• Journal of Life Science
• /
• v.28 no.7
• /
• pp.864-873
• /
• 2018

There has been increasing attention and research in various nanoparticle applications. Nanoparticles have been used for a variety of purposes in different departments including but not limited to cosmetics, food, machinery, and chemical. A highly sought-after field to use nanoparticles, especially natural or artificial silver nanoparticles (SNPs), is the utilization of their significant antimicrobial properties in daily items such as fabrics, indoor air filters, and, water filtration units where abundant bacterial and fungal growth are inevitable. These applications of SNPs, however, have enabled continuous human exposure and hence paved the way for potential SNP toxicity depending on exposure method and particle size. This potential toxicity has led to researches on safer antimicrobial solutions to be utilized in textile and filtration. In this context, products of natural origin have gained expanding interest due to their eco-friendly, cost-effective, and biologically safe properties along their promising antibacterial and antifungal activities. Natural product-applied fabrics and filters have been shown to be comparable to those that are SNP-treated in terms of ease production, material durability, and antimicrobial efficiency. This article summarizes and assesses the current state of in vitro and in vitro toxicity of SNPs and discusses the potential of natural products as an alternative.

• Microbiology and Biotechnology Letters
• /
• v.37 no.2
• /
• pp.140-146
• /
• 2009

Cyclosporin, an immunosuppressant, is a representative group of biologically active secondary metabolites produced by the fungus Tolypocladium inflatum. The amount and ratio of cyclosporin derivatives in the culture broth are an important factors for the production of cyclosporin A and the purification in the industrial process. Therefore, we studied the effect of amino acids and complex organic nitrogen sources using Tolypocladium inflatum mutants on the productivity of cyclosporin A and the ratio of cyclosporin derivatives. Overproducing mutant YHC-004 having seven times higher productivity than mother strain's could be obtained through the artificial mutation by UV irradiation. The concentration and kind of organic nitrogens and amino acids shows the profound effect on the productivity of cyclosporin A and ratio of cyclosporin derivatives. As a result, it was possible to raise the productivity and the ratio of cyclosporin A up to 3,430 mg/L and 93% respectively, but on the other hand the other cyclosporin derivatives decreased less than 2% in the culture broth.

• Journal of Environmental Health Sciences
• /
• v.34 no.1
• /
• pp.86-94
• /
• 2008

Lake Shiwha, an artificial lake located near metropolitan Seoul, offers a unique water environment and has been suspected to have high levels of chemical and microbiological contaminations. Lake Shiwha was originally connected to the sea but currently has four major surface water inputs from agricultural, municipal, industrial areas and in addition an occasional inflow from the sea. The objectives of this study are to investigate the relative contribution of microbial contaminants from each of the inflowing surface waters and to identify appropriate microbial indicator organisms in this unique water environment. We measured the levels of microbial contaminations in the four inflowing surface waters. A number of microbial indicator organisms including total coliform (TC), fecal coliform (FC), E. coli, Enterococci, somatic and male-specific coliphages were analyzed. Bacterial indicator microorganisms were detected and quantified by the $Colilert^{(R)},\;Enterolert^{(R)}$ kit. Surface water (50 l) was sampled by $ViroCap^{TM}\;5"$ cartridge filters and analyzed by the single agar layer method for detecting coliphages. The concentrations of TC, FC, E. coli, and Enterococci were 1543 CFU/100 ml${\sim}1.99{\times}10^6$ CFU/100 ml, 0 CFU/100 ml${\sim}202$ CFU/100ml, 0 CFU/100 ml${\sim}1.80{\sim}10^5$ CFU/100ml, 74 CFU/100 ml${\sim}3408$ CFU/100 ml, respectively. The male-specific and somatic coliphages were detected in three different inflowing surface waters. Isolated E. coli and Enterococci strains were further analyzed by 16s rDNA amplification and subsequent phylogenetic analysis from Jungwang-chun, Ansan-chun, Banwol-chun and penstock of inflowing surface water. Our results indicated that the concentrations of different fecal indicator microorganisms might not be highly correlated with each other. Multiple microbial indicator organisms should be used for monitoring microbial contamination and microbial source tracking methods.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1121-1121
• /
• 2001

