• Structural Engineering and Mechanics
• /
• 제64권2호
• /
• pp.225-232
• /
• 2017

Leaning-type arch bridge is a new spatial structural system composed of two vertical arches and two leaning arches. So far there has been no contrast analysis of leaning type arch bridge with different systems. This paper focus on a parametric study of leaning type arch bridge with different systems to find the influential rules on structural forces and stability and to provide some reference for practical designs. The parametric analysis is conducted with different rise-to-span ratios and bending rigidities of arch ribs by comparing internal forces. The internal forces decline obviously with the increase of the rise-to-span ratio. The bending moments at the centers of the main arches and the leaning arches are sensitive to the bending rigidities of arch ribs. Parametric studies are also carried out with different structural systems and leaning angles of the leaning arch by comparing the static stability. The lateral stiffness of leaning-type arch bridge is less than the in-plan stiffness. Compared with the leaning-type arch bridge without thrust, the leaning-type arch bridge with thrust has a lower stability safety coefficient. The stability safety coefficient rises gradually with the increase of inclining angle of the leaning arch. This study shows that the rise-to-span ratio, bending rigidities of arch ribs, structural system and leaning angles of the leaning arch are all critical design parameters. Therefore, these parameters in unreasonable range should be avoided.

• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.51-69
• /
• 2023

In tied-arch bridges, a properly designed connection between the arch and the deck may become crucial, since the forces in the structure may be significantly reduced. This implies substantial material savings and, consequently, cheaper constructions. The introduction of the Nielsen cable arrangement (composed of V-shaped inclined hangers) in the last century was a milestone because it was able to reduce deflections and bending moments both in the arch and in the deck. So far, the Nielsen cable arrangement has proven to be successful in traditional vertical arch bridges. However, despite its advantages, it has not been widely applied to spatial arch bridges. Thus, this article analyses the difference between the structural behavior of spatial arch bridges with Nielsen-type cable arrangements with respect to those with classical vertical hanger configurations. The main goal is to verify whether the known effectiveness of the Nielsen cable arrangement for classical arch bridges is still preserved when applied to spatial arch bridges. In order to achieve this objective, and as the first part of our study, a set of different all-steel bridges composed of vertical and inclined arches with straight decks have been compared for both cable arrangements. As a major conclusion, for planar vertical arch bridges, the Nielsen-type cable arrangement is always the most effective. In addition, it also seems that, for spatial arch bridges composed of a straight deck and an inclined arch, it still keeps most of its effectiveness as long as the arch is moderately inclined.

• Journal of Chest Surgery
• /
• 제33권8호
• /
• pp.676-680
• /
• 2000

To minimize the period of brain ischemia and the potential for neurologic damage during aortic arch replacement, we used the arch-first technique. First case was a 28-year-old female with extensive aneurysm involving ascending, arch and descending thoracic aorta. Exposure was obtained via a bilateral via a bilateral thoracotomy (clamshell incision) in the anterior 4th right and 3rd left intercostal space with oblique sternotomy. To prepare for arch perfusion, the side-arm graft(10mm) was anastomosed to the aortic graft, opposite the site of the planned anastomosis to the arch vessels. After completing the arch anastomosis under total circulatory arrest(37min) and retrograde cerebral perfusion(12min), aortic graft was clamped on either side and the arch was perfused via side-arm graft for 36min. When distal aortic anastomosis was finished, distal clamp of aortic graft was released and arch vessels were perfused via common femoral artery, and the proximal aortic anastomosis was accomplished. The patient was discharged with no event. Second case was a 48-year-old male with extensive aneurysm involving ascending, arch, and aortic regurgitaiton(grade III/IV). This case was also done using the clamshell incision. Aortic valve replacement was done by valved-conduit(Vascutek 30mm), both coronary artery anastomosis using Cabrol's procedure. Last operation procedure was the same as the 1st case.

• Steel and Composite Structures
• /
• 제19권2호
• /
• pp.405-416
• /
• 2015

We proposed the concept of nominal rigidity of a long-span V-shaped rigid frame composite arch bridge, analyzed the effects of structural parameters on nominal rigidity, and derived a theoretical nominal rigidity equation. In addition, we discussed the selection of the arch-to-beam rigidity ratio and its effect on the distribution of internal forces, and analyzed the influence of the ratio on the internal forces. We determined the delimitation value between rigid arch-flexible beam and flexible arch-rigid beam. We summarized the nominal rigidity and arch to beam rigidity ratios of existing bridges. The results show that (1) rigid arch-flexible beam and flexible arch-rigid beam can be defined by the arch-to-beam rigidity ratio; (2) nominal rigidities have no obvious differences among the continuous rigid frame composite arch bridge, V-shaped rigid frame bridge, and arch bridge, which shows that nominal rigidity can reflect the global stiffness of a structure.

