• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.455-466
• /
• 2014

This study has been implemented to improve the quality in geriatric hospital through the Hospital Accreditation. So research a change in the perception and attitude of the Patient Safety, Organizational Culture, Job Satisfaction, Financial Performance of hospital staff after the Hospital Accreditation. For this, a survay was conducted from April 1 to July 20, 2014 to targeting staffs of eight geriatric hospital in the Busan city. Thus, a total of 283 questionnaires were used in the study. Firstly, It was found that change in the perception and attitude of the Patient Safety, Organizational Culture, Job Satisfaction, Financial Performance of hospital staff after the the Hospital Accreditation. Secondly, It was found that a statistical correlation among variables such as Patient Safety, Organizational Culture, Job Satisfaction, Financial Performance. Thirdly, Organizational Culture, Job Satisfaction, Financial Performance had a positive effect on Patient Safety. Therefore, we should develop the Hospital Accreditation program with the internal assessment to implement health care quality and patient safety to ensure a complete job satisfaction of hospital staffs in the Hospital Accreditation program further improve the evaluation process of hospital care.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.501-518
• /
• 2019

The rock properties measured under in-situ geological condition can be used to increase the reliability in numerical simulations with regard to the long-term performance of a high-level waste repository. In this study, the change in mechanical properties of KURT (Korea atomic energy research institute Underground Research Tunnel) granite was evaluated under the simulated THM (Thermo-Hydro-Mechanical) coupled condition due to a deep geological formation in the disposal repository. The rock properties such as uniaxial compression strength, indirect tensile strength, elastic modulus and Poisson's ratio were measured under the coupled test conditions (M, HM, TM, THM). It was found that the mechanical properties of KURT granite is more susceptible to the change in saturation rather than temperature within the test condition of this study. The changes in uniaxial compression strength and indirect tensile strength from the rock samples of dried or saturated conditions showed the maximum relative error of about 20% and 13% respectively under the constant temperature condition. Therefore, it is necessary to use the material properties of rock measured under the coupled THM condition as input parameters for the numerical simulation of long-term performance assessment of a disposal repository

• Resources Recycling
• /
• v.31 no.1
• /
• pp.56-64
• /
• 2022

Construction waste is generated at a rate of approximately 221,102 tons/day in Korea. In particular, mixed construction waste generates approximately 24,582 tons/day. The other components were recycled by 98.9%. The amount of greenhouse gas emissions from the waste was 17.1 million tons of CO2 equaling 2.3% of the total greenhouse gas emissions. To reduce greenhouse gas emissions, reducing the environmental impact is becoming increasingly important. However, appropriate treatment must first be established, as mixed construction waste is also increasing. Thus, an effective plan is urgently needed because it is frequently segregated and sorted by the landfill and incinerated. In addition, there is an urgent need to prepare various effective recycling methods rather than a simple treatment. Therefore, this study analyzed the environmental impact of the treatment of mixed construction waste by calculating greenhouse gas emissions. As a result, the highest greenhouse gas generation occurred during the incineration stage. Moreover, the optimal method to reduce greenhouse gas emissions is recycling and energy recovery from waste. In addition, the amount of greenhouse gas generated during energy recovery from the waste stage was the second highest. However, greenhouse gas emissions can be reduced by using waste as energy to reduce fossil fuel consumption. In addition, for the transportation stage, the optimal reduction plan is to minimize the amount of greenhouse gas emissions by setting the optimal distance and applying biofuel and electric vehicle operations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.709-719
• /
• 2023

In general, most of the electrical equipment responsible for control within power plants is housed in self-standing cabinets. These cabinets are typically fixed to a slab using post-installed anchors. Although the fixation method of using post-installed anchors provides stability, there is a risk of conductor failure due to external forces, including moments. However, the performance assessment of current anchors is only evaluated through uniaxial material tests. Therefore, the primary purpose of this study is to compare the static performance of post-installed anchors, considering on-site installation conditions, with their performance in material tests and to analyze the behavioral characteristics of the anchors. While conducting experiments using actual cabinets would be ideal, practical and spatial constraints make this approach difficult. As an alternative, experiments were conducted using a test specimen consisting of a steel column and a support. As a result, the pull-out performance of anchors reflecting on-site installation conditions was measured to be about 10% higher than that observed in material tests. The trends in load reduction and the point of maximum performance for the anchors also differed. To verify the reliability of the experimental study, a 3D FEM analysis was performed, which will provide predictive information on the loads transferred to the post-installed anchors for structural performance evaluations of electrical cabinets using shaking table test in the future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.875-881
• /
• 2013

The failure of a bolted joint owing to stress corrosion cracking (SCC) has been considered one of the most important structural integrity issues in a nuclear power plant. In this study, the failure possibility of bolting, which is used to support the steam generator of a pressurized water reactor, owing to SCC and brittle fracture was evaluated in accordance with guidelines proposed by the Electric Power Research Institute, which are called the Reference Flaw Factor method. For this evaluation, first, detailed finite element stress analyses were conducted to obtain the actual nominal stresses of bolting in which either service loads or bolt preloads were considered. Based on these nominal stresses, the structural integrity of bolting was addressed from the viewpoints of SCC and toughness. In addition, the accuracy of the EPRI Reference Flaw Factor for assessing bolting failure was investigated using finite element fracture mechanics analyses.