A previous study (Berzaghi et al., 2001) evaluated the performance of 3 calibration methods, modified partial least squares (MPLS), local PLS (LOCAL) and artificial neural networks (ANN) on the prediction of the chemical composition of forages, using a large NIR database. The study used forage samples (n=25,977) from Australia, Europe (Belgium, Germany, Italy and Sweden) and North America (Canada and U.S.A) with reference values for moisture, crude protein and neutral detergent fibre content. The spectra of the samples were collected using 10 different Foss NIR Systems instruments, only some of which had been standardized to one master instrument. The aim of the present study was to evaluate the behaviour of these different calibration methods when predicting the same samples measured on different instruments. Twenty-two sealed samples of different kind of forages were measured in duplicate on seven instruments (one master and six slaves). Three sets of near infrared spectra (1100 to 2500nm) were created. The first set consisted of the spectra in their original form (unstandardized); the second set was created using a single sample standardization (Clone1); the third was created using a multiple sample procedure (Clone6). WinISI software (Infrasoft International Inc., Port Mathilda, PA, USA) was used to perform both types of standardization, Clone1 is just a photometric offset between a “master” instrument and the “slave” instrument. Clone6 modifies both the X-axis through a wavelength adjustment and the Y-axis through a simple regression wavelength by wavelength. The Clone1 procedure used one sample spectrally close to the centre of the population. The six samples used in Clone 6 were selected to cover the range of spectral variation in the sample set. The remaining fifteen samples were used to evaluate the performances of the different models. The predicted values for dry matter, protein and neutral detergent fibre from the master Instrument were considered as “reference Y values” when computing the statistics RMSEP, SEPC, R, Bias, Slope, mean GH (global Mahalanobis distance) and mean NH (neighbourhood Mahalanobis distance) for the 6 slave instruments. From the results we conclude that i) all the calibration techniques gave satisfactory results after standardization. Without standardization the predicted data from the slaves would have required slope and bias correction to produce acceptable statistics. ii) Standardization reduced the errors for all calibration methods and parameters tested, reducing not only systematic biases but also random errors. iii) Standardization removed slope effects that were significantly different from 1.0 in most of the cases. iv) Clone1 and Clone6 gave similar results except for NDF where Clone6 gave better RMSEP values than Clone1. v) GH and NH were reduced by half even with very large data sets including unstandardized spectra.

• Korean Journal of Environmental Biology
• /
• v.28 no.4
• /
• pp.202-211
• /
• 2010

The variations of physico-chemical factors and the species compositions of phytoplanktons were investigated to analyze the marine ecosystem at the depths during summer in the coast of Dokdo (stations DOK 1-3). The mean values of conductivity (48.9 mS $cm^{-1}$), salinity (32.9 psu) and total suspended solids (57.9 mg $L^{-1}$) were the highest in DOK 1. The biomass (Chl-a) of phytoplanktons was the highest in the surface of DOK 1 (2.61 ${\mu}gL^{-1}$). By the means of physicochemical factors (salinity, turbidity, Chl-a, TN, TP and Si), the water estimated in the coast of Dokdo was more eutrophicated than that in 2008. The phytoplanktons were a total of 42 species in Dokdo, which were composed of 33 species (78.6%) for Bacillariophyceae and 9 species (21.4%) for Dinophyceae. The standing crops of phytoplanktons were the highest ($18{\times}10^3$ cells $L^{-1}$) in the surface of DOK 2 and in the surface of DOK 3, while they were the lowest ($2{\times}10^3$ cells $L^{-1}$) at depth of 40 m of DOK1 and at depth of 30 m of DOK 3. The dominant species of phytoplanktons were Chaetoceros castracanei ($6{\times}10^3$ cells $L^{-1}$) in the surface, Rhizosolenia alata f. gracillima ($3{\times}10^3$ cells $L^{-1}$) at depth of 20 m and Protocentrum compressum ($4{\times}10^3$ cells $L^{-1}$) at the depth of 30 m of DOK 1. At the surface of DOK 2, the dominant species was Bacillaria paxillifer ($6{\times}10^3$ cells $L^{-1}$), while it was Hemiaulus indicus ($12{\times}10^3$ cells $L^{-1}$) at the surface of DOK 3. The DOK 1, which is affected by upwelling, whirlpool and circulation due to the East Korean Warm Current, was the most eutrophicated water body among three stations. The monitoring of marine ecosystem in the coast of Dokdo should be continued to propose the alternatives for water quality and species conservation and to purify the eutrophicated water body due to artificial pollutants as well as natural effectors by the global warming, the climatic change, etc.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.8 no.2
• /
• pp.1193-1199
• /
• 1966

