• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1064-1072
• /
• 2001

It is very important to evaluate material degradation like temper and carbide embrittlements to secure the reliable and efficient operational conditions and to prevent brittle failure in service. The extent of material deterioration can be accurately evaluated by mechanical test such as impact test or creep test. But it is almost impossible to sample a large specimen from in-service plants. Thus, the material degradation evaluation by a non-destructive method is earnestly required. Recently the non-destructive test technique which uses the grain boundary etching characteristics owing to the variation of material structures has been proposed. However the program for material degradation evaluation using the grain boundary etching method(GEM) in Windows 98 domain doesnt be developed now. The aims of this paper are to develop the program and to complete the new master curve equations for the evaluation of material degradation on in-serviced high temperature components.

• 한국음향학회지
• /
• 제30권5호
• /
• pp.295-302
• /
• 2011

본 연구의 목적은 말지각평가의 기초 자료가 되고 청각장애 자음지각능력의 정량적 정성적 평가가 가능한 음소단위의 한국어자음지각검사 (Korean Consonant Perception Test, 이하 KCPT)도구를 개발하는 것이다. KCPT는 조합 가능한 모든 한국어 단음절어 중 유의미 단음절어만 분류하여, 7종성발음규칙을 적용하고 목표단어의 친숙도를 조절한 사지선다형 초 종성검사문항 시안을 작성한 후, 각 단어들의 조음 특성, 난이도, 음소 출현빈도수를 고려하여 완성되었다. 이를 정상인 20명을 대상으로 평가하여 난이도가 높은 문항을 제거하고 화자 간 변수가 없는 것을 통계적으로 확인한 후 회화체 빈도수에 맞도록 최종문항을 작성하였다. 세부적 수정을 거쳐 초 종성검사문항 각 200개와 100개로 구성된 총 300개 문항을 개발하였다. 30명의 청각장애인을 대상으로 검증하여 A와 B로 구분한 절반목록간 차이도 없음을 확인하고 초성검사문항은 초성자음지각평가에 종성 검사문항은 종성자음 지각평가에 적절한 도구임을 검증하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권2호
• /
• pp.39-45
• /
• 2008

Formaldehyde and volatile organic compounds (VOCs) are emitted from wood-based panels that have been made using wood particles, wood fiber, wood chips, formaldehyde-based resins and so on. In this study, we examined formaldehyde and total VOCs (TVOC) emission behaviors for plywood overlaid with water-soluble phenolic resin impregnated linerboard (PL), and two kinds of surface materials (decorative veneer and pre-impregnated finishing foil) that were adhered onto the PL that named DPL and PPL. EVA (ethyl vinyl acetate) was used to overlay the decorative veneer and pre-impregnated finishing foil on the plywood with water-soluble phenolic resin impregnated linerboard by a hot press instrument. The debonding test and accelerated aging test were conducted to assess their mechanical properties. Formaldehyde and TVOC emission concentrations were measured using the FLEC method and a VOC Analyzer, respectively. The debonding test results of PL, DPL and PPL were 1.2, 1.5, and $0.5N/mm^2$, respectively. The surface appearance of the samples were not changed after the accelerated aging test. The PL and DPL exhibited reduced formaldehyde and TVOC emission levels, respectively. In the case of PPL, the VOC value was relatively higher than those of PL and DPL.

• 한국식품영양과학회지
• /
• 제11권4호
• /
• pp.37-41
• /
• 1982

In order to determine the optimal condition for making Yugwa (one of the Korean traditional cake) the textures in various conditions were studied by sensory test and texturometer. The changes of texture and fat content in the cake were measured along the period of storage. The results were as follows: (1) The cake were classified in 3 groups according to the leavening agent used in the procedure, namely refined rice wine (W), distilled liquor (L) and yeast group (Y). It was the refined rice wine group that had been 'the best' by sensory test. Its brittleness $(1.40{\pm}0.27)$ was higher than those of L and Y. (2) Crispness measured by bend test prior to soaking into syrup were 1.19, 1.23 and 1.63 in W, L, Y, respectively. (3) Chemical composition (%dry basis)) of Yugwa leavened with W included 9.3 of moisture, 1.3 crude protein, 6.7 crude lipid, 66.4 carbohydrate and 16.3 crude ash. (4) Brittleness decreased gradually along the period of storage while the rancidity increased. From the 40th days of storage, the change of brittleness and rancidity were marked as well as the scores of sensory test decreased significantly. (5) Content of linoleic acid in Yugwa decreased along the period of storage from 52.5% of total fatty acid on the first day to 10.9% on the 50th days Main fatty acids in Yugwa were oleic acid, palmitic acid and stearic acid, all of which were also decreased in content along the period of storage. One remarkable change was the appearance of an unknown fatty acid with 19.54 of retention time, in 50% of total fatty acid, on the 50th day of storage.

