• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.4
• /
• pp.219-224
• /
• 1992

A numerical method using the truncated Fourier series is presented to predict the wave potential and water surface profile for two dimensional nonlinear standing waves. The unknown coefficients of the series are to be determined through the Newton solution of nonlinear simultaneous equations given by the governing equation and boundary conditions of the problem. In order to prove the effectiveness of the present method. an existing Stokes-like perturbation method is considered together, and a hydraulic experiment for measuring water surface profile and wave pressure is performed as well. The results are such that the present method can generally give exact solutions even for relatively big wave stiffness regardless of the water depth condition. It also demonstrates its validity by showing double humps in the crest of temporal wave pressure profile which normally appear in strongly nonlinear standing waves.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2617-2620
• /
• 2009

Using Coulomb-Yukawa like correlated interaction potentials of integer and noninteger indices the series expansion formulae in terms of multicenter overlap integrals of three complete orthonormal sets of ${\psi}^{\alpha}$‒exponential type orbitals and linear combination coefficients of molecular orbitals are established for the potential of electrostatic field produced by the charges of molecule, where $\alpha$ = 1, 0, ‒1, ‒2,${\cdots}$. The formulae obtained can be useful for the study of interaction between atomic--molecular systems containing any number of closed and open shells when the ${\psi}^{\alpha}$‒exponential type basis functions and Coulomb-Yukawa like correlated interaction potentials are used in the Hartree-Fock-Roothaan and explicitly correlated approximations. The final results are valid for the arbitrary values of parameters of correlated interaction potentials and orbitals. As an example of application, the calculations have been performed for the potential energy of interaction between electron and molecule $H_2O$ using combined Hartree-Fock-Roothaan equations suggested by the author.

• Journal of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.65-73
• /
• 1999

In this study we present a new improved nonlinear calibration method for vector magnetograms made by the Solar Flare Telescope of BOAO. To identify Fe I 6302.5 line, we have scanned monochromatic images of the line integrated over filter passband, changing the location of the central transmission wavelength of a Lyot filter. Then we obtained a filter-convolved line profile, which is in good agreement with spectral atlas data provided by the Sacramento Peak Solar Observatory. The line profile has been used to derive calibration coefficients of longitudinal and transverse fields, employing the conventional line slope method under the weak field approximation. Our improved nonlinear calibration method has also been used to calculate theoretical Stokes polarization signals with various angles of inclination of magnetic fields. For its numerical test, we have compared input magnetic fields with the calibrated ones, which have been derived from the new improved non-linear method and the conventional method respectively. The numerical test shows that the calibrated fields obtained from the improved method are consistent with the input fields, but not with those from the conventional method. Finally, we applied our new improved method to a dipole model which characterizes a typical field configuration of a single, round sunspot. It is noted that the conventional method remarkably underestimates the transverse field component near the inner penumbra.

• Structural Engineering and Mechanics
• /
• v.17 no.1
• /
• pp.1-14
• /
• 2004

Numerical solution to linear bending analysis of circular plates is obtained by the method of harmonic differential quadrature (HDQ). In the method of differential quadrature (DQ), partial space derivatives of a function appearing in a differential equation are approximated by means of a polynomial expressed as the weighted linear sum of the function values at a preselected grid of discrete points. The method of HDQ that was used in the paper proposes a very simple algebraic formula to determine the weighting coefficients required by differential quadrature approximation without restricting the choice of mesh grids. Applying this concept to the governing differential equation of circular plate gives a set of linear simultaneous equations. Bending moments, stresses values in radial and tangential directions and vertical deflections are found for two different types of load. In the present study, the axisymmetric bending behavior is considered. Both the clamped and the simply supported edges are considered as boundary conditions. The obtained results are compared with existing solutions available from analytical and other numerical results such as finite elements and finite differences methods. A comparison between the HDQ results and the finite difference solutions for one example plate problem is also made. The method presented gives accurate results and is computationally efficient.

