• 한국해양공학회지
• /
• 제37권2호
• /
• pp.49-57
• /
• 2023

Since Chappelear developed a Fourier approximation method, considerable research efforts have been made. On the other hand, Fourier approximations are unsuitable for deep water waves. The purpose of this study is to provide a Fourier approximation suitable even for deep water waves and a numerical method to determine the Fourier coefficients and the wave properties. In addition, the convergence of the solution was tested in terms of its order. This paper presents a velocity potential satisfying the Laplace equation and the bottom boundary condition (BBC) with a truncated Fourier series. Two wave profiles were derived by applying the potential to the kinematic free surface boundary condition (KFSBC) and the dynamic free surface boundary condition (DFSBC). A set of nonlinear equations was represented to determine the Fourier coefficients, which were derived so that the two profiles are identical at specified phases. The set of equations was solved using Newton's method. This study proved that there is a limit to the series order, i.e., the maximum series order is N=12, and that there is a height limitation of this method which is slightly lower than the Michell theory. The reason why the other Fourier approximations are not suitable for deep water waves is discussed.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권4호
• /
• pp.283-300
• /
• 2019

In this paper, we propose a new semi-analytic approach based on the generalized Taylor series for solving nonlinear differential equations of fractional order. Assuming the solution is expanded as the generalized Taylor series, the coefficients of the series can be computed by solving the corresponding recursive relation of the coefficients which is generated by the given problem. This method is called the generalized differential transform method(GDTM). In several literatures the standard GDTM was applied in each sub-domain to obtain an accurate approximation. As noticed in [19], however, a direct application of the GDTM in each sub-domain loses a term of memory which causes an inaccurate approximation. In this work, we derive a new recursive relation of the coefficients that reflects an effect of memory. Several illustrative examples are demonstrated to show the effectiveness of the proposed method. It is shown that the proposed method is robust and accurate for solving nonlinear differential equations of fractional order.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.876-888
• /
• 2001

For a large scaled optimization based on response surface methods, an efficient quadratic approximation method is presented in the context of the trust region model management strategy. If the number of design variables is η, the proposed method requires only 2η+1 design points for one approximation, which are a center point and tow additional axial points within a systematically adjusted trust region. These design points are used to uniquely determine the main effect terms such as the linear and quadratic regression coefficients. A quasi-Newton formula then uses these linear and quadratic coefficients to progressively update the two-factor interaction effect terms as the sequential approximate optimization progresses. In order to show the numerical performance of the proposed method, a typical unconstrained optimization problem and two dynamic response optimization problems with multiple objective are solved. Finally, their optimization results compared with those of the central composite designs (CCD) or the over-determined D-optimality criterion show that the proposed method gives more efficient results than others.

• 응용통계연구
• /
• 제20권1호
• /
• pp.103-115
• /
• 2007

본 논문에서는 1차 자기회귀모형에서 자기회귀계수에 대한 여러 가지 추정량들의 분포함수에 대한 근사 방법에 대해 연구하였다. 자기회귀계수의 여러 추정량들을 이차형식의 관점에서 이해하고, Na와 Kim(2005)에 의한 안장점근사의 결과를 이용한 새로운 근사법을 제시하였다. 이 방법은 정규근사를 비롯한 기존의 근사법과는 달리 추정량에 대한 근사분포의 유도과정이 불필요하며, 소표본은 물론 통계적 추론의 주요 관심영역에서의 근사정도가 매우 뛰어난 장점을 가지고 있다. 모의실험을 통해 Edgeworth 근사를 비롯한 기존의 여러 근사법보다 효율이 뛰어남을 확인하였다.

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.490-495
• /
• 2007

This research aims to examine accuracy and efficiency of the first four moments corresponding to mean, standard deviation, skewness, and kurtosis, which are estimated by a function approximation moment method (FAMM). In FAMM, the moments are estimated from an approximating quadratic function of a system response function. The function approximation is performed on a specially selected experimental region for accuracy, and the number of function evaluations is taken equal to that of the unknown coefficients for efficiency. For this purpose, three error-minimizing conditions are utilized and corresponding canonical experimental regions constructed accordingly. An interpolation function is then obtained using a D-optimal design and then the first four moments of it are obtained as the estimates for the system response function. In order to verify accuracy and efficiency of FAMM, several non-linear examples are considered including a polynomial of order 4, an exponential function, and a rational function. The moments calculated from various coefficients of variation show very good accuracy and efficiency in comparison with those from analytic integration or the Monte Carlo simulation and the experimental design technique proposed by Taguchi and updated by D'Errico and Zaino.

