• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.1-15
• /
• 2013

Great loss of life and property has been occurred by the severe flood globally. In Korea, a flood inundation map is used as one of the non-structural measures for reducing flood damage, and various inundation models have been studied for flood inundation analysis. This study applies LiDAR data and LISFLOOD model for flood inundation analysis and discusses the the modeling results from levee breaching scenarios for evaluating the applicability of the model to stream inundation modeling. In the results of LISFLOOD modeling, maximum inundation area was similar to the inundation map by HEC-RAS model just less than 4%. The inundation area by each levee breaching scenario showed the difference from 0.2% to 6.5%. Inundation processes were different each other according to the position of levee breach point, and maximum inundation area and depth were changed by the flow direction of stream and flood plain. This study shows that LISFLOOD model can be applied properly to stream inundation analysis using various inundation scenarios.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.4
• /
• pp.59-67
• /
• 2020

In this study, the effects of windbreak fences composed of natural vegetation on one-year-old seedlings were analyzed to develop restoration methods for an endangered subalpine species, the dwarf Siberian pine (Pinus pumila (Pall.) Regel). One-year-old seedlings were planted in 2016 by sowing seeds that had been collected from the Daecheongbong area on Mt. Seoraksan, South Korea, in 2014. The area near Daecheongbong was selected as the experimental site, and treatment and control plots (2m×2m) were installed at the site. To analyze the effects of wind protection, windbreak fences were constructed in the treatment plots using hairy Korean rhododendrons (Rhododendron mucronulatum Turcz. var. ciliatum Nakai) from the surrounding area and weather stations were installed to investigate atmospheric temperature, humidity, and wind speed. In all control plots without windbreak fences, dwarf Siberian pine seedlings were killed by strong winds seven months after planting. In contrast, the average survival rate of the seedlings in treatment plots was 96.7% after seven months, 64.2% after two years, and 45% after three years, with most (85.3%) of the seedlings showing good initial root establishment. Accordingly, windbreak fences composed of natural vegetation are suitable for promoting the early establishment of seedlings in the restoration of dwarf Siberian pine stands.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.637-648
• /
• 2010

The Songbong Formation (so-called Bangrim Group), correated to the lower part of Choseon Supergroup, unconformably overlies the Precambrian Gyeonggi massif at northeastem tip of the Ogcheon belt The contact relationship between the Choseon Supergroup and the Yeongnam massif is also known as an unconformity at northeastem part of the Ogcheon belt. lt implies that the Gyeonggi and Yeongnam massifs were probably connected each other before the Early Paleozoic. Three deformational phases are recognized in the study area, The first phase is the north-northeastward ductile thrusting, which places Precambrian granite of the Gyeonggi massif over the Paleozoic rocks of the Ogcheon belt. The second phase is characterized by the southeastward thrusting and deformation partitioning along the Nuruhaji compartment fault. The third phase is the reactivation of the Nuruhaji Fault into dextral strike-slip fault with over a few kilometers displacement.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.571-581
• /
• 2008

The sea fog occurs frequently in the west coast of Korea in spring and summer. This study focused on the detection of sea fog using MODIS satellite images. We presented a method for sea fog detection based on the homogeneity level between low stratus and sea fog, which was that the top surface of sea fog had a homogeneous aspect while that of low stratus had a heterogenous aspect. The results showed that the both homogeneity of $11{\mu}m$ brightness temperature (BT) and brightness temperature difference (BTD, $BT_{3.7{\mu}m}-BT_{11{\mu}m}$) were available to discriminate sea fog from low stratus. The frequency of difference between BT in fog/stratus area and BT in clear area provided reasonable result. In addition, the threshold values of standard deviations of BT and BTD in the fog/stratus area were applicable to differentiate fog from low stratus.

• Journal of Korean Society on Water Environment
• /
• v.37 no.3
• /
• pp.204-216
• /
• 2021

It is important to understand the factors influencing the temporal and spatial variability of water quality in order to establish an effective customized management strategy for contaminated aquatic ecosystems. In this study, the spatial diversity of the 5-year (2015 - 2019) average total phosphorus (TP) concentration observed in 40 Total Maximum Daily Loads unit-basins in the Nakdong River watershed was analyzed using 50 predictive variables of watershed characteristics, climate characteristics, land use characteristics, and soil characteristics. Cross-correlation analysis, a two-stage exhaustive search approach, and Bayesian inference were applied to identify predictors that best matched the time-averaged TP. The predictors that were finally identified included watershed altitude, precipitation in fall, precipitation in winter, residential area, public facilities area, paddy field, soil available phosphate, soil magnesium, soil available silicic acid, and soil potassium. Among them, it was found that the most influential factors for the spatial difference of TP were watershed altitude in watershed characteristics, public facilities area in land use characteristics, and soil available silicic acid in soil characteristics. This means that artificial factors have a great influence on the spatial variability of TP. It is expected that the proposed statistical modeling approach can be applied to the identification of major factors affecting the spatial variability of the temporal average state of various water quality parameters.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.72-82
• /
• 2022

The anchorage among harbour facilities should ensure sufficient water surface area for safe anchoring. A general method is to consider the L.O.A of the target ship and the depth and bottom quality of anchorage to calculate the water surface area of anchorage. However, the gross tonnage is used as a unit of the ship capacity standard of anchorage based on the detailed rules for harbour facilities operation in Korea. In this study, the gross tonnage is converted to L.O.A to calculate the actual anchoring radius of the target ship. This actual anchoring radius exceeds at 25 anchorages (among 90 anchorages) compared with the designated water surface area. Therefore, as an improvement plan of the ship capacity standard for anchorage, L.O.A should be used as a unit for anchorage based on the detailed rules for harbour facilities operation and related Korean maritime laws.

