• 한국산학기술학회논문지
• /
• 제8권3호
• /
• pp.444-453
• /
• 2007

최근에 전기 아-크로의 보급과 그 운전으로 전력계통에 전압플리커 및 유효전력변동과 같은 전력품질상의 문제가 발생될 가능성이 높은 것으로 보고되고 있다. 이 문제를 해결할 수 있는 방법에는 대표적으로 무효전력보상방법이 있는데, 이것은 유효전력변동의 전력품질문제해결에는 한계가 있다. 따라서, 본 논문에서는 이의 해결책으로서 X/R 비율에 근거한 유효전력보상 개념과 그 최적앨고리즘을 제안하여 이의 타당성을 모델링과 시뮬레이션을 통하여 검증하였다.

• Journal of Welding and Joining
• /
• 제31권1호
• /
• pp.58-64
• /
• 2013

The following results were obtained, microstructures and tensile properties in arc brazed joints of DP(dual phase) steel using Cu-5.3wt%Sn insert metal was investigated as function of brazing current. 1) The Fusion Zone was composed of ${\alpha}Fe+{\gamma}Cu$ and Cu23Sn2. The reason for the formation of these solid solutions. Despite, Fe & Cu were impossible to solid solution at room temperature. It's melting & reaction to something of insert metal & Base Metal (DP Steel) by Arc. Brazing Process has faster cooling rate then Cast Process, Supersaturated solid solution at room temperature. 2) The increase Hardness of Fusion Zone was directly proportional to the rise of welding current. Because, ${\alpha}Fe+{\gamma}Cu$ phase (higher hardness than the Cu23Sn2.(104.1Hv < 271.9Hv)) Volume fraction was Growth, due to increasing the amount of base metal melting by High current. 3) The results of tensile shear test by Brazing, All specimens happen to fracture in Fusion Zone. On the other hand, when Brazing Current increasing tend to rise tensile load. but it was very small, about 26-30% of the base metal. 4) The result of fracture analysis, The crack initiate at Triple Point for meet to Upper B.M/Under B.M/Fusion Zone. This Crack propagated to Fusion zone. So ruptured by tensile strength. The Reason to in the fusion zone fracture, Fusion zone by Brazing of hardness (strength) was very lower then the base metal (DP steel). In addition the Fusion Zone's thickness in triple point was thin than the base metal's thickness in triple point.

• Korean Journal of Radiology
• /
• 제1권2호
• /
• pp.79-83
• /
• 2000

Objective: To describe the thin-section CT findings of arc-welders' pneumoconiosis. Materials and Methods: Eighty-five arc-welders with a three to 30 (mean, 15)-year history of exposure underwent thin-section CT scanning. The extent of abnormalities detected was correlated with the severity of dyspnea and pulmonary function tests. For comparison, images of 43 smoking males (mean 25 pack-year) who underwent thin-section CT for other reasons (smokers' group) were also analyzed. Results: Fifty-four welders (63.5%) and six smokers (14.0%) showed positive findings. Predominant thin-section CT findings were poorly-defined centrilobular micronodules (30/54, 55.6%), branching linear structure (18/54, 33.3%), and ground-glass attenuation (6/54, 11.1%). In the smokers' group, poorly-defined micronodules were found in four patients, branching linear structures in one, and ground-glass attenuation in one. In welders, the extent of abnormalities seen on thin-section CT showed no significant correlation with the severity of dyspnea or the results of pulmonary funotion test. Conclusion: Poorly-defined centrilobular micronodules and branching linear structures were the thin-section CT findings most frequently seen in patients with arc-welders' pneumoconiosis. Less commonly, extensive ground-glass attenuation was also seen.

• 한국안광학회지
• /
• 제21권3호
• /
• pp.227-233
• /
• 2016

목적: 본 연구는 우세안의 방향과 우세성의 강도, 우세안과 우세손 방향의 일치와 불일치 시의 동적 입체시를 비교해보았다. 방법: 평균연령 $21.06{\pm}2.21$세인 성인 130명(남자 70명, 여자60명)을 대상으로 $3.8cm{\times}3.8cm$ 직경의 가는 링을 이용한 타각적인 방법으로 우세안(dominant eye)의 방향과 강도를 측정하였고, 삼간계(three-rods test, iNT, Korea)를 이용하여 동적 입체시(dynamic stereoacuity)를 측정하였다. 결과: 우세안의 방향에 따른 동적 입체시는 우세성이 없는 중심우세안일 때 $14.97{\pm}13.80$초, 우안 $22.10{\pm}20.01$초, 좌안 $22.31{\pm}20.39$초로 눈의 우세성이 없을 때 더 좋았으나 우세안의 방향과 동적 입체시의 상관성은 매우 낮았다. 우세안의 강도를 Center, Mild, Strong로 구분하였을 때 동적 입체시는 각각 $14.97{\pm}13.80$초, $20.76{\pm}15.73$초, $24.45{\pm}25.60$초로 우세성이 강할수록 나빠지는 결과를 보였으나 우세안 좌안에서 우세성이 Strong으로 강할 때 오히려 동적 입체시가 중심우세보다도 더 좋게 나타났다. 우세안과 우세손 방향에 따른 동적 입체시는 우안과 오른손일 때 $22.63{\pm}20.54$초, 좌안과 왼손일 때 $17.36{\pm}10.13$초, 우안과 왼손일 때 $14.79{\pm}7.05$초, 좌안과 오른손일 때 $22.97{\pm}21.42$초로 나타나 상대적으로 우세손이 오른손보다 왼손인 경우가 빈도수는 낮았으나 동적 입체시는 우세손이 왼손일 때 비교적 좋게 나타났다. 결론: 우세안의 방향과 강도에 따른 동적 입체시의 상관성은 낮았으나 눈의 우세성이 없을때 14.97초, Strong 일 때 24.45초로 우세안 강도가 강할 때 동적 입체시가 나빠지는 경향을 보였다. 따라서 우세안 방향과 강도는 입체시와 같은 양안시기능과 sport vision training, 노안교정과 mono vision과 같은 시력교정 시에 양안균형 면에서 착용자에게 좀 더 편안한 처방을 하는데 고려되어야 요소로 사료된다.

