• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.475-480
• /
• 2000

The transient dynamic-response analysis of fuel-storage tanks of flying vehicles accelerating in the vertical direction is achieved with finite element method. A fuel-storage tank is a representative example of the fluid-structure interaction problem, in which structure and fluid media interact strongly. For the accurate analysis of this complicated fluid-structure system, we employed ALE(arbitrary Lagrangian-Eulerian) coupling method. Two types of fuel-storage tanks, one with two baffles and the other without baffle, are considered to examine the effect of baffles. The fuel-storage tank with baffles shows more uniform hydrodynamic pressure distribution, resulting effective stress in structural region and faster convergence from transient to steady states. MSC/Dytran, a commercial FEM software for the 3D coupled dynamic analysis, is used for this analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.641-645
• /
• 2002

In case of aluminum-cased battery, The ratio of height and base of square is generally above the ten times, square-shaped and problem of non-axis symmetry. It is typical model to set up the analysis method of finite element. The reliable analysis of finite element method is suggested, which is used to investigate the possibility that multi-stage deep drawing and ironing used currently is replaced by backward impact extrusion favorable in the respect of cost production and productivity. The influence of parameter was analyzed and compared, which was considered to analyze the process of large deformation plasticity such as extrusion. Die and billet was made as the same shape of finite element model. The results of experiment show good forming without the rupture and wrinkles with the optimum velocity 100mm/sec obtained by analysis.

• Structural Engineering and Mechanics
• /
• 제16권4호
• /
• pp.423-440
• /
• 2003

Arbitrary Lagrangian Eulerian finite element methods gain interest for the capability to control mesh geometry independently from material geometry, the ALE methods are used to create a new undistorted mesh for the fluid domain. In this paper we use the ALE technique to solve fuel slosh problem. Fuel slosh is an important design consideration not only for the fuel tank, but also for the structure supporting the fuel tank. "Fuel slosh" can be generated by many ways: abrupt changes in acceleration (braking), as well as abrupt changes in direction (highway exit-ramp). Repetitive motion can also be involved if a "sloshing resonance" is generated. These sloshing events can in turn affect the overall performance of the parent structure. A finite element analysis method has been developed to analyze this complex event. A new ALE formulation for the fluid mesh has been developed to keep the fluid mesh integrity during the motion of the tank. This paper explains the analysis capabilities on a technical level. Following the explanation, the analysis capabilities are validated against theoretical using potential flow for calculating fuel slosh frequency.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.783-788
• /
• 2007

Many researches have been studied several vibration control device such as TMD and TLD to reduce the influence of wind or seismic waves for high-rise buildings. TLD provides some advantages such as easy installation and low maintenance cost. However, because of the difficulties in evaluating the characteristics of TLD, the dynamic characteristics of TLD must be investigated by experiment or analysis. In this study, the dynamic response analysis of structure with TLD was carried out to verify the vibration control ability of the proposed TLD for high-rise building. The parameter of interest was chosen by the height of the water level and the frequency of input seismic wave in the same shape of water tank.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2410-2414
• /
• 2008

Human heart valves diseased by congenital heart defects, rheumatic fever, bacterial infection, cancer may cause stenosis or insufficiency in the valves. Treatment may be with medication but often involves valve repair or replacement (insertion of an artificial heart valve). Bileaflet mechanical heart valves (BMHVs) are widely implanted to replace the diseased heart valves, but still suffer from complications such as hemolysis, platelet activation, tissue overgrowth and device failure. These complications are closely related to both flow characteristics through the valves and leaflet dynamics. In this study, the physiological flow interacting with the moving leaflets in a bileaflet mechanical heart valve (BMHV) is simulated with a strongly coupled implicit fluid-structure interaction (FSI) method which is newly organized based on the Arbitrary-Lagrangian-Eulerian (ALE) approach and the dynamic mesh method (remeshing) in FLUENT. The simulated results are in good agreement with previous experimental studies. This study shows the applicability of the present FSI model to the complicated physics interacting between fluid flow and moving boundary.

• 항공우주시스템공학회지
• /
• 제15권6호
• /
• pp.10-18
• /
• 2021

A flame deflector prevents a launch system from thermal damage by deflecting the exhaust flame of the launch vehicle. During the deflection of the flame, the flame deflector is subjected to a high-temperature and high-pressure flow, which results in thermal ablation damage at the surface. Predicting this ablation damage is an essential requirement to ensure a reliable design. This paper introduces a numerical method for predicting the ablation damage phenomena based on a one-way fluid-structure interaction (FSI) analysis. In the proposed procedure, the temperature and convective heat transfer coefficient of the exhaust flame are calculated using a fluid dynamics analysis, and then the ablation is calculated using a finite element analysis (FEA) based on the user-subroutine UMESHMOTION and Arbitrary Lagrangian-Eulerian (ALE) adaptive mesh technique in ABAQUS. The result of such an analysis was verified by comparison to the ablation test result for a flame deflector.

