• Imaging Science in Dentistry
• /
• v.48 no.1
• /
• pp.41-44
• /
• 2018

Purpose: To evaluate the effect of different numbers of basis images and the use of metal artifact reduction (MAR) on the production and reduction of artifacts in cone-beam computed tomography images. Materials and Methods: An acrylic resin phantom with a metal alloy sample was scanned, with 450 or 720 basis images and with or without MAR. Standard deviation values for the test areas (around the metal object) were obtained as a way of measuring artifact production. Two-way analysis of variance was used with a 5% significance level. Results: There was no significant difference in artifact production among the images obtained with different numbers of basis images without MAR (P=.985). MAR significantly reduced artifact production in the test areas only in the protocol using 720 basis images (P=.017). The protocol using 450 basis images with MAR showed no significant difference in artifact production when compared to the protocol using 720 basis images with MAR (P=.579). Conclusion: Protocols with a smaller number of basis images and with MAR activated are preferable for minimizing artifact production in tomographic images without exposing the patient to a greater radiation dose.

• Water for future
• /
• v.17 no.2
• /
• pp.72-79
• /
• 1984

This investagation was carried out by analyzing water types and measuring the environmetal isotopes (tritium and deuterium) for development of water resources and protection of ground waters from sea water intrusion. The water sample were taken monthly from April to June, 1983 from sixteen sites in the Cheju metropolitan area; three sea, three spring, and ten ground waters. The ground water in the midwest area of the city contained 20 TU of tritium and-46 per mille of deuterium, classified as the $NaHCO_3$ type of ground water, generally deep seated. The spring water and ground water in the southern part of the city contained 15 to of tritium and-39 per mile of deuterium, and appeared to the $CaHCO_3$ type of shallow ground water, easily affected 표 precipitation. The results of tritium and deuterium analyses showed that the ground water in the coastal area were not affected by sea water intrusion, although they changed from $NaHCO_3$ or $CaHCO_3$ type to NaCl type in May and June. It is concluded that the high Na and Cl content in those ground waters might come from municipal sewage. The sea water in the Yong-duam area was influenced by sping water.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.1
• /
• pp.43-53
• /
• 2019

In the Geumho River, 4-nitrophenol has been detected, thus it is necessary to investigate the contamination sources in order to prevent the release of this compound. However, the research to estimate the potential source is regarded as complicated research. In this study, the distributions of 4-nitrophenol were simulated and the contribution of the potential sources was estimated using a numerical model(HydroGeoSphere; HGS) and the measuring data of 4-nitrophenol from 2013 to 2017. The altitude data, the land cover data, the flow rates of the tributaries and wastewater treatment plants, and the decay rate of 4-nitrophenol was used as the input data. The results of this research showed that the contribution rates of potential contamination sources in the upstream area were higher than that of the downstream area. Most of the upstream area is the agricultural area, it seemed that 4-nitrophenol was originated from the pesticides. In order to achieve more specific location of sources, an intensive investigation in the upstream is required.

• Design & Manufacturing
• /
• v.17 no.4
• /
• pp.8-13
• /
• 2023

In this study, it was studied whether a new measurement factor "frictional vibration" that occurs due to the material flow of the die and sheet metal in the flange area during deep drawing process, could be measured using an vibration sensor. The blank holder force acting on the flange area during drawing processing acts as a friction force in the opposite direction into which the sheet material flows and causes friction vibration. As the blank holder force increases, the friction force increases, and as the blank holder force decreases, the friction force also decreases. Because of this, friction vibration also increases and decreases in proportion to the size of the blank holder force. According to this theory, whether frictional vibration occurs was measured using a flange simulator and a vibration sensor. The initial pressure was created using a torque wrench, and it was confirmed that the amplitude increased by about 4 times when torque 6 Nm was increased. When the forming velocity was rapidly changed to 300 mm/min, the amplitude increased approximately 4 times. It was confirmed that the amplitude of frictional vibration according to the measurement location was greater the further away from the specimen. It was verified that a new measurement factor "friction vibration" in the flange area can be measured and used for online monitoring.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.411-418
• /
• 2007

The most scientific and reliable method for deciding the tooth color is the instrumental measurement. However, such color measuring instrument shows the difference of the measuring value according to the diversified measuring condition. This study was conducted to evaluate what effect of the labial surface irregularity of the tooth to the result of the color measured by spectrometer. 11 models of the teeth were made by injecting the A2 shade Luxatemp Automix Plus (DMG, Germany) into the impression acquired from 11 adults. Standard disk samples (15 mm diameter, 7 mm thickness) were made with same material. CIE $L^*a^*b^*$ value was measured at the incisal, central, and gingival area of the central incisor, lateral incisor, canine and first premolar using Specbos 2100 (JETI, Germany) spectrometer. Color difference was calculated between labial surface and standard samples. Among all models of the teeth, $L^*\;and\;b^*$ value showed the reducing tendency as they go toward the gingival area, but $a^*$ value showed the increasing tendency. Color difference between model teeth and standard samples showed the most difference at the incisal area, but the gingival area showed the least difference. And the canine showed the least color difference from the comparison of standard sample, and the central incisor showed the highest difference (p < 0.01). Although the visually detectable difference of the measuring value showed notably depending on the type and measured area (p < 0.05), $L^*\;and\;a^*$ value showed notable differences depending more on the measured areas than on the type of the teeth.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.04a
• /
• pp.73-78
• /
• 1993

This study was performed for the purposes of estimating steel corrosion of concrete structures under the environment of seawater. The corrosion of steel was accelerated in artificial seawater with seven kinds of specimen which was embedded in mortar. By measuring choride content in mortar, half cell potential and corrosion area ratio, the degree of steel corrosion can be assumed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.155-159
• /
• 1999

This paper represents analysis of terrestrial DTV field test results over Taejon city area. Thirty three points were selected as measuring points. Signal power, noise power, Segment Error Rate (SER) and equalizer performance was measured. DTV video & audio quality was good over half of test sites. Equalizer could correct signal ghost and improve S/N up to 13.7dB.

• YAKHAK HOEJI
• /
• v.31 no.2
• /
• pp.112-115
• /
• 1987

Gypsogenin was derivatized with 2, 4-dinitrophenylhyclrazine prior to analysis with HPLC. Reversed-phase column (Du pont ODS) was used and the mobile phase was acetonitrile and water (60:40). The effluent was detected at 550nm using an U.V. detector and the retention time was approximately 9.2min. The concentration was quantitated by measuring the area and the detection limit was 0.2$\mu\textrm{g}$.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.323-326
• /
• 1998

The paper describes a theoretical and experimental study on the speed of the torsional elastic waves propagating in an axisymmetirc waveguide whose cross-sectional area varies periodically as an harmonic function of the axial coordinate. The approximate solution of the phase speed has been obtained using the perturbation technique for sinusoidal modulation of small amplitude. The experiment verifying the theoretical result consists of transmitting and receiving torsional waves by magnetostriction and measuring the wave speed in the waveguides with threaded surfaces.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.1 s.41
• /
• pp.137-146
• /
• 1992

As a preliminary work for the interrelations between individuals' learning style and their consumer decision-making styles in purchasing apparel, its theoretical backgrounds were reviewed. Several major approaches to measuring and characterizing learning styles were theories of Hunt, Schroder, Kolb, and sproles. - Relevant literature suggests several consumer decision-making styles including Morchis' and Sproles'. Researches on the practical' implication of theoretical learning styles model in the area of consumer decision-making styles were also explored.