• 한국정보통신학회논문지
• /
• 제14권2호
• /
• pp.513-520
• /
• 2010

잡음에 의한 열화현상은 디지털화된 데이터의 인지도를 저하시킨다. 따라서 신호의 에지 성분을 보존함과 동시에 잡음을 제거하기 위한 시간영역과 주파수영역의 다양한 방법들이 사용되고 있다. 본 논문에서는 신호에 중첩된 복합적인 잡음을 감소시키기 위해, 웨이브렛 근사 계수를 이용한 새로운 잡음 제거 알고리즘을 제안하였다. 제안된 알고리즘에서는 신호의 에지와 잡음에 대한 구분 성능을 향상시키기 위해, 웨이브렛 근사계수의 누적으로부터 얻어지는 오차함수의 분포특성을 이용하였다.

• 전자공학회논문지D
• /
• 제34D권7호
• /
• pp.8-14
• /
• 1997

The phusical optics approximation to an E-polarized diffraction by a composite wedge provides its diffraction coefficients in terms of finite series of cotangent functions. In this paper, its diffraction coefficients inside the dielectric part are extended to become the exact solution to the perfectly conducting wedge as its relative dielectric constant increases to infinite or decreases to 1. It is assured that the extended diffraction coefficients satisfy the boundary condition at th econducting interface and become zero in the artificially complementary region of the composite wedge.

• 대한수학회보
• /
• 제35권4호
• /
• pp.837-845
• /
• 1998

In this work, we consider Euler approxiamtion for one-dimensional jump-diffusion processes under Yamada-Watanabe type conditions on the coefficients which turns out to converge to the strong solution in uniform $L^1$-sense.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.319-328
• /
• 2006

A simple approximation method for the stress intensity factor at the tip of the axial semielliptical cracks on the cylindrical vessel is developed. The approximation methods, incorporated in VINTIN (Vessel INTegrity analysis-INner flaws), utilizes the influence coefficients to calculate the stress intensity factor at the crack tip. This method has been compared with other solution methods including 3-D finite element analysis for internal pressure, cooldown, and pressurized thermal shock loading conditions. For these, 3-D finite-element analyses are performed to obtain the stress intensity factors for various surface cracks with t/R=0.1. The approximation solutions are within $\pm2.5%$ of the those of finite element analysis using symmetric model of one-forth of a vessel under pressure loading, and 1-3% higher under pressurized thermal shock condition. The analysis results confirm that the approximation method provides sufficiently accurate stress intensity factor values for the axial semi-elliptical flaws on the surface of the reactor pressure vessel.

• 전자공학회논문지B
• /
• 제31B권2호
• /
• pp.45-55
• /
• 1994

In this paper, a block based image approximation technique using the Self Affine System(SAS) from the fractal theory is suggested. Each block of an image is divided into 4 tiles and 4 affine mapping coefficients are found for each tile. To find the affine mapping cefficients that minimize the error between the affine transformed image block and the reconstructed image block, the matrix euation is solved by setting each partial differential coefficients to aero. And to ensure the convergence of coding block. 4 uniformly partitioned affine transformation is applied. Variable block size technique is employed in order to applynatural image reconstruction property of fractal image coding. Large blocks are used for encoding smooth backgrounds to yield high compression efficiency and texture and edge blocks are divided into smaller blocks to preserve the block detail. Affine mapping coefficinets are found for each block having 16$\times$16, 8$\times$8 or 4$\times$4 size. Each block is classified as shade, texture or edge. Average gray level is transmitted for shade bolcks, and coefficients are found for texture and edge blocks. Coefficients are quantized and only 16 bytes per block are transmitted. Using the proposed algorithm, the computational load increases linearly in proportion to image size. PSNR of 31.58dB is obtained as the result using 512$\times$512, 8 bits per pixel Lena image.