• KIEAE Journal
• /
• v.8 no.5
• /
• pp.43-48
• /
• 2008

This study is about offering quantitatively analytic frame of streetscape, and also about making a way to be standardized and adapt changing landscape. This allows us to manage a form of elevation map after the application to GIS. The form of elevation map is a visible and vertical arrangement method of data recognizable while walking or driving. Applying measurable traits enables us to make a quantitative control over each element of which streetscape consists. After all, it would play a great roll in organizing and maintaining fine streetscape of each city. As the basic ways to make the elevation map, this study proposes the methods of providing quantitative analytic frame of streetscape after applying elevation data, Raster Data and Vector Data, which were investigated on the basis of GIS. In addition, as a simulation for increasing reality, certain streets, where the streetscape is very important, were chosen so that they enable us to utilize quantitatively analytic data of streetscape with analyzing the +degree of opening ratio in the boundary of D/H=2, comparing between wall area and windowpane area, comparing between facade area and sign board area, and calculating both area and ratio which are applied to ecospace.

• Journal of the Korean Institute of Rural Architecture
• /
• v.4 no.3
• /
• pp.23-37
• /
• 2002

Buddhist Architecture should be set for worship and an ascetic life, which is its main function as it is a religious facility and its space and form can be considered as means to achieve efficiently a religious function. Every religion concludes its religious function through its ideas and form of faith based on scriptures and religious precepts. The thing should be paid attention to from this point of view is how Buddhist doctrines are reflected on the architecture and the background recognition about the fundamental doctrines and religious system should be preceded to clarify it. Existing researches have studied the characteristics of Buddhist temples on the point of functional view and architectural spacial view through phenomenal ways. Though fruitful results bore about the Korean space through that way, more internal viewpoint is required to clarify the fundamental regularities and spatial concepts indwelling in temple architecture. Considering what structural elements were required to compose one space in traditional Korean architecture is the fundamental subject and important. This thesis searches architectural characteristics through inquiring about the main building and annexes and understanding symbolic characteristics about the arrangement of the Buddhist statue and solemn things in the Buddhist temples of tangible cultural assets or above located in Seoul area.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.2
• /
• pp.72-78
• /
• 2013

In this study, samples from the site where there occurred unbalanced current when cable routing were analyzed, and the simulation program for electric power system analysis, PSCAD/EMTDC, was used to calculate the current unbalance on cable routing. Based on electromagnetic finite element analysis(FEA), electromagnetic parameters enabled the interlocking with COMSOL for the calculation of allowable current ampacity and magnetic filed distribution. This then led to modeling unbalanced current between common modes using the unbalanced current analysis program, thereby comparing and discussing the results from both. The analyzed model is a common mode 2 parallel circuit, which is a basic model for cable routing, and by arranging cables in various ways, the arrangement with the least current unbalance was suggested, which would, in the future, prevent earth faults and extend life for the whole cable.

• Health Policy and Management
• /
• v.14 no.4
• /
• pp.21-47
• /
• 2004

There is general agreement that the Korean health care delivery system has two basic structural problems. One is the limited capacity and role of public hospitals, and the other is the absence of functional differentiation and referral arrangement between the clinics and hospitals of various technological sophistication levels. This study is intended to make an empirical observation of the system's growth process from the viewpoint of the population ecology model of organizations so as to understand the background of these problems and to find out ways of approaching them. As predicted from the population ecology model of organizations, all the types of medical care facilities have expanded in response to the environmental changes for the past three decades or so, and the differences in the extent and pattern of expansion among the types are related to what have taken place in the environment. These findings suggest that the efforts for reforming the health care delivery system should be directed not only to medical care institutions but also to the environmental context under which they function. It is believed that the usefulness of the population ecology perspective on organizations for studying the health care delivery system has been demonstrated. Thus further studies along this line based upon more strict design would improve systematic understanding of the system that is needed for developing policy approaches needed to increase its effectiveness.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.435-442
• /
• 2000

The present study is conducted to investigate the local heat/mass transfer characteristics for flow through perforated plates. A naphthalene sublimation method is employed to determine the local heat/mass transfer coefficients on the effusion plate. Two parallel perforated plates are arranged for the two different ways: staggered and shifted in one direction. The experiments are conducted for hole pitch-to-diameter ratios of 6.0, for gap distance between the perforated plates of 0.33 to 10 hole diameters, and for Reynolds numbers of 5,000 to 12,000. The result shows that the high transfer region is formed at stagnation region and at the mid-line of the adjacent impinging jets due to secondary vortices and flow acceleration to the effusion hole. For flows through the perforated plates, the mass transfer rates on the surface of the effusion plate are about six to ten times higher than for effusion cooling alone (single perforated plate). More uniform and higher heat/mass transfer characteristic is obtained in overall region with small gap between two perforated plates.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.9
• /
• pp.606-613
• /
• 2015

