• 제목/요약/키워드: area measuring

Search Result 1,962, Processing Time 0.036 seconds

영구동토 지대에서 Thermal Siphon의 효율성 연구 (An Study on Efficiency and Application of Thermal Siphon in the Permafrost)

  • 강재모;김학승
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.963-966
    • /
    • 2009
  • A Construction of pipe line foundation and railroad, buildings in a permafrost area requires engineering technology of ground stabilization. In the permafrost area, thermal siphons have been used to stabilize foundation by eliminating the heat of ground to the air. the thermal siphon is a passive heat transfer device that operates by convection through vaporization and condensation. The heat transfer from ground to the air is driven by a temperature difference across the unit. A buried part in ground working as vaporizing function and upper part work as condensing. In this study, buried thermal siphon around the pipe lines laid in the Vladivostok site and measuring temperature variation. It is found that the thermal siphons freezing ground faster and decrease temperature variation in winter season.

  • PDF

형상의 이차미분을 이용한 비구면 형상측정기술 개발 (Development of Aspheric Surface Profilometry using 2nd Derivative)

  • 김병창
    • 한국기계가공학회지
    • /
    • 제10권2호
    • /
    • pp.104-109
    • /
    • 2011
  • I present a method of aspheric surface profile measurement using 2nd derivative of local area profile. This method is based on the principle of curvature sensor which measures the local 2nd derivative under test along a line. The profile is then reconstructed from the data on the each point. Unlike subaperture-stiching method and slope detection method, 2nd derivative method has strong points from a geometric point of view in measuring the aspheric surface profile. The second derivative terms of surface profile is an intrinsic property of the test piece, which is independent of its position and tip-tilt motion. The curvature is measured at every local area with high accuracy and high lateral resolution by using White-light scanning interferometry.

A study on consumer's preference for size labeling system of womens's ready-to-wear garments

  • 천종숙
    • 대한인간공학회지
    • /
    • 제15권1호
    • /
    • pp.105-117
    • /
    • 1996
  • This study was initiated to investigate (1) whether consumers preferred a specific garment size labeling system and (2) whether consumer's demographic characteristics, clothing behavior, and body size affect their preference of size labeling systems. The survey of consumer's preferences for five size labeling systems included 443 women with 20 to 64 years of age. The result of the survey showed that the subjects' preferences of five size labeling sysems were different significantly. Subjects strongly preferred the old system rather than the revised systems. The subjects least preferred the system with pictogram(system D) and the system with description of the measuring methods of te control dimensions (system E). The subjects/ preference for various garment size labeling systems was different depending on their resident area, educational level, and body size. The garment size labeling system with more information on body measurements (system C) was preferred by the subjects living in the metro city area or subjects having difficulties on purchasing ready-to-wear garments giving reasonable fit. The simplest size labeling system (system A) was strongly preferred by the subjects of low educational level, or the subjects living in the small city.

  • PDF

실시간 대기오염 지도 작성을 위한 분산형 건강인지 자전거 시스템 구현 (Implementation of Distributed Health-aware Bicycle System for Making Real-time Air-pollution Map)

  • 조중재;유준혁
    • 대한임베디드공학회논문지
    • /
    • 제9권4호
    • /
    • pp.229-235
    • /
    • 2014
  • This paper presents an environmental navigation system which provides a guidance to the users of smart bicycle for a pollution-free route during their travel. The smart bicycle operates as a sensor node being composed of a distributed wireless sensor network over the whole urban area. Several environmental sensors measuring the amount of dust, CO, $CO_2$, $NO_2$ in the air are built into the smart bicycle to estimate the level of air pollution in the located area. Each smart bicycle sends/receives the measured sensor data and the city pollution map to/from the centralized server, which leads the bike-riders to a healthy route by providing the environmental navigation information. The proposed idea and its implementation give a useful insight on various application services with the distributed smart bicycles.

낮은물/알루미나 비에서 비정질 알루미나 분말의 수화특성 (The Rehydration Properties of Amorphous Alumina Powder in Low Water/Alumina Ratio)

  • 박병기;서정권;이정민;서동수
    • 한국세라믹학회지
    • /
    • 제35권10호
    • /
    • pp.1085-1093
    • /
    • 1998
  • Amorphous alumina powder prepared by the fast calcination of aluminum trihydroxide(Al(OH)3 gibbsite) for 0.5 second at 580$^{\circ}C$ was investigated rehydration propeties. Phase composition crystal size and mor-phology surface area pore volume and pore size distribution of pesudo-boehmite and bayerite crystals changed with temperature time water/alumina ratio and particle size when amorphous alumina rehydrated with water. Phase compositions were examined with XRD and DTA and crystal sized morphologies were investigaed with SEM and TEM. Also rehydration properties of amorphous alumina were in-vestigated by measuring the surface area pore volume and pore size distribution.

