• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.98.2-98.2
• /
• 2011

For optimal performance of a proton exchange membrane fuel cell (PEMFC), the membrane electrode assembly (MEA) requires hydration, and the membrane's conductivity depends on water content. A humidifier is required to ensure that the reactant gas, usually hydrogen and air, is hydrated before entering the fuel cell. Dry membrane operation or improper hydration causes performance degradation. Typically, the humidification of a fuel cell is carried out by means of an internal or external humidifier. A membrane humidifier is applied to the external humidification of transportation or residential power generation fuel cell due to its convenience and high performance. In this study, The experiments were constructed with a plate-type membrane humidifier in terms of geometric parameters and operating parameters. The results show that the temperature and pressure, the channel length, the membrane thickness and gas flow rate are critical parameters affecting the performance of the humidifier.

• Journal of the Korean Society for Library and Information Science
• /
• v.50 no.4
• /
• pp.121-142
• /
• 2016

The purpose of this study was to assess the economic value of the National Assembly Library service utility, and to enhance the users' perception and the stakeholder's supports for the library services. For those purposes, this study applied the measurement methods of time value, replacement service value, and WTP of the three user groups: inside members, outside users, and institutional members of the Library. The replacement service value as annual time valuation was measured 1,948.2 million won by inside members, and 417.057.5 million won by outside users, that was approximately 10 times of the total budget of the year 2015. Also, WTP were measured as 8,528.3 million won by inside member, 33,272.4 million won by outside users, 924 million won by institutional members. This shows 77% of the use value were from outside users. The BC ratio was 1:1.04 in 2015.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.3
• /
• pp.181-190
• /
• 2019

Today, in the information society, since the government administration of all countries places importance on clarity and efficiency, the authority concentration of the administration is inevitable. Therefore, the Parliament, which is a legislative body, is at a time when the policy control function to check and monitor it is becoming more important. In particular, due to the emergence of parliamentary democracy, in the reality that the people must elect representatives and represent their own opinions, the parliamentary inspection system is very valuable in that it satisfies the right of the people to know and ultimately enables the people to democratically control the administration. The role of the Parliament moves from the inherent legislative function to the information collection and disclosure of government administration, discussion and resolution of political issues, and observation and supervision of the administration. And it can be seen as the global trend. As a result of this trend, status and role of the National Assembly is being strengthened from the legislative body to the control agency of government administration. Thus, the most substantive authority of Article 61 of the Constitution can be deemed the parliamentary inspection system. The parliamentary inspection system is a system that let exercise the legislation, budget, and authority to control of state administration by identify the challenges and policy implementation of each country's institutions through the audit of the executive administration's overall government administration performance outside the National Assembly. However, due to the amendment of Constitution in 1988, the parliamentary inspection right and investigation of state administration right had reinstated and the parliamentary inspection system, which is being implemented annually, is the 31st year of the year in 2019. However, the general evaluation of the public is negative and insufficient time for inspections, lack of sanctions on nonattendance witnesses, excessive data submission, and refusal to submit materials by the administration were pointed out as the problem. Therefore, in this paper, the researcher tries to point out the overall problems of the parliamentary inspection system and to summarize the effective improvement plans.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.19 no.3
• /
• pp.307-319
• /
• 2013

Purpose: The purpose of this study was to review nursing studies with regard to simulation- based learning in Korea. Methods: This systematic review examines the literature on simulation in nursing education from 2003 to 2012. The electronic databases reviewed included: RISS, the National Assembly Library, the National Library of Korea, and major nursing journal databases in Korea. The MeSH search terms included nursing, simulation, simulator, and standardized patient. Results: In total, 52 studies were included in the literature review. We included 21 quasi-experimental studies and 25 studies using high-fidelity simulation. They included knowledge and problem-solving ability in the cognitive domain; self efficacy, learning satisfaction, interpersonal relationships and communication, and confidence in the affective domain; and clinical performance ability and learning performance evaluation in the psychomotor domain. This systematic literature review revealed that simulation is useful in nursing education but uncovered a gap in the literature pertaining to the transfer of knowledge to performance and how to learn from cognitive reflection. Conclusions: This result suggests that it is necessary to conduct additional research on the cognitive learning process and transition to performance.

• Journal of Home Health Care Nursing
• /
• v.22 no.1
• /
• pp.59-68
• /
• 2015

Purpose: The purpose of this study was to analyze nursing research using data envelopment analysis and suggest directions for future research. Methods: We established -criteria literature search. e reviewed 45 from RISS, KISS, National assembly library and NDSL DB. Data were collected on December 17, 2013. developed analytic framework of literature reviews using Yun's study. This framework had 8 items related to approach of data envelopment analysis. Results: literature established -criteria. Average numbers of input and output variables were 2.4 and 4.2, respectively. All selected research conducted efficiency analysis, analysis, and inefficiency analysis. However only 3 research. Conclusion: he results of studysuggest that data envelopment are needed to enhance efficiencies of nursing organization as follows individual nurse's profiling to develop customized performance management plans; patient centered nursing interventions; and financial performance financial reports.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.489-493
• /
• 2005