• Toxicological Research
• /
• 제20권1호
• /
• pp.55-61
• /
• 2004

Respiratory effects in full time welders include bronchitis, airway irritation, lung function changes, and lung fibrosis. Welder's pneumoconiosis has been generally determined to be benign and not associated with respiratory symptoms based on the absence of pulmonary function abnormalities in welders with marked radiographic abnormalities. Accordingly, to investigate pulmonary function changes during 60 days induced by welding-fume exposure, male Sprague-Dawley rats were exposed to manual metal arc-stainless steel (MMA-SS) welding fumes with concentrations of 64.8$\pm$0.9 mg/$m^3$ (low dose) and 107.8 $\pm$ 2.6 mg/$m^3$ (high dose) total suspended particulates for 2 hr/day, 5 days/week in an inhalation chamber for 60 days. Pulmonary function was measured every week with whole body plethysmograph compensated (WBP Comp, SFT38116, Buxco Electronics, Sharon, CT). The rats exposed to the high dose of welding fumes exhibited statistically significant (p<0.05~0.01) body weight decrease as compared to the control whereas cell number increase of the bronchoalveolar lavage fluid (BALF) (total cell, macrophage, polymorphonuclear cell and lymphocyte) during the 60 days exposure period. And only tidal volume was significantly decreased in dosedependantly during 60 days of MMA-SS welding fume exposure. This pulmonary function change with inflammatory cell recruitment confirms the lung injury caused by the MMA-SS welding fume exposure.

• Journal of Welding and Joining
• /
• 제26권2호
• /
• pp.85-91
• /
• 2008

In general, the quality of a welding process tends to vary with depending on the work environment or external disturbances. Hence, in order to achieve the desirable quality of welding, we should have the optimal welding condition that is not significantly affected by these changes in the environment or external disturbances. In this study, we used a dual response surface method in consideration of both the mean output variables and the standard deviation in order to optimize the V-groove arc welding process. The input variables for GMA welding process with the dual response surface are welding voltage, welding current and welding speed. The output variables are the welding quality function using the shape factor of bead geometry. First, we performed welding experiment on the interested area according to the central composite design. From the results obtained, we derived the regression model on the mean and standard deviation between the input and output variables of the welding process and then obtained the dual response surface. Finally, using the grid search method, we obtained the input variables that minimize the object function which led to the optimal V-groove arc welding process.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제50권3호
• /
• pp.355-365
• /
• 2011

The purpose of this study is to provide mathematical knowledge for supporting the didactical knowledge on circular measure and radian in the high school curriculum. We show that circular measure related to arcs can be mathematically justified as an angular measure and radian is a well defined concept to be able to reconcile the values of trigonometric functions and ones of circular functions, which are real variable functions. Radian has two-fold intrinsic attributes of angular measure and arc measure on the unit circle, in particular, the latter property plays a very important role in simplifying the trigonometric derivatives. To improve students's low academic achievement in trigonometry section, the useful advantage and the background over the introduction of radian should be preferentially taught and recognized to students. We suggest some teaching plans to practice in the class of elementary and middle school for enhancing teachers' and students' understanding of radian.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.488-493
• /
• 1989

In this paper, the structure of CMAC address mapping is first revisited, and the address hashing function and the random mapping is discussed in the conventional CMAC implementation. Then the effective size of CMAC memory is derived from the modulus property of the CMAC address vector, and a new hashing function for the effective memory mapping is proposed for a CMAC implementation with feasible memory size and no troublesome random mapping. Finally, the performance of the conventional CMAC learning algorithm and that of the proposed new CMAC scheme arc compared via simulations.

• 한국산업융합학회 논문집
• /
• 제3권3호
• /
• pp.229-236
• /
• 2000

This paper proposes on the Hanguel character CAI system using image processing. For this, firstly, the characters written by elementary school students or foreigners arc captured by CCD camera. Secondly, Recognition is accomplished by pre-processing, thinning and recognition processes. Thirdly, strokes are separated and beauty evaluation is done by matching feature value of the input image from the similarity measure function. In particular, this paper describe to define the similarity measuring function using extracted factor values after getting the beauty evaluation factor values of the consonant in the entire CAI system. Finally, the effectiveness of the proposed system is demonstrated by experiments.

• 천문학회지
• /
• 제16권2호
• /
• pp.43-54
• /
• 1983

The present day mass functions of main sequence stars in the well observed open clusters, Hyades, Praesepe, Pleiades, NGC 654 and NGC 6530 arc derived and compared with those computed from the model of time-dependent initial mass function and star formation rate. The agreements between the observed and computed present day mass functions suggest the importance of fragmentation process at the early phase and fragment interaction at the later phase of cluster evolution. This process of star formation is different from that related to the evolution of the solar neighborhood, and also could explain the lack of low mass stars observed in some open clusters.