  • PDF

영상 처리 방법을 이용한 트리 길이와 열화면적 계측 (Measurement of Electrical Treeing Length and Area by Use of Image Processing)

  • 백관현;김재환
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제8권1호
    • /
    • pp.57-62
    • /
    • 1994
  • 영상처리 방식을 이용하여 유기 절연재료의 트리잉 열화를 측정하였다. 전통적으로 목측(가시측정)에 의한 트리현상 변화를 관찰해 왔으나 트리형상 특징과 변화를 이해하는데 정확한 측정에 어려움을 만들었다. 영상처리 시스템을 이용한 트리 측정장치를 이용하여 트리진전길이와 열화면적들의 고유특성을 영상처리 시스템을 이용하여 목측치와 거의 대등한 결과가 나오는 트리진전 영상처리 자동계측 시스템을 구현하였다.

  • PDF

열처리 방법에 따른 실리콘 기판쌍의 접합 특성 (Bonding Property of Silicon Wafer Pairs with Annealing Method)

  • 민홍석;이상현;송오성;주영창
    • 한국전기전자재료학회논문지
    • /
    • 제16권5호
    • /
    • pp.365-371
    • /
    • 2003
  • We prepared silicon on insulator(SOI) wafer pairs of Si/1800${\AA}$ -SiO$_2$ ∥ 1800${\AA}$ -SiO$_2$/Si using water direct bonding method. Wafer pairs bonded at room-temperature were annealed by a normal furnace system or a fast linear annealing(FLA) equipment, and the micro-structure of bonding interfaces for each annealing method was investigated. Upper wafer of bonded pairs was polished to be 50 $\mu\textrm{m}$ by chemical mechanical polishing(CMP) process to confirm the real application. Defects and bonding area of bonded water pairs were observed by optical images. Electrical and mechanical properties were characterized by measuring leakage current for sweeping to 120 V, and by observing the change of wafer curvature with annealing process, respectively. FLA process was superior to normal furnace process in aspects of bonding area, I-V property, and stress generation.

태양폭풍이 항행안전시설에 미치는 영향분석 (Impact of solar storm on Navaids system)

  • 조진호;박재우;정철오;김재훈;김기현;박형택
    • 한국항공운항학회지
    • /
    • 제20권2호
    • /
    • pp.13-17
    • /
    • 2012
  • The solar storm generated by solar activity can be impact on earth in various area. If solar storm impact on Navaids system, it will be a serious problem for aviation and human safety. The impact analysis of solar strom on Navaids system are performed in three area, ILS, GPS navigation and radio communication for aviation. Analysis result show that Instrument Landing System(LLZ, GP, MB) and Navaids system(VOR, DME, Radar) are not impacted by the solar storm, but GPS system is impacted by solar storm. Also analysis result show that VHF/UHF radio system are not impacted by solar storm, but HF radio system is impacted by solar storm.

비접촉식 설면 습윤도 측정 기구의 개발 (Development of the non contact tongue moisture measuring device)

  • 김대복;박유경;김기왕
    • 대한한의진단학회지
    • /
    • 제14권2호
    • /
    • pp.67-74
    • /
    • 2010
  • Objectives: Tongue moisture is one of major features in tongue diagnosis of Oriental Medicine. But with regard to the methods to qualify the tongue moisture level, there have been no adequate modalities to satisfy clinicians' needs. So we developed an novel device and method to quantify the tongue moisture level without contact. Methods and Materials: Ratio of saturated area to total tongue area in the image captured with a spot light at various angles was calculated. We regarded that ratio represented the moisture of tongue surface. To evaluate the performance of suggested method, we observed the correlation between conventional contact method and our method with 19 healthy subjects. Results: With comparison to conventional contact method (Schirmer test), the suggested method showed good correlation (R = 0.8602, R2 = 0.7399). Conclusion: This Method could be a convenient and robust method to evaluate tongue moisture.

Noninvasive Hematocrit Monitoring Based on Parameter-optimization of a LED Finger Probe

  • Yoon, Gil-Won;Jeon, Kye-Jin
    • Journal of the Optical Society of Korea
    • /
    • 제9권3호
    • /
    • pp.107-110
    • /
    • 2005
  • An optical method of measuring hematocrit noninvasively is presented. An LED Light with multiple wavelengths was irradiated on fingernail and transmitted light from the finger was measured to predict hematocrit. A finger probe contained an LED array and detector. Our previous experience showed that prediction accuracy was sensitive to reliability of the finger probe hardware and we optimized the finger probe parameters such as the internal color, detector area and the emission area of a light source based on Design of Experiment. Using the optimized finger probe, we developed a hematocrit monitoring system and tested with 549 persons. For the calibration model with 368 persons, a regression coefficient of 0.74 and a standard deviation of 3.67 and the mean percent error of $8\%$ were obtained. Hematocrits for 181 persons were predicted. We achieved a mean percent error of $8.2\%$ where the regression coefficient was 0.68 and the standard deviation was 3.69.