• 화약ㆍ발파
• /
• 제37권3호
• /
• pp.13-24
• /
• 2019

본 논문은 명시적 유한요소 해석을 이용하여 군함이나 수상함 아래의 수중에서 어뢰가 폭발할 때의 파편들의 거동을 조사하기 위하여 작성되었다. 본 연구에서는 LS-DYNA에서 라그랑주-오일러 (ALE) 접근법이라 불리는 유체-구조물 상호작용(FSI) 기법을 적용하여 어뢰파편과 선체의 응답을 관찰하였다. 오일러 모델은 공기, 물, 폭약으로 구성되며, 라그랑주 모델은 파편과 선체로 이루어져 있다. 본 모델링의 핵심은 최악파편이 어뢰로부터 가까운 곳(4.5 m)에 위치한 선체에 파공을 일으킬 수 있는지 여부를 파악하는 데 있다. 시뮬레이션은 별도의 두 단계로 수행되었다. 첫 번째의 예비해석에서는 팽창하는 어뢰의 외피가 찢어지는 데 폭약에너지의 30%가 소모된다는 가정 하에 수중폭발 시의 파편속도에 대해 잘 알려져 있는 실험결과를 토대로 최악파편의 초기속도를 결정하였다. 두 번째의 총괄해석에서는 최악파편이 선체에 부딪치기 직전에 보일 것으로 예상되는 파편의 종단속도를 찾고자 하였다. 그 결과, 주어진 조건 하에서 최악파편의 초기속도는 매우 빠른 것으로 나타났다(400 및 1000 m/s). 하지만 충돌이 발생할 때의 파편과 선체 간의 속도차이는 불과 4 m/s 정도로 매우 작았다. 이 결과는 물에 의한 큰 항력의 영향도 있지만 선체에 부여한 비파괴 조건도 영향을 끼쳤을 것으로 보인다. 하지만 적어도 본 논문에서 가정한 해석조건 하에서는 최악파편의 느린 상대속도로 인하여 선체에 파공이 발생하기는 어려운 것으로 나타났다.

• 한국전산구조공학회논문집
• /
• 제35권6호
• /
• pp.333-342
• /
• 2022

경험식에 기반한 폭발 해석방법은 폭압-시간 이력곡선을 하중으로 적용하여 해석하는 방법이다. 이 방법은 모델링이 간단하고 해석시간이 짧아 효율적이지만, 일부 연구에 따르면 근거리 폭발 해석에는 적합하지 않음이 보고되고 있다. 본 연구에서는 예로써 환산거리 0.4~1.0의 근거리 폭발조건에 있는 RC 보에 대해 해석방법에 따른 결과의 차이 및 원인을 분석하였고, 이를 통해 경험식 방법을 이용한 해석의 적용 범위를 구체적으로 검토 및 확인할 수 있었다. 사용된 유한요소해석 프로그램은 LS-DYNA이다. 해석결과에 따르면, 원거리 폭발 실험 데이터를 근거로 하는 경험식 해석방법은 충격량을 과소평가하고 있었다. 이로 인해 RC 보의 처짐은 측정된 처짐 또는 ALE(Arbitrary Lagrangian Eulerian) 해석결과에 비해 작게 계산되었다. 구조체의 응답이 크게 나타나는 근거리 폭발에 대해서는 ALE 해석방법을 사용하는 것이 더 적합할 것으로 사료된다.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.330-340
• /
• 2005

Compressible two-phase flow is analyzed based on the arbitrary Lagrangian-Eulerian (ALE) formulation. For water, Tamman type stiffened equation of state is used. Numerical fluxes are calculated using the ALE two-phase Godunov scheme which assumes only that the speed of sound and pressure can be provided whenever density and internal energy are given. Effects of the approximations of a material interface speed are Investigated h method Is suggested to assign a rigid body boundary condition effectively To validate the developed code, several well-known problems are calculated and the results are compared with analytic or other numerical solutions including a single material Sod shock tube problem and a gas/water shock tube problem The code is applied to analyze the refraction and transmission of shock waves which are impacting on a water-gas interface from gas or water medium.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.419-424
• /
• 2004

we performed the underwater explosion analysis for the liquefied oxygen tank - a kind of fuel tank of a mid-size submarine, and tried to verify the structural safety for this structure. First, we reviewed the theory and application of underwater explosion analysis using Structure-Fluid Interaction technique and its finite element modeling scheme. Next, we modeled the explosive and sea water as fluid elements, the LOX tank as structural elements and the interface between two regions as ALE scheme. The effect on shock pressure and impulse of fluid mesh size and shape are also investigated. As the analysis result, the shock pressure due explosion propagated into the water region and hit the structure region. The plastic deformation and the equivalent stress highly appeared at the web frame and the shock mount of LOX structure, but these values were acceptable for design criteria.