More stable and higher yields in rice paddy depend mainly upon an adequately balanced supply of water for higher yield. Rice paddy is supplied naturally by rainfall but inevitably requires artificial supplenental irrigation for higher yields. Even though it may be true that the water requirement of rice plants is generally higher than those of other crops, the submerged condition is not necessarily required for rice. The moisture requirements of rice vary according to its growing stages and it is possible to increse the irrigation efficiency by means of lessening the loss due to percolation and evapolation in the field. This experiment was conducted on the effect of the various amount of water supply and different irrigation periods for yield and yield components, and was carried out to find out the most suitable irrigation method and to increase the irrigation efficiency for higher yields in rice paddy. Randomized block design with 3 replications was employed where the 3 levels of the amount of irrigation water; (120% moisture contents), unirrigated (90~100%) and more un irrigated candition (80~90% moisture content), and levels of the various irrigation periods; usual, initial, intermediate and final periods, being treated. The results obtained in this experiment are as follows: 1. As for the physical and chemical and soil properfies, and other characteristics, there are no differences among the treatments enough to be effective for the growth of rice plants. 2. Culm length was measured after harvest as shown in table 2. 3. Difference of the amount of irrigation water did not change the culm length and ear length, however it also indicated more apparent increase in final treatment plots thatn that of usual. 3. No difference in the number of ears and number of ears pers per hill was founded treatments both in the difference of water supply and in the various irrigation periods. 4. There is no difference in the maturing rate and 1000 grains weight. 5. The number of panicles and grains and more increased in 80~100% moisture contents soil than those of 120%. and it shows in un irrigated plots, more irrigated plots and control plots in turn. Other wise according to the period\ulcorner of irrigation the trend is appeared in turn initial, usual, final and intermediate treatments.6. Yield as shown in table 7. 8 was more increased in unirrigated plots(90~IOO% moisture content) than the control plots (120% moisture content) by up to 8.2% and also 3. 2% in more unirrigated plots than that of control by periods is shown: usual plots final, initial, inter mediate treatment plots in turn. 7. The above resutts lead to the conclusion that no remarkable, differences in yields and soil properties are made by the unirrigation. However, it is apparent that this treatment has .some advantages in the points that one could spare the amount of water supply for irrigation with more increase in yield. In addition, a higher temperature and a brisk oxygen supply would be possible throug h this treatments. Accordingly, these treatment would be a more reasonable and economical cultivation method of rice for the better harvest.

• Current Research on Agriculture and Life Sciences
• /
• v.15
• /
• pp.69-81
• /
• 1997

For the prevention of worldwide prevalent disease of nuclear polyhedrosis virus (NPV), environmental conditions and their incidence of grasserie was investigated through 57 cases of silkworm rearing from the year of 1979 to 1993 in the countries of Korea, Japan, and Philippines. Relationship between the occurrence of NPV and environmental factors were also analysed from the aspect of causal pathogenesis. Unfavorable foactors related to the prevalence of NPV disease was reconfirmed by the assay of experimental rearing. Silkworms reared on mulberry leaves or artificial diet appeared similar result on the occurrence of grasserie. Disinfection by formalin and simple sweeping or washing was not significantly different on the occurrence of NPV disease. Following insufficient ventilation on the younger larvae. from the 1st to 3rd instar, the disease by NPV at the later stage was remarkably emphasized those insidence. An experimental rearing from 1993 to 1996 demonstrated the prevention of NPV disease by simple cleaning of sweeping under the condition of air forced ventilation, the customal practice of disinfection with formalin or any other chemical agents could be omissible.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.141-148
• /
• 2012

