• 한국농공학회논문집
• /
• 제57권5호
• /
• pp.19-27
• /
• 2015

The results of Saemangeum seadike field inspection and material testing of armor stones in order to analyze causes of abrasion according to material characteristics of seaside armor stones in Saemangeum seadike are in the following: 1. The armor stones in Saemangeum seadike have been constructed by using internal stones (mainly, sinsi stones) and external stones, which had less strength (77.3 %) and more abrasion rate (133.3 %) compared with sinsi stones. 2. The compressive strength and abrasion rate were compared between ordinary wave section and high wave section for the purpose of analyzing the influence of waves. In compressive strength, sinsi stones were 4.0 % stronger and external stones were 0.6 % stronger in ordinary wave section than those of high wave section in average. In the case of abrasion rate, sinsi stones were 3.0 % higher and external stones were 8.2 % higher in the high wave section than those in the ordinary section. 3. The result of comparing compressive strength according to a zone is that the compressive strength in the Intertidal area was less strong in most of the zones. 4. Considering that deviated stones are moving around over the surface of armor stones in situ, it is important to compare material characteristics. So the comparison test about this factor showed that deviated sinsi stones were stronger than armor stones in situ in terms of compressive strength and resistance to abrasion. Based on these results, abraded armor stones may have resulted from their durability. Therefore it is assumed that armor stones are likely to be abraded when deviated stones which are more durable are moving around over armor stones which are less durable.

• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.187-196
• /
• 2013

This study is focused on analyzing the deformation types of seaside armor stones based of field survey in order to establish the cause of abrasion following the deformation of seaside armor stones. 1. The deformation of seaside armor stone in saemangeum sea dike was classified as three different types: floating, deviation, and abrasion. 2. It was discovered that the stones floated to the extent of maximum 50 m, as the result of inspecting floating stones which were situated on different ten places. 3. The average number of deviation in the high ocean wave section was four times more than that in the ordinary ocean wave section, as a result of comparing the deviation number of the ordinary ocean wave section and that of the high ocean wave section for the purpose of inspecting the relation between the deviation of armor stones and the effects of ocean wave. 4. The angular shape of armor stones seen in the initial construction period has been abraded smoothly, as result of comparing of the shape change of armor stones for the purpose of inspecting abrasion state of seaside armor stones. 5. It was discovered that the abrasion of armor stone was severe in the section of many floating stones, as a result of analyzing the levels of abrasion and the cumulative sections of floating stones for the purpose of investigating the cause of abrasion.

• 한국농공학회논문집
• /
• 제58권4호
• /
• pp.47-55
• /
• 2016

This study is on the stability re-evaluation of armor stones in saemangum seadike according to recently increased sea-level and frequent high wave incoming and the results are in the following. The field inspection of armor stones in the seadike revealed that damages of armor stones have been caused by higher waves than designed waves and that the reconstruction of armor stones and concrete grouting method have been used as the reinforcement work. The result of numerical simulation of wave channel conducted to estimate the safety weight of armor stones influenced by flows revealed that the safety weight of armor stones in the seadike No.4 was estimated as 5.47 tons by using the Isbash method, which is about 122 % more than 4.49 tons estimated by using Van der Meer method. Therefore, in designing armor stones which can be influenced by high waves such as the case of Saemangum seadike, it is necessary to apply the safety weight method of armor stones, based on the Isbash method, which produced the significant figures among the safety weight methods using flows as well as the safety weight method using high waves based on the Hudson method.

• 한국해안·해양공학회논문집
• /
• 제20권3호
• /
• pp.300-309
• /
• 2008

지금까지 연구된 피복석의 부분안전계수는 각 확률변수가 독립이라고 가정하여 계산하였다. 하지만 피복석의 안정공식 중 van der Meer 공식에서 파형경사와 파고는 독립이 아니며 상관성을 가지고 있다. 본 연구에서는 이들의 상관성을 고려한 부분안전계수를 산정하였고 이를 상관성을 고려하지 않은 다른 연구자들의 결과와 비교하였다. 파고와 파형경사의 상관성은 주기의 변동성과 밀접한 관계가 있다. 주기의 변동성이 작아짐에 따라 파고와 파형경사의 상관성은 커지며, 상관성 고려 여부에 따른 계산 결과의 차이가 커진다. 따라서 주기의 변동성이 작은 지역에서는 상관성을 충분히 검토하여 부분안전계수를 산정해야 할 것이다.

• 한국해안해양공학회지
• /
• 제15권3호
• /
• pp.186-189
• /
• 2003

방파제 피복석의 중량 산정을 위하여 여러 가지 경험식들이 개발되어져 왔다 Hudson 식은 많은 결함이 있음에도 불구하고, 형태가 간결하기 때문에 가장 널리 사용되고 있다. van der Meer 식은 가끔 크로스체크 용으로 사용되고 있지만, 식의 복잡성과 관련 변수들의 불확실성 때문에 아주 널리 사용되지는 않고 있다 한편 최근에 유(2003)는 'action slope'라는 새로운 무차원수를 사용하여 형태가 간결한 식을(이후 Yoo 식이라고 부름) 제안하였다. 본 연구에서는, 해안공학 기술자들에게 이 공식들의 사용에 대한 판단 기준을 제공하기 위하여, van der Meer가 1987년과 1988년에 보고한 실험 자료와 비교하여 이들의 정밀도를 평가하였다. 검토 결과, van der Meer 식이 가장 높은 정밀도를 보였으며, Hudson 식은 정밀도가 매우 낮아서 사용에 신중을 기해야 하는 것으로 나타났다. 한편, van der Meer 식보다 정밀도가 약간 낮기는 하지만 형태가 간결한 Yoo 식은 안전율을 약간 높게 잡으면 실무에 사용해도 무방한 것으로 판단된다.

