• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.5
• /
• pp.395-405
• /
• 2001

To make an assessment of the compatibility between DOAS and conventional point monitoring system (MCSAM-2: MS2), we investigated the concentrations of three criteria pollutants which include S $O_2$, N $O_2$, and $O_3$from a national monitoring station in Seoul during the periods of June 1999~August 2000. The average concentration values for the whole study period derived from hourly concentration data sets of those three species indicated that the mean differences between the two methods can be approximated as 18%. When the bias structure of two systems was evaluated through the computation of percent difference(PD) between the two such as ( $C_{DOAS}$- $C_{conventional}$ $C_{DOAS}$*100, differences between the two systems appeared to be quite systematic among different compounds. While the mode of bias peaked at 0~20% or 20~40% in terms of PD values, the cause of such positive bias mainly arised from generally enhanced concentration values of DOAS system. The structure of bias among different species was further assessed through linear regression analysis. Results of the analysis indicated that the dominant portions of differences observed from two monitoring systems can be accounted for by the systematic differences in their spanning and zeroing systems. S $O_2$(MS2)=0.6385 S $O_2$(DOAS)+2.0985($r^2$=0.7894) N $O_2$(MS2)=0.6548 N $O_2$(DOAS)+7.437($r^2$=0.7687) $O_3$(MS2)=1.0359 $O_3$(DOAS)-7.7885($r^2$=0.7944) The findings of slope values at around 0.64~0.65 from two species suggest that DOAS should respond more sensitively in upper bound concentration range. The offset values apart from zero indicate that more deliberate comparison needs to be made between these monitoring systems. However, based on the existence of strong correlations from at least 8,000 data points for each species of comparison, we were able to conclude that the compatibility of two monitoring systems is highly significant. With the improvement of calibration techniques for the DOAS system. its applicability for routine monitoring of airborne pollutant species is expected to be quite extendable.

• Journal of Engineering Education Research
• /
• v.10 no.1
• /
• pp.77-85
• /
• 2007

Though accreditation demands considerable ongoing effort on the part of the college, about 10 percent of Korean engineering colleges has been accredited for 5years by ABEEK. It is true that engineering accreditation contributed the Korean engineering education to improve. Many engineering colleges which had prepared the engineering accreditation developed the integrating system for the engineering education, and over 50 engineering education research centers which assisted to programs in accreditation were founded. Also the faculty commitment to quality programs and excellence in teaching, continuous counseling for students, portfolio guiding and continuous quality improvement(CQI) etc. were performed for accreditation preparation. The engineering colleges preparing accreditation has made efforts for satisfying accreditation criteria, but it is difficult of modifying education systems which have been maintained by now. In addition, engineering colleges need guideline how to satisfy standards. The purpose of this study is to analyze draft statement of 4 universities which were evaluated in 2006 and to suggest the minimal resources for engineering colleges to prepare accreditation.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.2
• /
• pp.407-419
• /
• 2017

In this paper, we aim to evaluate the effect of simulation training with a focus on the application of SBAR for the improvement of communication skills of nursing students with physician. The results of the analysis of 25 videos recorded pre/post-simulation were as follows: In terms of the SBAR score, "the most recently measured vital signs" in stage B increased significantly (Z = -2.448, p =.014); the frequency of step-by-step progress in SBAR did not advance to the SBA or SBAR stage in the pre-simulation stage, but increased to 48% post-simulation. The frequencies of SBAR evaluation items mentioned in the post-simulation were the following order: the name of the patient (96%), nurse's name (80%), most recently measured oxygen saturation (76%), and main symptoms (60%). The results of the nurse's judgment (A), request for additional prescription or request for the doctor's direct patient visit (R) were not mentioned. Therefore, it is necessary to consider the application of SBAR in simulation training, which requires problem solving through cooperation with physicians, because it has a positive effect on education in nurse-physician communication.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.29-38
• /
• 2013

The G-class cement is commonly used in practice for geothermal well cementing in order to protect a steel casing that is designed to transport hot water/steam from deep subsurface to ground surface during operating a geothermal power plant. In order to maintain optimal performance of geothermal wells, physical properties of the cementing material should be satisfactory. In this paper, relevant factors (i.e., groutability, uniaxial compression strength, thermal conductivity and free fluid content) of the G-class cement were experimentally examined with consideration of various water-cement (w/c) ratios. Important findings through the experiments herein are as follows. (1) Groutability of the G-class cement increases by adding a small dose of retarder. (2) There would be a structural defect caused when the w/c ratio is kept higher in order to secure groutability. (3) Thermal conductivity of the G-class cement is small enough to prevent heat loss from hot steam or water to the outer ground formation during generating electricity. (4) The G-class cement does not form free water channel in cementing a geothermal well. (5) The Phenolphthalein indicator is applicable to the distinction of the G-class cement from the drilling mud.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.335-342
• /
• 2013

Since the seriousness of environmental pollution came to the fore recently, various efforts have been made globally for the reduction of the environmental load. In particular, in the field of construction, an industry responsible for a considerable amount of pollution, studies have been actively conducted to reduce $CO_2$ emissions and energy consumption. However, most conventional research about pollution as it relates to construction is focused on the maintenance stages where $CO_2$ emissions are the greatest. Research related to the design stage is in its infancy, as it has only been conducted thus far on steel buildings and RC buildings. In fact, in order to achieve environmentally friendly construction considering the Life Cycle Assessment(LCA), the building design should be derived to reduce the $CO_2$ emissions from the early building design stage, and structural engineers should be able to suggest a design plan considering its environmental friendliness. In this study, optimal structural design method for steel reinforced concrete(SRC) columns considering $CO_2$ emissions is presented. The trends of $CO_2$ emissions in SRC columns according to the variations of steel shapes, concrete strengths and loads are investigated.

