• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.1871-1877
• /
• 1999

An optimal design method using a response surface method for dynamic characteristics of a washer is presented. The proposed method uses the design of experiment and a computer model is used for the experiment. The value of the cost function is estimated using a computer model for each case of the design variable variation. An orthogonal array is used to obtain best cases to be considered with minimum number of experimentation. Using these experimental values, optimal design is performed using a response surface method. The method used in this paper can be applied to any complicated mechanical systems that can be modelled and analyzed by a computer program. The method is applied to the design of dynamic characteristics of a washer.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.340-343
• /
• 2003

This study presents a practical procedure for the Bayesian inversion of geophysical data by Markov chain Monte Carlo (MCMC) sampling and geostatistics. We have applied geostatistical techniques for the acquisition of prior model information, and then the MCMC method was adopted to infer the characteristics of the marginal distributions of model parameters. For the Bayesian inversion of dipole-dipole array resistivity data, we have used the indicator kriging and simulation techniques to generate cumulative density functions from Schlumberger array resistivity data and well logging data, and obtained prior information by cokriging and simulations from covariogram models. The indicator approach makes it possible to incorporate non-parametric information into the probabilistic density function. We have also adopted the MCMC approach, based on Gibbs sampling, to examine the characteristics of a posteriori probability density function and the marginal distribution of each parameter. This approach provides an effective way to treat Bayesian inversion of geophysical data and reduce the non-uniqueness by incorporating various prior information.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.94-100
• /
• 1999

This paper concerns the implementation of a digital neural network which performs the high speed operation of Hopfield model's arithmetic operation. It is also designed to use a look-up table and produce floating point arithmetic of nonlinear function with high speed operation. The arithmetic processing of Hopfleld is able to describe the matrix-vector operation, which is adaptable to design the array processor because of its recursive and iterative operation .The proposed method is expected to be applied to the field of real neural networks because of the realization of the current VLSI techniques.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.24-27
• /
• 2003

High-resolution satellite images at sub-5m footprint are becoming increasingly available to the earth observation community and their respective clients. The related cameras are all using linear array CCD technology for image sensing. The possibility and need for accurate 3D object reconstruction requires a sophisticated camera model, being able to deal with such sensor geometry. We have recently developed a full suite of new methods and software for the precision processing of this kind of data. The software can accommodate images from IKONOS, QuickBird, ALOS PRISM, SPOT5 HRS and sensors of similar type to be expected in the future. We will report about the status of the software, the functionality and some new algorithmic approaches in support of the processing concept. The functionality will be verified by results from various pilot projects. We put particular emphasis on the automatic generation of DSMs, which can be done at sub-pixel accuracy and on the semi-automated generation of city models.

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.459-468
• /
• 1996

This paper considers the problem of realising a parallel EMG identifier used in FES (functional electrical stimulation) system on a fixed dimension transputer array. This involves using an identifiestion algorithm in the wavelet transform domain. This algorithm have suggested by the authors in a previous paper(6). The transputer serial links permit higtlly varied and economic network-type connections and the structure enables rapid topological reconfiguration. Analysing the results Showed that the Speed-UPS ranged from 1.82 to 3.44 With 2-4 transputers for corresponding model order, and from 1.82 to 3.97 with increasing the model orders when two and four transputers are used respectively.

• Wind and Structures
• /
• v.5 no.5
• /
• pp.393-406
• /
• 2002

Aerodynamic pressures and forces were measured on a model of a solar panel containing six slender, parallel modules. Of particular importance to system design is the aerodynamically induced torque. The peak system torque was generally observed to occur at approach wind angles near the diagonals of the panel ($45^{\circ}$, $135^{\circ}$, $225^{\circ}$ and $315^{\circ}$) although large loads also occurred at $270^{\circ}$, where wind is in the plane of the panel, perpendicular to the individual modules. In this case, there was strong vortex shedding from the in-line modules, due to the observation that the module spacing was near the critical value for wake buffeting. The largest loads, however, occurred at a wind angle where there was limited vortex shedding ($330^{\circ}$). In this case, the bulk of the fluctuating torque came from turbulent velocity fluctuations, which acted in a quasi-steady sense, in the oncoming flow. A simple, quasi-steady, model for determining the peak system torque coefficient was developed.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.149-155
• /
• 2018

In this paper, we used ET(Electrical Tomography) for earth resistivity image reconstruction of vertical multi layer underground model. The earth resistivity is analyzed generally as the parallel multi-layer model, however possibly there happens vertical layer model. Here to find the best electrode array in case of vertical layer underground model, Wenner, Schlumberger, and Dipole-dipole electrode arrays, which are well known electrode arrays used in ET, have been tested. And Gauss-Newton algorithm is used in ET inversion. RMS error analysis shows that Wenner electrode array is best in imaging.

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.715-720
• /
• 2012

This paper is to introduce the development of a LCD monitor-based pilots' ship handling simulator installed in the office of Korea Maritime Pilots Association. This simulator is composed of hardware which includes working server array, operation PC, monitor array, rudder, thruster and telegraph peripheral devices, and software which includes ship mathematical model software, ship conning software, image supporting software and so on. In this simulator, MMG mathematical model is used to create thirteen(13) ship models, which are based on sea trial data & pilots' opinion. According to requirements of pilots, virtual scenes of different port areas are built, and some required additional functions are also developed. By using this simulator, pilots can fulfill all kinds of training exercises, design of channel approaching ports, traffic safety analysis, prevention of accident research and other tasks, so as to grasp the characteristics of different ships, and accumulate experience for piloting.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1886-1891
• /
• 2012

In this paper, the analytical models for the electrothermal feedback of a ${\mu}$-bolometer focal plane array(FPA) are proposed and applied to the conceptually designed FPA to investigate the electrothermal feedback effect on bolometer FPA signal. The temperature and resistance change of the ${\mu}$-bolometer by the electrothermal feedback(ETF) model are increased upto 20 and 35.7 % of those of no feedback case, respectively, while those by the effective thermal conductance(ETC) model increased 8.5 and 15.1 %. The integration current and output voltage of a CTIA used as an column amplifier of FPA are also increased upto 41.6 and 32.4 % by the ETF model, while increased upto 17.2 and 13.5 % by the ETC model. The proposed models give more accurate temperature change, accordingly larger signal than no feedback considering case. Electrothermal feedback effect should be considered to design a high performance and high density ${\mu}$-bolometer FPA. The proposed models are very useful to investigate the transient thermal analysis, also considered to be useful to predict the responsivity and dynamic range of ${\mu}$-bolometer FPAs.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.389-393
• /
• 2002