• 한국해양공학회지
• /
• 제35권6호
• /
• pp.403-413
• /
• 2021

As the size of ships increases, the size and output power of their thrusters also increase. When a large ship berths or unberths, the jet flow produced from its thruster has an adverse effect on the stability of quay walls. In this study, we conducted a numerical analysis to examine the impact of the thruster jet flow of a 30,000 TEU container ship, which is expected to be built in the near future, on the stability of a quay wall. In the numerical simulation, we used the fluid-structure interaction analysis technique of LS-DYNA, which is calculated by the overlapping capability using an arbitrary Lagrangian Eulerian formulation and Euler-Lagrange coupling algorithm with an explicit finite element method. As the ship approached the quay wall and the vertical position of the thruster approached the mound of the quay wall, the jet flow directly affected the foot-protection blocks and armor stones. The movement and separation of the foot-protection blocks and armor stones were confirmed in the area affected directly by the thruster jet flow of the container ship. Therefore, the thruster jet flows of ultra-large ships must be considered when planning and designing ports. In addition, the stability of existing port structures must be evaluated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.81.1-81
• /
• 2002

$\textbullet$ This paper presents a study on the development of a walking robot for an armor-stone work of the breakwater construction. The armor-stone work is putting stones about 0.3 ∼ 2m3 on the surface of the breakwater to prevent it from waving. $\textbullet$ This work has been done manually, and its process plan is uncertain by effects of the weather, wave and tide of sea. Therefore the constructional cost is considered to be wasteful $\textbullet$ Working in underwater as well as on land for human workers causes the accident and caisson disease, so it is necessary to replace the process to be mechanized. $\textbullet$ The basic requirements of the robot for mechanizing are as follows : 1) To have a large...

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.121-127
• /
• 2003

Wave overtopping is one of the most important hydraulic responses of breakwater because it significantly affects its functional efficiency, the safety of transit and mooring on the rear side, wave transmission in the sheltered area, rear side armor stones and to some extent, the structural safety itself. In this study, hydraulic model tests has been carried out to investigate the influence of berm's size on overtopping rate by maximum overtopping rate and mean overtopping rate. The hydrodynamic characteristics of berm breakwater by the overtopping rate can be summarized as follows: 1. It is better to use maximum overtopping rate than to use mean overtopping rate for design of coastal structures in the point of view of stability. 2. When construct berm to decrease energy of waves that it was needed to make breaking conditions of wave on the berm. 3. Under the relative length of berm was over 0.13 overtopping rate was significantly decreased. 4. Overtopping rate affected significantly by the relative length of yhe berm than height of the berm.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.113-118
• /
• 2002

Wave overtopping is one of the most important hydraulic responses of breakwater because it significantly affects its functional efficiency, the safety of transit and mooring on the rear side, wave transmission in the sheltered area, rear side armor stones and to some extent, the structural safety itself. The hydrodynamic characteristics of low crest breakwater by the overtopping rate can be summarized as follows: 1. It is better to use maximum overtopping rate than to use mean overtopping rate for design of coastal structures. 2. Maximum overtopping rate was increase with wave steepness (between 0.01 and 0.02). 3. Overtopping rate is decreased when relation length of berm was over wave length.

• 한국해안·해양공학회논문집
• /
• 제28권4호
• /
• pp.191-201
• /
• 2016

추계학적 확률과정을 이용하여 경사제 피복재를 예방적으로 유지관리할 수 있는 조건기반모형을 개발하였다. 완전 보수보강 조건에서 가장 경제적으로 보수보강이 수행되어야 하는 최적의 시점을 결정할 수 있는 모형이다. 본 연구에서 개발된 RRP(Renewal Reward Process) 기반 경제성 모형은 이자율을 고려할 수 있을 뿐만 아니라 기존 연구에서 상수로 취급하던 비용을 시간에 따른 확률변수로 고려할 수 있다. 누적피해와 사용한계 그리고 구조물의 중요도를 모두 고려할 수 있는 함수식을 제시하여 ABM(Age-Based Maintenance)을 CBM(Condition-Based Maintenance)으로 쉽게 확장할 수 있게 하였다. 또한 함수식에 포함된 계수들을 수학적으로 산정할 수 있는 방법도 제시하였다. 두 가지 추계학적 확률과정, WP(Wiener Process)와 GP(Gamma Process)를 이용하여 경사제 사석재를 해석하였다. 사용한계, 이자율 그리고 구조물의 중요도에 따라 시간에 따른 기대총비용율을 산정하여 기대총비용율이 최소가 되는 예방적 유지관리의 최적 시점을 쉽게 추정할 수 있었다. 동일한 사용한계에서 이자율이 높을수록 최적시점은 늦어지고 그에 따라 기대총비용율도 낮아졌다. 또한 상대적으로 GP가 WP보다 더 보수적으로 최적시점을 예측하였다. 마지막으로 동일한 조건에서 구조물의 중요도가 높을수록 더 자주 예방적 보수보강을 실시하여야 한다는 것을 알았다.