• Journal of The Korean Association For Science Education
• /
• v.34 no.2
• /
• pp.187-195
• /
• 2014

In this study, we investigated the characteristics of lesson planning of pre-service secondary science teachers and the factors which influenced in their lesson planning. Thirteen pre-service secondary science teachers at a college of education in Seoul participated in this study. Teaching-learning materials such as lesson plans and handouts, and lesson planning journals written by the pre-service teachers were collected. Semi-structured interviews were also conducted to obtain information about their lesson planning activities. The analyses of the results revealed that most of the pre-service teachers did not systematically consider the national science curriculum and focused on planning one lesson only. Instructional objectives were not only considered as minor element in lesson planning, but also limited to cognitive domain. Devising teaching-learning strategies was found to be the starting point of the lesson planning. They accommodated constructivistic teaching-learning theory presented in their method courses through reflective evaluation of the experiences of learning in their secondary schools. The experiment activities that were presented in the textbooks were used themselves when they planned experiments as student activities, but other activities were planned depending on their personal experiences. Most pre-service teachers did not plan assessment because they could not recognize it as an element of lesson planning. These results may offer some implications in educating pre-service secondary science teachers on lesson planning.

• Journal of Energy Engineering
• /
• v.29 no.3
• /
• pp.64-73
• /
• 2020

This paper presented a methodology for calculating daily load curves per city by taking into account the charging/discharging location of electric vehicle. In other words, this is the daily load curve calculation algorithm by city, which takes into account the charging/discharging location of electric vehicles, so that the impact of loads generated by charging/discharging of electric vehicles on the power grid can be easily understood in certain cities. Specifically, in accordance with the PEVs share scenario, the PEVs discharge power was calculated to reflect both the characteristics of the arriving vehicle in the morning and the SMP plan after establishing a assumption that the electric vehicle arrived at work in the morning and the electric vehicle arrived at home in the afternoon for each of the charging/discharging locations, that is, work and home, of electric vehicles in the city. After calculating the daily load curve for each charging/discharging power type for the PEVs charging strategy, which takes into account both the characteristics of the vehicle arriving at home in the afternoon and the TOU fare system, it was analyzed by comparing the impact assessment on the grid by adding the existing load.

• Journal of Korea Water Resources Association
• /
• v.42 no.6
• /
• pp.505-511
• /
• 2009

When replacing deteriorated pipes, it is important to select pipe diameters of new pipes for improving the long-term reliability of a water distribution system. However, as the use of larger diameter pipes brings cost increase, it is required to evaluate the improvement of the reliability by the use of larger diameter pipes. In this study, we propose a methodology to evaluate the improvement of the reliability by the use of different pipe diameters. For this purpose, we rely on the segment-based minimum cutset method with the success mode approach to evaluate the reliability of a water distribution system and determine which pipes and their diameters will be replaced to improve the reliability using GA, After the suggested method is applied to a real water distribution system, the optimized pipe diameters produces higher reliability of the system than the current ones with the same construction cost. However, compared to the increase rate of the construction cost, the improvement of the reliability is not significant. Thus, in addition to the use the different pipe diameters, the structural modification or adding new valves to the system is necessary to improve the reliability efficiently.

• 대한공업교육학회지
• /
• v.40 no.1
• /
• pp.23-39
• /
• 2015

The purposes of this study were to evaluate the effectiveness of teacher training program for specialized school teacher in invention patent field and to explore the program improvement ideas. The study was carried out through on survey method and using program evaluating model developed for this study. The study subjects are 39 specialized high school teacher participated in training program about invention patent field at CNU-IECT(Invention education center for teacher). The data collection was done on August 2, 2014. The 37 questionnaies were analyzed. The educational needs of the training program were calculated by using the Borich(1980)'s needs assessment formula. The evaluating model was developed by the team. Major findings of this study were as follows; First, the training needs of specialized high-school teachers was high. Second, the satisfaction of the training program was high. Third, the overall effectiveness of training programs was high. Fourth, the improvement ideas were divided into four area - 1)The status quo area, 2) the alternatives exploration area, 3) the strategy modifications area, 4) the expected expansion area.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.31-42
• /
• 2004

This study develops Accident Modification Factors (AMF) of countermeasures with Baysian method which are newly proposed for reducing Roadway-Rail grade crossing accidents. This study proposes a new "Bayesian Analytical Framework" for countermeasure assessment which combines "Subjective" Prior Information with "Logical" based Information. The newly proposed "Bayesian Analytical Framework" consists of the following three steps: The 1st step - Countermeasure Selection, Choice of Participants, Selection of Crashes; The 2nd step-Development of Crash History Manual and Countermeasure Evaluation Manual; The 3rd step-Development of AMFs through sound statistical tests. This study used the Komogorov-Smirnov(K-S) Test to determine whether two unknown distribution functions associated with the two populations are identical. The results of the study are that individual responses did not meet the K-S test of identical distributions. while individual vs. group distributions are identical. This indicates that combining the input of several people reduces the impact of individual subjectivity and assumptions and is important for developing a repeatable distribution to develop sound AMFs of countermeasures for reducing Roadway-Rail grade crossing accidents. The procedures of the AMF development conducted in this study can be used to estimate the safety effects of countermeasures for road segments and intersections, in addition to Roadway-Rail grade crossings.