• Journal of KIEE
• /
• v.11 no.1
• /
• pp.14-20
• /
• 2001

To design a controller based on the pole placement method, it is necessary to obtain either a target transfer function or a desired characteristic equation which results in the closed-loop response. Specially, a step response in which no overshoot occurs in highly desirable in many applications. In this paper, we present two new present two new prototypes of Type I target transfer functions whose step responses have an overshoot of less than 0.1%. One prototype is obtained by Taylor's approximation of a Gaussian function. It is, however, observed that the response delays increase with increasing order, while the rise times are nearly constant. The other prototype is a modification of the first prototype, so that their transfer function coefficients have particular values in terms of specific parameters ${\gamma}$i and $\tau$ (see section 2). The second prototype gives very useful properties in which step responses are almost the same shape, irrespective of the order. It, also, has no overshoot. Some other properties of the prototypes and an application example are given.

• Steel and Composite Structures
• /
• v.22 no.6
• /
• pp.1281-1299
• /
• 2016

This paper deals with the analysis of vibration of antisymmetric angle-ply plates using spline method for higher order shear theory. Free vibration of laminated plates is addressed to show the capability of the present method in the vicinity of higher order shear deformation theory and simply supported edges of plates. The coupled differential equations are obtained in terms displacement and rotational functions. These displacement and rotational functions are approximated using cubic and quantic spline. A generalized eigenvalue problem is obtained and solved numerically for an eigenfrequency parameter and an associated eigenvector of spline coefficients. The antisymmetric angle-ply fiber orientation are taken as design variables. Numerical results enable us to examine the frequencies for various geometric and material parameters and accuracy and effectiveness of the proposed method is also verified by comparative study.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.1
• /
• pp.45-50
• /
• 1993

The phenomenon of wave diffraction due to structure is an important factor in the wave climate at the site As an approximation, the propagation characteristics of a regular wave train are usually used. instead of those of irregular waves. However, there are great differences between the diffraction coefficients of the irregular waves and monochromatic waves, as shown by Goda (1985). The spectral calculation method. one of the methods to deal with the transformation of random sea waves essentially consists of decomposing a spectrum of the irregular sea state Into various monochromatic components, and assembling the component results by linear superposition. Monoch romatic wave transformation model developed by Chen(1987) is used to make spectral calculation. These calculations agree closely with Goda et al. (1978)'s diffraction diagram for a thin semi-infinite breakwater.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.67-73
• /
• 1998

In this paper, the electron swarm parameters in the 0.5% and 0.2% SF\ulcorner+Ar mixtures are measured by time of flight method over the E/N(Td) range from 30 to 300(Td). The measurements have been carried out by the double shutter drift tube with variable drift distance from the cathod. A two-term approximation of the boltzmann equation analysis and Monte Carlo simulation have been also used to study electron transport coefficients. We have calculated W, $ND_L,\;ND_T,\;\alpha,\;\eta,\;\alpha-\eta$, and the limiting breakdown electric field to gas mixtures ratio in pure $SF_6$+Ar mixtures. The electron energy distribution function has been analysed in $SF_6$+Ar mixtures at E/N : 200(Td) for a case of the equilibrium region in the mean electron energy. The measured results and the calculated results have been compared each other.

• The Korean Journal of Applied Statistics
• /
• v.29 no.2
• /
• pp.291-299
• /
• 2016

This paper discusses how to establish estimable functions when there are fixed and random effects in design models. It proves that estimable functions of mixed models are not related to random effects. A fitting constants method is used to obtain sums of squares due to random effects and Hartley's synthesis is used to calculate coefficients of variance components. To test about the fixed effects the degrees of freedom associated with divisor are determined by means of the Satterthwaite approximation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.6
• /
• pp.916-922
• /
• 2001

A mechanical face seal is a tribo-element intended to control leakage of working fluid at the interface between a rotating shaft and its housing. Leakage of working fluid decreases drastically as the clearance of the mating seal faces gets smaller. But the very small seal clearance results in an increased reduction of seal life because of high wear and heat generation. Therefore, in the design of mechanical face seals a compromise between low leakage and acceptable seal life is important, and it presents a difficult and practical design problem. A fluid film or sealing dam geometry of the seal clearance affects seal lubrication performance very much, and thereby it is one of the main design considerations. In this study the Reynolds equation for the sealing dam of mechanical face seals is numerically analyzed, using the Galerkin finite element method, which is readily applied to various seal geometries. Film pressures of the sealing dam are analyzed, including the effects of the seal face coning and tilt. Then, lubrication performances of the seals, such as opening forces, restoring moments, leakage, and dynamic coefficients, are calculated, and they are compared to the results obtained by the narrow seal approximation.