• The Journal of Engineering Geology
• /
• v.32 no.3
• /
• pp.363-376
• /
• 2022

An area under construction for a living facility collapsed around 12:48 KST on 13 January 2021 in Sa-dong, Ansan-si, Gyeonggi-do. There were no casualties due to the rapid evacuation measure, but part of the temporary retaining facility collapsed, and several cracks occurred in the adjacent road on the south side. This study used the potential of synthetic aperture radar (SAR) satellite for surface property changes that lies in backscattering characteristic to map the collapsed structure. The interferometric SAR technique can make a direct measurement of the decorrelation among different acquisition dates by integrating both amplitude and phase information. The damage proxy map (DPM) technique has been employed using four high-resolution Constellation of Small Satellites for Mediterranean basin Observation (COSMO-SkyMed) data spanning from 2020 to 2021 during ascending observation to analyze the collapse of the construction. DPM relies on the difference of pre- and co-event interferometric coherences to depict anomalous changes that indicate collapsed structure in the study area. The DPMs were displayed in a color scale that indicates an increasingly more significant ground surface change in the area covered by the pixels, depicting the collapsed structure. Therefore, the DPM technique with SAR data can be used for damage assessment with accurate and comprehensive detection after an event. In addition, we classify the amplitude information using support vector machine (SVM) and maximum likelihood classification algorithms. An investigation committee was formed to determine the cause of the collapse of the retaining wall and to suggest technical and institutional measures and alternatives to prevent similar incidents from reoccurring. The report from the committee revealed that the incident was caused by a combination of factors that were not carried out properly.

• Tunnel and Underground Space
• /
• v.33 no.4
• /
• pp.255-264
• /
• 2023

As the demand for urban underground space increases recently, urban tunnel planning is actively progressing. In the urban area, a underground station is planned in consideration of the living environment of residents, and 2-arch tunnel is applied for the stability of existing structures and reduction of environmental damage. However, since the depth of weak rock mass is deeply distributed in the urban area due to severe weathering, careful planning is required to secure tunnel stability. In addition, if TBM mechanical excavation is applied as the main tunnel excavation method considering the composite ground in urban area, the construction connectivity with the 2-arch tunnel of the NATM concept may be deteriorated. In this study, the design case of applying TBM pre-excavation type 2-arch tunnel for the first time in Korea was mainly described. The main considerations for the segment design of TBM pre-excavation type 2-arch tunnel were explained for side tunnels. Also, a stability analysis was conducted to verify the effectiveness and adequacy of the TBM pre-excavation type 2-arch tunnel.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.27 no.1
• /
• pp.17-29
• /
• 2024

This study was conducted to select the restoration priority of forest damage sites in Gangwon Province. We first identified the status of damaged areas. We then selected restoration evaluation indicators through a literature review. We then set weights for these indicators through expert surveys. We next acquired data that can represent these indicators and spatially mapped them. Finally, we prioritized the restoration target sites by taking the weights. The results of the study showed that disaster sensitivity and ecologicality are important criteria for selecting the restoration priority of damage sites. The analysis showed that damage sites in Doam, Jeongseon, Samcheok and Inje are in urgent need of restoration. The results of this study are significant in that they selected the restoration priority of damage sites in Gangwon Province based on the restoration priority evaluation criteria selected based on expert surveys. However, the priority restoration areas derived from the results of this study are not actually implementing restoration projects at present. Therefore, it is judged that it would be efficient in various aspects to establish the restoration priority area based on scientific analysis techniques and carry out the project for efficient implementation of the restoration project. In this study, it can be pointed out that the priority of restoration of damage sites was derived based on data from the past due to the limitation of data acquisition. However, the fact that the priority restoration area inferred based on past data has been restored over time has improved the reliability of the study by verifying the usefulness of the priority extraction technique. In the future, if the priority of damage sites is extracted by extracting the restoration target area boundary through the latest data based on the methodology applied in this study, it is considered that it will be available as a result that can be applied to the field.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2011.09a
• /
• pp.3-21
• /
• 2011

Laboratory experiments and numerical simulations using Particle Flow Code (PFC2D) were performed to study the effects of joint separation and joint overlapping on the full failure behavior of rock bridges under direct shear loading. Through numerical direct shear tests, the failure process is visually observed and the failure patterns are achieved with reasonable conformity with the experimental results. The simulation results clearly showed that cracks developed during the test were predominantly tension cracks. It was deduced that the failure pattern was mostly influenced by both of the joint separation and joint overlapping while the shear strength is closely related to the failure pattern and its failure mechanism. The studies revealed that shear strength of rock bridges are increased with increasing in the joint separation. Also, it was observed that for a fixed cross sectional area of rock bridges, shear strength of overlapped joints are less than the shear strength of non-overlapped joints.