic was turned out to be feasible in evaluating the mechanical properties of ceramics.