In this study, the torsional vibration analysis for a marine propulsion system is carried out by using the transfer matrix method(TMM). The torsional moment produced by gas pressure and reciprocating inertia force may yield severe torsional vibration problem in the shaft system which results in a damage of engine system. There are several ways to control the torsional vibration problem at hand, firstly natural frequencies can be changed by adjusting shaft dimensions and/or inertia quantities, secondly firing order and crank arrangement are modified to reduce excitation force, and finally lower the vibration energy by adopting torsional vibration damper. In this paper, the viscous torsional vibration damper is used for reducing the torsional vibration stresses of shaft system and it is conformed that optimum model of the viscous damper can be determined by selecting the geometric design parameters of damper and silicon oil viscosity.

• Korean Security Journal
• /
• no.1
• /
• pp.321-350
• /
• 1997

This thesis is an attempt to find out ways and means needed to improve the disaster management system in Korea(Chap. Ⅰ). For this purpose, I have first reviewed various crisis management systems of foreign countries such as the United States, England and Japan(Chap. Ⅱ), and also reviewed that of our own country(Chap. Ⅲ). All of us knows that our disaster management system has been reestablished through the enactment of the Disaster Management Act of 1995 and the full revision of Natural Harzards Management Act of 1995 after a series of catastrophic man-made disasters since 1993. I took a general survey of the contents and characteristics of the newly made Disaster Management Act(Chap. Ⅳ), and Finally, as a conclusion of this research(Chap. V), I indicated a few disputed points on the Disaster Management Act and suggested several alternatives to improve our crisis management system. The alternatives suggested are as follows (1) Reinforcement of prevention-centered policy and expansion of investment (2) Specialization of the crisis management man-power and securing the rescue equipment (3) Arrangement of the various lessons on crisis and reinforcement of educational training against the disasters (4) Building the cooperative systems between the civil organizations (5) An opinion towards the issues on the unifying the law systems and reorganizaing the new independent institution for the crisis management

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.6
• /
• pp.618-626
• /
• 2017

Conventional high temperature reformers are not suitable for hybrid fuel cell systems that use waste heat as a heat source. So, development of a low temperature type reformer is needed. However, the analysis was conducted in two ways to increase the thermal efficiency, because of low reforming rate due to the low heat source. First, it is a way to ger thermal gain from the outside through partial insulation. In the case of one heat source tube and several heat source tubes, we analyzed the effect of partial heat insulation in some cases. Second, we found the most efficient arrangement of the heat source tubes by changing the location of the heat source tubes. The interpretation was carred out using the COMSOL Mutiphysics program.

• KIEAE Journal
• /
• v.6 no.4
• /
• pp.41-50
• /
• 2006

A greater number of persons with disabilities including an increasing number of aging population has brought concerns on diversity and equality in use of products and environments. Universal design concepts have been introduced rapidly and widely in the built environments in Korea. The purpose of this study was to analyze a model house built in 2006, in the U.S. as a universal design home, systematically examine the universal design model house features, and explore possibility of application of the universal design features in the U.S. into a Korean setting. For this study, site analysis and contents analysis methods were used. Although housing norm, behavioral patterns and environmental contexts would be different, majority of universal design features appeared in the model house were expected to apply. Overall universal design features in the model house sought for attractive, comfort, convenient and safe environment with a little cost. Universal design features in the model house appeared in unobtrusive ways. Universal design considerations on floor materials in living room and bath and furniture arrangement need to modify or replace according to Korean lifestyle.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.2
• /
• pp.95-102
• /
• 2007

This study attempts to propose ways for activated methods of Sancheong tourist resort with Traditional Oriental Medicine(the following this resort) by examining the placement plan, space plan and characteristics of this resort. The results of this study are as follow. First, the accessibility has to be improved for safe and quick transportation between this resort and nearby areas. The curved roads must be replaced by straight roads at least partially. Second, an experiencing space like herb farm is necessary to activate the function of the tourist resort in the aspect of the arrangement planning for this resort. Third, the roads within the complex must be improved into Ring Roads for the circulation of cars to use the space in the tourist resort in a reasonable and positive way. Fourth, various places for tourism must be developed in the rear for sightseeing tours. Moreover, the development of tourism area together with the residents must be achieved with the active participation of the local people in the festival.