• 자원리싸이클링
• /
• 제23권4호
• /
• pp.47-57
• /
• 2014

본 논문에서는 비정질 강섬유의 길이 및 혼입률 변화에 의한 섬유보강콘크리트의 작업성과 섬유분산성에 대한 기초연구를 수행하였다. 일반적인 슬럼프시험 외에 역슬럼프 및 베베시험을 이용하여 일반 강섬유와는 외관 및 형상이 다른 비정질 감섬유의 유동성을 평가하였다. 실험결과, 얇은 판상형의 비정질강섬유의 작업성 평가를 위해서는 일반적인 슬럼프시험보다는 진동 하에서 수행된 역슬럼프 및 베베시험을 통한 유동성 평가가 바람직한 것으로 나타났다. 결론적으로 섬유의 혼입률 및 길이 증가는 콘크리트의 유동성을 현저히 감소시켰으며, 시멘트 메트릭스내에서 섬유간 간격 또한 감소시키는 결과를 보여주었다.

• Archives of Pharmacal Research
• /
• 제16권1호
• /
• pp.50-56
• /
• 1993

The microencapsulation of sodium naproxen with Eudragit. RS was studied by coacrtvation/phase separation process using Span 80 in mineral oil/acetone system. Various factors which affect the mciroencapsulation, e.g., stirring speed, and surfactant concentraction, Eudagit RS concentration and loading drug amounts were examined. For the evaluation of the prepared microcapsules, release rate, particle size distribution and surface appearance as well as in vivo test were carried out. The addition of n-hexane and freezing of microcapsules accelerated the hardening of microcapsules. The optimum concentration of Span 80 ti prepare the smallest microcapsules was the same value with the CMC of Span 80 in solvent system. When 1.5% (w/w) Span 80 was used, the smallest microcapsules were formed $(30.02\pm5.05\mu$ in diameter) belonging to the powder category showing smooth, round and uniform surface. The release of sodium naproxen was retarded by microencapsulation with Eudragit RS. The Eudragit RS microcapsules showed significantly increased AUC and MRT and deceased Cl/F in rabbits.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.283-288
• /
• 2008

Since installing a balcony can significantly reduce the spread of fire, fire spread to the upper levels was confirmed, comparing the cases with and without balcony extension. It was confirmed that the fire can spread not only to the next higher level but also to two levels higher due to the outburst of flame which reached a significant temperature in the case without balcony, while the possibility of fire spread to the upper level reduced considerably with the balcony. this study is compared and analyzed to vertical diffusion appearance of an externally venting flame. An installed balcony is also applied to fire test 6.54kW to analyze about effect of a balcony.

• 대한인간공학회지
• /
• 제26권1호
• /
• pp.47-53
• /
• 2007

The uncanny valley is a hypothesis about robotics concerning the emotional response of humans to robots and other non-human entities. Although it stands today as one of the robots and synthetic characters, the uncanny valley was speculative and few studies have been performed to test the theory. In two experiments, a total of 183 participants were employed to explore this hypothesis. The results of experiment 1 indicate that the perceived human likeness of a robot is not a key factor causing uncanny valley. And the results of experiments 2 suggest that even if the appearance and motion of a robot become fully human, the emotional response of humans could not reach human-human empathy levels.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.579-584
• /
• 2008

The importance and the interest of wind load have emphasized since the damage of the Jeju World cup Stadium and Main Stadium of Busan Asiad in 2002, and the appearance of high-rise buildings. In general, a evaluation for the wind load acting on structures have been carried out mainly through the wind tunnel test, but this technique has the huge shortcomings that consume too much cost and experimental time. However, with the rapid advances on computers, it is possible to analyze the wind pressure distribution acting on structures by numerical scheme. In this paper, to predict the wind pressure distribution acting on shell structures having the various shape by numerical simulation, governing equations of fluid flow and turbulent model is formulated. Also, evaluates the wind pressure coefficient in accordance with the structural shape for shell structures like as a membrane structures and dome structures.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.89-98
• /
• 2001

Pb-free wave soldering process of AC Adapter was implemented by six sigma method using Sn-Cu-Ni type solder. The solder joint appearance, microstructural change, a lift-off phenomenon and reliability were evaluated through thermal shock teal. $(Cu,Ni)_6Sn_5$-type intermetallic compound of which thickness is about 5 micron was found at solder joint between Sn-Cu-Ni solder and copper land. After applying the thermal shock test of as-soldered product up to 750 cycles, no crack was found at the solder joint and the newly developed product was superior to conventions; one in terms of productivity and reliability.