• Food Science and Preservation
• /
• v.20 no.2
• /
• pp.158-165
• /
• 2013

This study aimed at investigating the quality changes of Yukwa during storage using the various item packaging methods present in the domestic market. The samples consisted of a self-adhesive-oriented polypropylene (OPP) film pouch (P1), a heat-sealed OPP film pouch (P2), and a polystyrene (PS) tray with a polyethylene terephthalate (PET) lid (P3). These were stored at $25^{\circ}C$ up to eight weeks. Throughout the storage period, the acid values of all the study samples remained under the Korean hygiene regulation limit of 2.0 mg KOH/g. The P2 samples showed both the slowest decrease in water content and the slowest increase in hardness value during storage. Sensory evaluation also showed that the P2 samples were the only ones that maintained their market value of 5.0 throughout the eight-week assessment period.

• Journal of Navigation and Port Research
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2018

This study covers the selection of systems measuring the behaviour of the slender structure in the underwater environment and its performance assessment. From a comparison of an instrumentation system that can measure the continuous behaviour along the entire length of the slender structure, the underwater camera system is finally selected as the most appropriate semi-permanent measurement system for Deep-sea Ocean Engineering Basin of KRISO. An experiment on the rigid pipes for a basic performance evaluation of the underwater camera is conducted in this study. The motion of a top excited rigid pipe is measured with the utilization of the underwater camera system. The performance of the underwater camera is evaluated by comparing the movement of a pipe measured by the underwater camera with the measured input signals. Through the top excitation experiment for the slender structure, the real-time three-dimensional measurement of the underwater camera system is qualitatively evaluated in this case. The developed underwater camera system can apply to the system to measure dynamic behaviour of a slender structure and mooring line in Deep Ocean Engineering Basin.

• Journal of Korean Elementary Science Education
• /
• v.40 no.3
• /
• pp.366-389
• /
• 2021

The purpose of this study is to extract the factors that compose the image of science teacher desired by elementary school students in inquiry-based instruction and analyze the structural associations between them. Factors that compose the image of science teacher desired by elementary school students in inquiry-based instruction were extracted through exploratory factor analysis (EFA). Based on the findings of EFA, the questionnaire has been further analyzed using confirmatory factor analysis (CFA). In addition, based on the factor structure identified through factor analysis, we comprehensively analyzed the image of science teacher desired by elementary school students in inquiry-based instruction. As a result of EFA, five factors were identified which compose the image of science teacher desired by elementary school students in inquiry-based instruction: namely, teaching strategy, assessment strategy, prior guidance, understanding students, learning development. The CFA results showed a relatively strong correlation between teaching strategy and learning development, teaching strategy and understanding students. As a result of a comprehensive review of students' perception of the image of science teachers in inquiry-based instruction based on the extracted factor structure, students perceived that it is important for science teachers to run inquiry-based instruction by reflecting their understanding of students. Students also perceived importantly that science teachers run inquiry-based instruction using effective teaching strategies and proper evaluation strategies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.145-150
• /
• 2019

The purpose of this study was to investigate farmers' field survey to improve animal welfare certification standards and to obtain basic data on the animal welfare level for certified farmers to develop evaluation methods of animal welfare level suitable for domestic farm environment. The subjects of the study were selected 10 animal welfare laying certified farmhouses. The farming certified farming facility survey collected breeding form, head, feed and drink space, breeding density, length and shape of perch. Animal welfare was assessed by the presence of sand bath, spawning, enrichment measures, free range, feathers pecking. The results of the study showed that most the certified animal welfare laying hens complied with the certification standards. All the farms were providing the nest box, but there were farms with more than 20% of the spawning rate. The perches were provided in sufficient length, but only three of ten farms were using rounded perches. Feather damage has been identified in most survey farms, which is likely to be due to feather damage caused by roosters producing both fertilized eggs. In this study, 10 farm households were surveyed. It was not possible to represent the whole certified farmhouse. Therefore, it should be analyzed thoroughly to evaluate the level of animal welfare.

• Journal of Korea Water Resources Association
• /
• v.54 no.2
• /
• pp.81-91
• /
• 2021

Synthetic Apreture Radar (SAR) is attracting attentions with its possibility of producing high resolution data that can be used for soil moisture estimation. High resolution soil moisture data enables more specific observation of soil moisture than existing soil moisture products from other satellites. It can also be used for studies of wildfire, landslide, and flood. The SAR based soil moisture estimation should be conducted considering vegetation, which affects backscattering signals from the SAR sensor. In this study, a SAR based soil moisture estimation at regions covered with various vegetation types on the middle area of Korea (Cropland, Grassland, Forest) is conducted. The representative backscattering model, Water Cloud Model (WCM) is used for soil moisture estimation over vegetated areas. Radar Vegetation Index (RVI) and in-situ soil moisture data are used as input factors for the model. Total 6 study areas are selected for 3 vegetation types according to land cover classification with 2 sites per each vegetation type. Soil moisture evaluation result shows that the accuracy of each site stands out in the order of grassland, forest, and cropland. Forested area shows correlation coefficient value higher than 0.5 even with the most dense vegetation, while cropland shows correlation coefficient value lower than 0.3. The proper vegetation and soil moisture conditions for SAR based soil moisture estimation are suggested through the results of the study. Future study, which utilizes additional ancillary vegetation data (vegetation height, vegetation type) is thought to be necessary.