TFT-LCD(Thin Film Transistor Liquid Crystal Display) module is representative commercial product of FPD(Flat Panel Display). Thickness of TFT-LCD module is very thin. It is adopted for major display unit for IT devices such as Cellular Phone, Camcorder, Digital camera and etc. Due to the harsh user environment of mobile IT devices, it requires complicated structure and tight assembly. And user requirements for the mechanical functionalities of TFT-LCD module become more strict. However, TFT-LCD module is normally weak to high level transient mechanical shock. Since it uses thin crystallized panel. Therefore, anti-shock performance is classified as one of the most important design specifications. Traditionally, the product reliability against mechanical shock is confirmed by empirical method in the design-prototype-drop/impact testredesign paradigm. The method is time-consuming and expensive process. It lacks scientific insight and quantitative evaluation. In this article, a systematic design evaluation of TFT-LCD module for mobile IT devices is presented with combinations of FEA and testing to support the optimal shock proof display design procedure.

• Journal of Hydrogen and New Energy
• /
• v.28 no.5
• /
• pp.471-480
• /
• 2017

A proton exchange membrane fuel cell (PEMFC) operated at $150^{\circ}C$ was evaluated by a controlling different amount of phosphoric acid (PA) to a membrane-electrode assembly (MEA) without humidification of the cells. The effects on MEA performance of the amount of PA in the cathode are investigated. The PA content in the cathodes was optimized for higher catalyst utilization. The highest value of the active electrochemical area is achieved with the optimum amount of PA in the cathode confirmed by in-situ cyclic voltammetry. The current density-voltage experiments (I-V curve) also shows a transient response of cell voltage affected by the amount of PA in the electrodes. Furthermore, this information was compared with the production variables such as hot pressing and vacuum drying to investigate those effect to the electrochemical performances.

• Nuclear Engineering and Technology
• /
• v.41 no.4
• /
• pp.531-544
• /
• 2009

This paper is intended to provide key issues and current research outcomes on accelerator-based Boron Neutron Capture Therapy (BNCT). Accelerator-based neutron sources are efficient to provide epithermal neutron beams for BNCT; hence, much research, worldwide, has focused on the development of components crucial for its realization: neutron-producing targets and cooling equipment, beam-shaping assemblies, and treatment planning systems. Proton beams of 2.5 MeV incident on lithium target results in high yield of neutrons at relatively low energies. Cooling equipment based on submerged jet impingement and micro-channels provide for viable heat removal options. Insofar as beam-shaping assemblies are concerned, moderators containing fluorine or magnesium have the best performance in terms of neutron accumulation in the epithermal energy range during the slowing-down from the high energies. NCT_Plan and SERA systems, which are popular dose distribution analysis tools for BNCT, contain all the required features (i.e., image reconstruction, dose calculations, etc.). However, detailed studies of these systems remain to be done for accurate dose evaluation. Advanced research centered on accelerator-based BNCT is active in Korea as evidenced by the latest research at Hanyang University. There, a new target system and a beam-shaping assembly have been constructed. The performance of these components has been evaluated through comparisons of experimental measurements with simulations. In addition, a new patient-specific treatment planning system, BTPS, has been developed to calculate the deposited dose and radiation flux in human tissue. It is based on MCNPX, and it facilitates BNCT efficient planning based via a user-friendly Graphical User Interface (GUI).

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.102-110
• /
• 2023

The MATS(Missile Assembly Test Set) is manufactured and used to check the function of the missile during the period of development for the guided missile system, and the requirements for power and communication are managed for equipment production. The MATS developer implements software according to the proposed communication standard to guarantee the reliability of the data that communicates with the guided missile. The test bed is built and self-performance evaluation is performed after implementation. And the verification process is performed using the standard equipment. The characteristics of periodic delay for data transmission must be reflected when building a test bed. This paper describes a test bed construction method for data processing with periodic delay. Also This paper compares and evaluates the performance by changing the previously designed algorithm.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.201-209
• /
• 1998

To develop timely an optimal fan, a design system and a new manufacturing process used step by step have to be integrated. A small sized optimal fan for refrigerators, that was the goal on this project, was developed by the following principal processes. All processes are technologically linked in many directions: The existing fan was measured through reverse engineering. The measured data was used for the basic source of 3D design. The performance tests were carried and used as the data for the evaluation of the existing fan. Flow analysis by FANS-3D/sup [1]/ was performed at the given information (pressure drop and flow rate) to find out the configuration of optimal fan design. The flow patterns were investigated to measure the performance of fan through numerical experiment. The grid point data obtained by the above analysis turned into 3D high efficiency fan model by using CATIA. The product was manufactured by RP process (SLS, SLA) and tested the characteristic curves of the developed fan to compare with the existing fan. The modification of fan design were all examined to see any change in performance and checked to find any deficiency in assembling the fan into a duct. After the plastics flow analysis of the injection molding cycle to ensure acceptable quality fan, an optimal mold was processed by using tool-path for the newly designed fan.