• Journal of Chest Surgery
• /
• 제47권2호
• /
• pp.129-132
• /
• 2014

Various surgical techniques have been developed for the repair of an interrupted aortic arch. However, tension and Gothic arch formation at the anastomotic site have remained major problems for these techniques: Excessive tension causes arch stenosis and left main bronchus compression, and Gothic arch configuration is related to cardiovascular complications. To resolve these problems, we adopted a modified surgical technique of distal aortic arch augmentation using an autologous main pulmonary artery patch. The descending aorta was then anastomosed to the augmented aortic arch in an end-to-side manner. Here, we report two cases of interrupted aortic arch that were repaired using this technique.

• 한국농공학회지
• /
• 제43권4호
• /
• pp.89-96
• /
• 2001

In this study non-linear finite element analysis of dynamic response of steel arch under partially distributed dynamic load was discussed. Material and geometric non-linearities were included in finite element formulation and steel behavior was modeled with Von Mises yield criteria. Either radial or vertical dynamic load was dealt in numerical examples. Normal arch and arch with maximum shape imperfection of L/11,000 were studied. The analysis results showed that maximum displacement at the center of arch was occurred when 70% of arch span was loaded. The maximum displacement at a quarter of arch span was occurred when 50% of arch span was loaded and the displacement was larger than that of center of arch. Ratio of arch rise to arch span within 0.2∼-.3 seems to be appropriate for arch under radial or vertical load.

• Smart Structures and Systems
• /
• 제16권6호
• /
• pp.1069-1089
• /
• 2015

Arch bridges consist of some important components for structural behavior such as arches, sidewalls, filling materials and foundations. But, arches are the most important part for this type of bridges. For this reason, investigation of arch is come into prominence. In this paper, it is aimed to investigate the arch thickness effect on the structural behavior of masonry arch bridges. For this purpose, Goderni historical arch bridge which was located in Kulp town, Diyarbakir, Turkey and the bridge restoration process has still continued is selected as an application. The construction year of the bridge is not fully known, but the date is estimated to be the second half of the 19th century. The bridge has two arches with the 0.52 cm and 0.69 cm arch thickness, respectively. Finite element model of the bridge is constructed with ANSYS software to reflect the current situation using relievo drawings. Then the arch thickness is changed by increasing and decreasing respectively and finite element models are reconstructed. The structural responses of the bridge are obtained for all arch thickness under dead load and live load. Maximum displacements, maximum-minimum principal stresses and maximum-minimum elastic strains are given with detail using contours diagrams and compared with each other to determine the arch thickness effect. At the end of the study, it is seen that the maximum displacements, tensile stresses and strains have a decreasing trend, but compressive stress and strain have an increasing trend by the increasing of arch thickness.

• 응용통계연구
• /
• 제30권6호
• /
• pp.983-991
• /
• 2017

본 논문은 고빈도 시계열 자료 분석을 위한 최신 함수-변동성 functional ARCH : fARCH(1) 모형을 독자들에게 소개하고 국내 자료 적합을 예시하고 있다. fARCH(1) 모형을 KOSPI/현대차 1분 단위 고빈도 수익률 자료에 적합하여 기존의 ARCH 모형에서는 할 수 없었던 다이나믹한 일중(intraday) 변동성을 추정할 수 있음을 보여주고 있다.

• 대한한의학회지
• /
• 제29권5호
• /
• pp.90-95
• /
• 2008

Objectives : The purpose of this study is to evaluate if there is significant correlations between the angle of costal arch and digestion, and BMI(Body Mass Index). Methods : To know the correlation between digestion and the angle of costal arch, we hand-measured the angle of costal arch and made questionnaire about digestion. We analysed the data with Pearson product-moment correlation analysis using SPSS 12.0. Results : There is proportional correlation between the angle of costal arch and digestion. Also wider costal arch shows better appetite, faster speed of eating and more quantity of meal. And someone having wider costal arch has less digestion disorder after eating heavy foods or being anxious. And there is proportional relation between angle of the angle of costal arch and BMI. Conclusions : There is significant correlation between the angle of costal arch and digestion as wider costal arch can digest better. Also it has proportional relation between the angle of costal arch and BMI. We expect that further study about morphology of abdomen will develop our abdominal examination and diagnostic methods.

• 응용통계연구
• /
• 제15권2호
• /
• pp.311-321
• /
• 2002

시계열 자료의 전이함수분석에 있어서 조건부 이분산성을 도입하고 기존의 선형 이분산모형인 Engle(1982)의 ARCH 모형과 더불어 비선형 모형인 베타-ARCH 및 분계점-ARCH모형을 고려하였다. 모형적합절차를 간략히 소개하였으며 제안된 모형을 미국 나스닥지수와 국내 종합주가지수에 적용시켜본 결과 비선형 ARCH 모형이 우수함을 알 수 있었다.