The objective of this study is to remove arsenate from artificially contaminated wastewater using CaAl-ettringite and CaAl-monosulfate which were synthesized in laboratory. The study was carried on the basis of solidification/stabilization of waste using cement. Monosulfate and ettringite are constituents of cement paste. The CaAl-ettringite has a chemical formula of $Ca_6Al_2O_6(SO_4)_3{\cdot}32H_2O$ and has a needle like morphology. Whereas CaAl-monosulfate $Ca_4Al_2O_6(SO_4){\cdot}12H_2O$ has layered double hydroxide structure (LDH) in which the mainlayer consists of Ca and Al and S as interlayer. Ettringite and monosulfate were synthesized by reaction of tricalcium aluminate and gypsum and hydrating this mixture at elevated temperature. The synthesized mineral were characterized by PXRD and FESEM to ensure purity. It was found that concentrations of As(V) in contaminated water were reduced from initial concentration of 1.335 mmol/L to 0.054 mmol/L and 0.300 mmol/L by CaAl-monosulfate and CaAl-ettringite respectively. The post experimental results of PXRD and FESEM analysis indicate that arsenate removal was by ion exchange.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.115-121
• /
• 2017

The present study aimed to obtain basic knowledge of a customized artificial joint based on the convergence research of Digital Imaging and Communications in Medicine(DICOM) and 5-axis machining technology. In the case of the research method, three-dimensional modeling was generated based on the medical image of the humerus bone, and the shape was machined using a chemical wood material. Then, the anatomical characteristics and the modeling machining computation times were compared. The results showed that the Stereolithography (STL) modeling required twice more time for semi-finishing and 10 times more time for finishing compared to the Initial Graphics Exchange Specification(IGES) modeling. For the 5-axis machining humerus bone, the anatomical structures of the anatomic neck, greater tubercle, lesser tubercle, and intertubercular groove were similar to those in the three-dimensional medical image. In the future, the convergence machining technology, where 5-axis machining of various structures(e.g., the surgical neck undercut of the humerus bone) is performed as described above, can be efficiently applied to the manufacture of a customized joint that pursues the precise model of a human body.

• ALGAE
• /
• v.21 no.1
• /
• pp.141-148
• /
• 2006

Benthic diatoms are known as a good food for shellfish in nature and in commercial hatchery of Jeju Island, Korea. Grammatophora marina is commonly found as dominant benthic micro-algae in Jeju coastal waters throughout the year. To know the best growth conditions of this species, culture was done in terms of three parameters; water temperature, salinity and nutrients. Each parameter was controlled by temperature of 15, 20 and 25°C; salinity of 25, 30 and 35 psu; and nutrient concentrations of 50, 100 and 200%. F/2 media was used with artificial seawater for the culture, which was continued for two weeks with L:D cycle 12:12 by using fluorescent light. Maximum specific growth rate was recorded 1.68 d–1 at temperature of 25°C with salinity of 35 psu and nutrient concentration of 200% on 6th day during the culture period. Maximum biomass was also observed 4.9 × 105 cells mL–1 in the same condition. This species may belong to the euryhaline and eutrophic habitat with warm condition. For nutritional aspects of this species, protein, lipid and carbohydrate were measured. The value of protein, lipid and carbohydrate was 4.96%, 15.82% and 5.65%, respectively. The antioxidant activities of 80% methanolic extract were 46.7%, 23.7% and 23.8% on DPPH (1,1-Diphenyl-2-picrylydrazy) radical, superoxide anion radical and hydrogen peroxide scavenging, respectively. Percentage metal chelating activity was 81.2%. Enzymatic extracts of Alcalase and Ultraflow showed remarkable scavenging activities on DPPH radical (86.5% and 57.2%, respectively), and superoxide anion scavenging activities were 45.3% and 41.4% from Kojizyme and Viscozyme extracts, respectively. Extract of Protomex revealed 24.8% activity on hydrogen peroxide and Neutase showed 30.8% on hydroxyl radical scavenging effects. Celluclast and Viscozyme extracts showed 33.2% and 32.1% activities on nitric oxide scavenging, respectively, while Alcalase showed 61.5% on metal chelating. This species contains higher lipids among the biochemical compounds and higher metal chelating activities from both 80% methanolic and enzymatic extracts.